iiinova — where your digital self keeps evolving

Reposted by dj505

Lightning⚡ @lightningxce.bsky.social · 20/09/2026

Glad to see Silvagunner preserving some high quality rips from @stepmaniax.com youtu.be/EE5dyX89V1Q

youtu.be

The Feeling (Big Orgus) (Full Version) - StepManiaX

YouTube video by SiIvaGunner

0186

Reposted by dj505

The Cutting Room Floor @tcrf.net · 01/09/2026

It's good to be back :D tcrf.net/The_Cutting_...

351302302

Reposted by dj505

Albasoup @albasoup.itch.io · 29/08/2026

Was walking past this building and through the window saw this backrooms-ass room, so I accidentally took the coolest picture ever due to the window's reflection

A backrooms-ass room with a twilight sky and trees seemingly imposed over it in a dream-like fashion (it's the reflection of the window)

205245765884

Reposted by dj505

シャポコ🌵 @shapoco.net · 16/08/2026

らくがき

011730

Reposted by dj505

gloriouscow.bsky.social @gloriouscow.bsky.social · 06/08/2026

The following emoji are a valid DOS executable. 🐸☺️😖🐰😗😯😯😯😯😯😯😯😹😯🕳️😯🐮🐐🐐🐐🐐🐐🐐🐐🐐🐐🐐🐐🐐🐐🐐🐐🐐⭐🍽️🍽️🍽️🍽️🐮🐰😔😬😬🗓️🍽️👁️📗🐪🗓️🧮🧯📗🐪🐮🗓️😿🧯🧯🧯🧯📗🐪🗓️🐮📗🐪🗓️🧮🧮🧯🧯👁️📗🐪🐮🗓️🧮🧯🧯🧯🧯🧯🧯📗🐪🗓️😿🧯🧯🧯🧯📗🐪🗓️😿🍽️🍽️🍽️🍽️🐮📗🐪🐮🗓️😯🍽️🍽️👁️📗🐪🐮🐮🐮🗓️😿🧮🧮🧮📗🐪🗓️🧮👁️👁️🍽️👁️📗🐪🐰😔🐐🐐♿🇹🇭⏪✋💕🐀🍥🐐📣🈚🌌🌋🏐🌕👻🌺🌻🍵🆙🌮🍝🌐🌋🍠🌋🐅🍜💒🌳👹🎇👹🉑🎎🉑💞🆖🌳🆎🎇👹🉑🎎🉑💞🐖👯🆖🌻🕕🌿🐐🍙👺👽🌳👹🎇💗🉑🎎🉑💞🖕🎎🌙👻🌺🌻🐻🎂🌻🌳👮🐖🐸🍤🕕🌻🐠🐻🍝🌻🌳🌷🐎🌷🍭🌌💗👻🐖🐖🌜🌛📛🍕🍓🍪🍷🌙🍘🍾🍪👻🌺🌻🌙🌘🌙🐗🌊🏐💗🎐🧯🔥🌉

16503173

Reposted by dj505

caldenza @caldenza.gg · 31/07/2026

www.gofundme.com/f/fund-expen... Hey! We have the last Aerosmith: Quest For Fame in the world. We're trying to crowdfund to cover the expenses to preserve it. This is a unique piece of rhythm game history, and we plan to place it in a public arcade! Any support would be wildly appreciated!

513983

Reposted by dj505

jessamyn @librarian.bsky.social · 31/07/2026

I work at a public library. People who want to use AI seem to have no trouble doing so. People who don't want to use AI have a harder time. I crowdsourced and then finalized this document "How to disable or avoid intrusive AI" and then gave it a short URL: notoai.org Please pass along if it's useful

An aircraft passenger oxygen mask: a drop down passenger mask with air bag and yellow plastic mouth and nose cover, oxygen tube has been cut; Demonstration model used by flight attendant crew for passenger instruction. Has text on the side indicating that it's non-functional.

