iiinova — where your digital self keeps evolving

Reposted by just extrude, my dudes 🖖

Ben Hart @pavlovforgoths.com · 11/09/2023

Huh, that's a weird tomato. 🍅🌱 #anime #manga paint by @lykios.bsky.social

0197

Reposted by just extrude, my dudes 🖖

A-Noob-Bus @a-noob-bus.bsky.social · 11/09/2023

I needed a new spark to keep me meshing so I got a 3d printer. Here's a design I made myself

041

Reposted by just extrude, my dudes 🖖

Alex Snow (He/Him/His) @snowentific.bsky.social · 11/09/2023

I definitely prime the resin! Have to wait for it to 100% cure too or the paint won't stick.

011

Reposted by just extrude, my dudes 🖖

Alex Snow (He/Him/His) @snowentific.bsky.social · 11/09/2023

Yeah the stuff isn't easy for sure. For prints I'm going to sand a bunch anyway like the stands I print with a 1mm nozzle. Otherwise I have to switch to my direct drive toolhead since it has a better extruder.

111

just extrude, my dudes 🖖 @3dprints.bsky.social · 11/09/2023

we've been using spray primer and bottom-shelf acrylic paints

110

Reposted by just extrude, my dudes 🖖

Rainbow Corn @rainbowcorn.bsky.social · 11/09/2023

3D resin printing community what the hell kind of paint so y'all use on your prints because I feel like this should be easy to find out but it's not

211

just extrude, my dudes 🖖 @3dprints.bsky.social · 11/09/2023

it's going to be the first thing they make after a benchy

000

just extrude, my dudes 🖖 @3dprints.bsky.social · 11/09/2023

This isn't an STL but it's listed as one. It's an origami papercraft sculpture I found on Etsy. www.etsy.com/listing/8227...

000

just extrude, my dudes 🖖 @3dprints.bsky.social · 11/09/2023

there's a significant print error due to a pause but everything else is up to snuff

000

just extrude, my dudes 🖖 @3dprints.bsky.social · 11/09/2023

I only used (a different) wood filament once and it was so difficult to use! Your stands came out great. Did you have to prime the resin before you painted?

110

Reposted by just extrude, my dudes 🖖

ɯᴉpɹɐɾ ɯᴉʇ 🇿🇦 @timmehjimmeh.bsky.social · 10/09/2023

I imagine a clear UV resin for printing would work! I know I've seen more traditional craft UV resin used in this situation by Warhammer YouTubers. But this was made with two part craft resin tinted with mica powder. I asked local dice makers what their go to brand was and got the same!

011

Reposted by just extrude, my dudes 🖖

IndaneTrash/BunnyPrints @indanetrash.bsky.social · 08/09/2023

Couldn't leave you livestock animals out; ear tags now available! ❤️ (Can be printed with the ear clip or a loop for a carabiner!) #3DPrinting #openforcommissions

021

Reposted by just extrude, my dudes 🖖

Ed @ed3d.net · 10/09/2023

The best use case I have for #3dprinting is the dumb little spacers, etc. you print because you need to solve a problem right then and there. Like this stupid gigantic GPU not having the right size offset for the case, so I just printed a screw and a nut and 3M-taped it in place under compression.

021

Reposted by just extrude, my dudes 🖖

Phil 📸 Photography 💡Creative 🌆 Cologne @philwil.bsky.social · 10/09/2023

My favorite 3D-Print: a SD-Card holder that can organize all my SD-Cards with current projects. In case anyone wants to reprint this: 👇 www.thingiverse.com/thing:56074

A 3D-Printed SD-Card Holder with several SD-Cards

141

just extrude, my dudes 🖖 @3dprints.bsky.social · 10/09/2023

I'm actually really curious about the answer to this myself.

000

Reposted by just extrude, my dudes 🖖

Ralph MacSavage @ralphmacsavage.bsky.social · 10/09/2023

Got this beautiful model off the interwebs, only for my cat to pull it of the counter & shatter the back a few hours later... Would anyone happen to know if Resin 3D printing has a mix that would be stable and strong enough to act as a replacement plate for something strewed into place?

111

just extrude, my dudes 🖖 @3dprints.bsky.social · 10/09/2023

is this normal resin used for 3D printing? how did you paint it?

110

Reposted by just extrude, my dudes 🖖

ɯᴉpɹɐɾ ɯᴉʇ 🇿🇦 @timmehjimmeh.bsky.social · 03/08/2023

I finished this quickish project today (deadlines are a real motivator to me and this is a gift 😅) Traced a stock photo in #Procreate, set up for #3Dprinting in #Blender, printed in FDM and filled in with resin, tinted with mica powder for ✨sparkle✨ Inspired by Peter Brown on YouTube!

172

just extrude, my dudes 🖖 @3dprints.bsky.social · 10/09/2023

This looks so cool! Can't wait to try this with my model.

110

Reposted by just extrude, my dudes 🖖

ɯᴉpɹɐɾ ɯᴉʇ 🇿🇦 @timmehjimmeh.bsky.social · 08/08/2023

Okay last one for reals. A 3D model I printed out of the aforementioned Basteln, the kobold artificer. Modelled in Blender and printed on my Creality resin machine, with the base on FDM. #3Dprinting #dnd

3D orthographic views of Bastlen the Kobold as a 3D model in Blender

The printed and painted model, featuring a 28mm scale version for tabletop play!

131

just extrude, my dudes 🖖 @3dprints.bsky.social · 10/09/2023

how do the lids close? do they use magnets?

100

Reposted by just extrude, my dudes 🖖

FrozenFOXX @frozenfoxx.cultoffoxx.net · 07/09/2023

Made some trash bins for our desks. They’re simple and I like how they worked out. #3dprinting

261

just extrude, my dudes 🖖 @3dprints.bsky.social · 10/09/2023

These are cool! Would love to know what filament you used to achieve these colors.

110

Reposted by just extrude, my dudes 🖖

Alex Snow (He/Him/His) @snowentific.bsky.social · 07/09/2023

My latest #3Dprinting adventure! Two months in the making, the client wanted to show the idea of protein-protein interactions. Both these structures can be taken apart and put back together! #3Dprint #sciart #scicomm #PDBart

A 3D print of the met requestor complex (surface view). The protein subunits are in blue and purple and the DNA is in orange. The complex is on a decorative stand with a black stalk and wood base, with a silver sign saying "met repressor complex PDB 1MJ2".

A 3D print of the auxin response factor 1. The protein subunits are painted in an orange-yellow gradient, and the DNA is painted blue. The protein is laid on a wood background.

A 3D print of the auxin response factor 1. The protein subunits are painted in an orange-yellow gradient, and the DNA is painted blue. The protein is split into the subunits on a wood background.

181

Reposted by just extrude, my dudes 🖖

Coda @coda.horse · 08/09/2023

To the 3D printer-ers here, I'm looking for a faster and more reliable replacement for my CR-6 SE over the next few months for printing simple-ish tools and trinkets. Do I go Bambu Lab P1S/P—unless the X1C is worth the upgrade, or go Prusa MK4? I'm open to recommendations! #3dprinting

161

just extrude, my dudes 🖖 @3dprints.bsky.social · 10/09/2023

would genuinely enjoy seeing someone try this 👀

000

just extrude, my dudes 🖖 @3dprints.bsky.social · 10/09/2023

Absolutely phenomenal 3D printed bust of Sylvanas by r/Iceey. #3DPrint #3DPrinting

061