193126027994

Reposted by dj505

Game Boy Camera @gameboycamera.com · 29/07/2026

Years in the making, I finally have a working prototype of my Camera GBD-M2 (previously shared as Game Boy Camera M2). A sequel to the Game Boy Camera M1, this new redesign uses original Game Boy Pocket & Game Boy Camera chips into a camera-like shape roughly the same size as the Ricoh GR III.

A photo of the Camera GBD-M2 back, in my hand with grass in the background. It's attached to a camera strap.

A photo of the Camera GBD-M2 front, in my hand with grass in the background. It's attached to a camera strap.

321086296

Reposted by dj505

Mosaic Pawprint @mosaicpawprint.com · 27/07/2026

Urgent question for ITG players. Which color do you use if you play with Simply love theme? Please answer asap. Sharing for the reach is greatly appreciated.

181212

Reposted by dj505

Jorts @jortswubs.bsky.social · 17/07/2026

Made it to the semifinals of the Andamiro music contest - please like: www.youtube.com/watch?v=Wyso...

youtube.com

[The 5th AM Music Contest] 15. Jorts - ELEVATE

YouTube video by 펌프잇업공식 PUMP IT UP Official

14327

Reposted by dj505

bloom.sys @bloomsys.bsky.social · 17/04/2026

have you seen the new BMS song? it's on maimai. it's literally in arcaea. it's on lanota with ads. it's literally in chunithm. you can probably find it in wacca. dude it's in orzmic. it's a phigros original. i've played it in cytus. they put it in ravon. it's in ongeki. ongeki has it for you.

714877

Reposted by dj505

VKIM @vkim.xyz · 11/06/2026

GRAC (South Korea's video game content rating board) released the product overview document for Pump It Up Phoenix 2 which is set to release first in Korea this month. I figured I'd take some time to share some stuff and my own observations from it 🧵 [1/?]

2187

Reposted by dj505

DuckDuckGo @duckduckgo.com · 29/05/2026

Since Google revealed its plans for an AI search overhaul, visits to our "No AI" search page have tripled…and they’re still rising! Want to make it your default on Chrome or Firefox? Grab our No-AI extensions and banish AI-assisted answers, chat, and AI images. (1/3)

316148605239

dj505 @5panel.dance · 20/05/2026

The overlap between Pebble watch owners and StepManiaX players probably isn't big, but I recently published my first watchapp - a lil SMX companion! I'm very new to C and JS, so I'm proud to have made something functional :) Compatible with all non-round models! apps.repebble.com/136139ee8be1...

apps.repebble.com

SMX Buddy - Pebble Appstore

All the StepManiaX stats you wanna see, right on your wrist! SMX Buddy pulls useful data, like your 3-digit QuickPIN, profile QR code, step statistics, and i

0186

Reposted by dj505

Taro@PROJEKT GODHAND 2.0 @taronuke.net · 21/04/2026

i always forget i put this in that chart and it makes me laugh every time

521066

Reposted by dj505

ARCstage @arcstage.bsky.social · 29/03/2026

New Arrivals at ARCstage! 2x Vewlix Fighting Game Cabs Custom ITG (In The Groove) setup As we roll these out and fine tune these cabs, we will have them priced down to 10 credits for the next week or two. Hope to see you all here!

021

dj505 @5panel.dance · 06/03/2026

I don't know how many of yall actively keep up with my silly little projects & stuff, but now that I'm making more things worth posting about, I think it's worth mentioning for anyone that might stumble upon them: I don't support generative AI, and I don't use it in any part of anything I make!

010

dj505 @5panel.dance · 06/03/2026

Wrote up a little blog post on ko-fi since I haven't posted there in a while! In this one, I go over some of the major changes I made to the second revision of the "Meshlet" PCB I designed for use with Meshtastic, and what warranted a full redesign after the first attempt. ko-fi.com/post/Meshlet...

ko-fi.com

Meshlet... V2!! An even tinier mesh network node!

dj505 published a post on Ko-fi

010

Reposted by dj505

salty @owatasalty.bsky.social · 30/01/2026

what a lovely da- WOAHHH giant don in the sky

Don-chan from Taiko no Tatsujin flying in the clear sky above a flat landscape with overgrown grass, trees and a river

2756314

Reposted by dj505

Twilight @twilightpb.bsky.social · 26/01/2026

I ported Super Monkey Ball to a website. You can access it in the replies. (or just type what you see in the video, I'm not your boss.)

7149132216

dj505 @5panel.dance · 09/01/2026

Major progress! I did have to cheat a bit using the internal layers to route some power traces, but that should be fine, I think. All the important stuff is routed over unbroken ground. But this makes my first real 4-layer design! Test batch coming soon, after I make the silkscreen look nice 💪

A top-down shot of a render of a densely packed circuit board. There's a USB C port on the top right, a button roughly in the middle, several jumper pads along the bottom left, and 3 status LEDs along the bottom middle.

A top-down shot of the same render, but this time it's the back. There's a battery connector on the left, a battery chemistry selection jumper on the bottom left corner, and footprints for both the LoRa radio and a Raspberry Pi RM2 wifi module along the right.

A screenshot of the PCB layout as seen in the editor. The red top layer is highlighted in this screenshot.

020

dj505 @5panel.dance · 06/01/2026

Meshlet v2 on the way!! I managed to shrink down the PCB plenty without losing features! Just no more unnecessary parts for debugging or testing (or because I misread the datasheet lol oops) This board clocks in at only 42*32mm -- and it shouldn't die as soon as the wifi module tries to transmit!

Top-down view of an unfinished PCB, featuring several nicely laid out jumpers and LEDs, alongside many neatly organized chips.

Alright, maybe not *that* neatly organized. But it's plenty better than the last one.

A screenshot of the back side of an unfinished PCB. There are footprints visible for a battery connector, power input, LoRa radio module, and Raspberry Pi RM2 wifi module. The battery connector is pointing away from the edge of the board, instead of towards the outside, to allow for easier and slimmer case designs.

A screenshot of the unfinished PCB being routed. It's a mess, and there are several light blue lines connecting pins that have not yet been routed. It'll look better soon! I promise!

120

Reposted by dj505

Eric Migicovsky @ericmigi.com · 02/01/2026

Meet Pebble Round 2 - the most stylish Pebble ever $199 on rePebble.com

5228739

dj505 @5panel.dance · 31/12/2025

There's something extra satisfying about designing your own hardware. Not just the 3D printed shell, but the electronics inside, too. Like. I *made* that!! For once I didn't just put an off-the-shelf board into a neat little case!! Now that I know what needs revising, I can get started on v2 🥳

A photo of a Meshtastic node sitting atop a wooden surface. It's a basic device, in a nondescript black 3D printed shell. It has an antenna sticking out the upper left corner, and a mechanical keyboard switch (Kailh Choc red, in case you're curious) on the lower left corner. There's a screen in the middle displaying some information about the node. Above the screen, the word "MESHLET" is engraved into the shell.

0152

dj505 @5panel.dance · 25/12/2025

Got some updates after a day of testing! Things that work: - LiPo charging via both inputs! - Solar charging, even with those tiny cheap 5v panels! - BME280 temp/etc sensor - 3 channel power monitoring - WiFi! Things that don't: - Trying to use a single 200mA 3v3 LDO to power everything. - Oops.

110

dj505 @5panel.dance · 24/12/2025

Signs of life!! Just waiting on the radio modules...

A photo of a PCB sitting on top of a battery, which is sitting on the edge of a desk, in front of a keyboard. There are two bright LEDs on one side of the PCB, one white and one red, but they're so close together that they blend into one point of light. There's a yellow USB cable plugged in on the upper end of the PCB, and the battery is connected by a plug on the closer right end.

A screenshot of the Meshtastic Android application UI, showing the power metrics from the board. Channel 1 (battery) displays 3.98 volts and 88 milliamps. Channel 2 (solar MPPT/DC input) displays 0.7 volts and 0 milliamps, as it's disconnected. Channel 3 (USB input) displays 5.26 volts and -118mA. It's negative because it's charging, not discharging.

030

dj505 @5panel.dance · 22/12/2025

Almost there... 👀

A photo of the front side of a printed circuit board, unfinished, roughly half populated with components.

A photo of the back side of the same PCB. There are plenty of decorative details present, including stylized text showing the name of the board (Meshlet) and the hardware revision (version 0.1). There's also a QR code leading to the project page, and a few blocks of text listing battery warnings and describing functionality for several jumpers on the front side.

010

Reposted by dj505

Eric Migicovsky @ericmigi.com · 04/11/2025

I'm pleased to share the schematic AND Kicad project for Pebble 2 Duo - useful if you are have fun hacking! github.com/coredevices/...

614921

dj505 @5panel.dance · 18/10/2025

We have some games at work with bad steering potentiometeers. The old ones are discontinued, and the output range on the new model is backwards, which means the steering is also backwards. Turns out, they're not real potentiometers. They're hall effect sensors in disguise. How do you fix this...?

Two potentiometers from a Raw Thrills "Snowboarder" game. The one on the left is new. The one on the right is also new, but has been cracked open, and the parts are laying on the table. There's a small circuit board with a magnet sensing chip, a green insulating plastic piece, and a magnet.

110

Reposted by dj505

Alice Averlong 🏳️‍⚧️ @alice.averlong.com · 15/10/2025

I've been bedridden for the last 10 months for medical reasons, and I'm still about 1000$ behind on being able to pay for my car and storage. I'm sorry to keep asking, but if you could send a couple dollars, it'd really help. ko-fi.com/fooneturing

ko-fi.com

Support Foone Turing ❤️

Become a supporter of Foone Turing today!

4353371

dj505 @5panel.dance · 30/09/2025

I posted a lil teaser about this PCB last month but didn't really elaborate! This is the "Meshlet," a LoRa node I designed around the RP2350 that supports some super neat features. It's meant for use with #meshtastic, hence the logo and stuff, but it can be pretty versatile. Features include...

A screenshot of a 3D render of the top side of a circuit board. This board has a black base, with white silkscreen text, and yellow-gold pads. It's very densely packed with components.

381

dj505 @5panel.dance · 21/09/2025

happy 21st night of September to those who celebrate

000

Reposted by dj505

Eric Migicovsky @ericmigi.com · 08/09/2025

The first 400 finished production Pebble 2 Duos were packaged up today! Their next stop in a few days is our fulfillment center and then shipped to you! Full update on the blog: ericmigi.com/blog/pebble-... Thank you very much to our manufacturing partners at @seeedstudio.com and Foxconn!

ericmigi.com

Pebble 2 Duo is in mass production!

1021924

Reposted by dj505

Alice Averlong 🏳️‍⚧️ @alice.averlong.com · 28/08/2025

I've been bedridden for the last 6 months, unable to work as I try to get a surgeon and insurance lined up for my operation to let me work again. If you could send a couple dollars, it'd really help. Time isn't on my side here, and waiting is very expensive. ko-fi.com/fooneturing

ko-fi.com

Support Foone Turing ❤️

Become a supporter of Foone Turing today!

2186163

Reposted by dj505

ゆうたONE / YutaONEfont™︎ @yutaone.bsky.social · 20/08/2025

🚨Look at this! A new YutaONEfont™︎ has been created. We will launch when the number of reposts reaches 2000. Please spread the word!

0220210

dj505 @5panel.dance · 14/08/2025

Pebble Time 2 announcement dropped today and my Pebble Time Round decided its job here was done

A photo of a Pebble Time Round smartwatch sitting on a white table. The watch body is slightly open, separated in half.

A photo of the battery inside of the Pebble Time Round watch. The battery is noticeably inflated and looks kind of like an overstuffed pillow. This is very dangerous and an active fire hazard. Rip

030

Reposted by dj505

Eric Migicovsky @ericmigi.com · 13/08/2025

We're really proud to show off the final design for Pebble Time 2*! It's quite a bit sleeker and imo more awesome looking than the original design for Core Time 2 we showed off in March. I hope you like it!