iiinova — where your digital self keeps evolving

Fox Crafting Studio @foxcraftingstudio.bsky.social · 1h

A bowl made of maple, using some dye, and some fire. #woodworking #woodturning

Fox Crafting Studio @foxcraftingstudio.bsky.social · 27/09/2026

The woodturning workshop has finished, and I barely finished turning the outside of this vase. I am not really happy about the shape, maybe I will continue working on it someday... #woodworking #woodturning

060

Fox Crafting Studio @foxcraftingstudio.bsky.social · 25/09/2026

The piece of ash shows such a cool mesmerizing pattern while turning 😎 #woodworking #woodturning

2111

Fox Crafting Studio @foxcraftingstudio.bsky.social · 24/09/2026

I am at a woodturning workshop, and used a bezel for the first time today 😀 #woodworking #woodturning

050

Fox Crafting Studio @foxcraftingstudio.bsky.social · 20/09/2026

Some impressions from the woodturner meeting in Ebbs/Austria. There were so many inspiring things 😎 #woodworking #woodturning

070

Fox Crafting Studio @foxcraftingstudio.bsky.social · 20/09/2026

I am at a woodturner meeting in Ebbs/Austria 😎 dft2026.de #woodworking #woodturning

A large hall where various people do woodturning, showcase their finished pieces, or just want to make money :)

030

Fox Crafting Studio @foxcraftingstudio.bsky.social · 10/09/2026

Pentagon shaped bowl made from dibetou. The shape (especially of the rim) is inspired by a similar bowl which I saw during a recent wood turning event. #woodworking #woodturning

The bowl, which is round in the middle and has five edges on the outside.

060

Fox Crafting Studio @foxcraftingstudio.bsky.social · 01/09/2026

This was a lengthy project: a ship on rough seas. Everything is turned on the lathe, even the sail. The water and the ship are hollowed out, which can both be used as two boxes. Bon voyage! 😊 #woodworking #woodturning

The finished project on a table. The water is dyed on the outside. Everything else is just finished with oil.

The three individual parts of the projects.

070

Fox Crafting Studio @foxcraftingstudio.bsky.social · 25/08/2026

I was working on this piece of maple ... until I found the home of someone 😀 #woodworking #woodturning

After sanding, I noticed a small hole, which was probably caused by a woodworm.

080

Fox Crafting Studio @foxcraftingstudio.bsky.social · 20/08/2026

Coloring some goldfield burl using spirit stain. I used two different types of blue, which led to a rich appearance. #woodworking #woodturning

190

Fox Crafting Studio @foxcraftingstudio.bsky.social · 07/08/2026

It turned out that the faceplate works very nicely for glueing together such lengthy structures. #woodworking #woodturning

Adding glue to the pieces which I saw recently.

To apply pressure, I put them into the faceplate.

Just the upper part needed some additional pressure with clamps.

The glued piece. It just needs a little sanding to clean up the glued joint.

060

Fox Crafting Studio @foxcraftingstudio.bsky.social · 05/08/2026

When you saw one of your bowls, the saying "trust the process" is more important than ever 😊 #woodworking #woodturning

A bowl made from walnut. It is just the beginning 😊

I sanded the surfaces where I sawed previously. Do you see what this will become? To be continued...

050

Reposted by Fox Crafting Studio

The Woodturner’s Wife @thewoodturnerswife.bsky.social · 31/07/2026

I’m delighted to reveal a piece I’ve been working on, on/off, for a couple months Presenting “Tranquility” 🪷 Handmade from sycamore with a walnut, sapele, sycamore & maple Lotus lid, feature a secret oasis of pebbles in a crystal clear resin pond #handmade #woodart #woodturning #SBS #homedecor

0112

Fox Crafting Studio @foxcraftingstudio.bsky.social · 29/07/2026

I colored the lid black after considering the input from multiple people. Now the box somewhat resembles a solar eclipse when looking from top 😎 #woodworking #woodturning

Box in my hands. The base is made from ash, the lid is dyed oak.

Opening the box. The box is finished with hard wax oil.

Close up on the base. It shows some nice reflections in the sun.

Look onto the lid from below. It took me multiple layers of dye before I was satisfied with the color.

2100

Fox Crafting Studio @foxcraftingstudio.bsky.social · 18/07/2026

A box made from ash with an oak lid. Should I dye the lid in black? #woodworking #woodturning

An unfinished box where I am currently considering dyeing the lid in black.

361

Fox Crafting Studio @foxcraftingstudio.bsky.social · 14/07/2026

A little bowl made from lime wood. The blank looked plain, the shape is simple. I quite like this plain, simple bowl 😊 #woodworking #woodturning

Side view. The bowl is finished with walnut oil and carnauba wax.

It is "just" lime wood, but it still has so many features to discover 😊

1141

Fox Crafting Studio @foxcraftingstudio.bsky.social · 06/07/2026

This bowl is made from holm oak. It was the first time I worked with this wood. The patterns on it are very exciting 😎 #woodworking #woodturning

Holding the bowl in my hand. The bowl is finished with walnut oil, polishing paste, and carnauba wax.

060

Fox Crafting Studio @foxcraftingstudio.bsky.social · 23/06/2026

Pre-turning another ash bowl. It is my first attempt at a bowl with such a live edge. I hope that the bark survives the drying process 🤞 #woodworking #woodturning

1100

Fox Crafting Studio @foxcraftingstudio.bsky.social · 10/06/2026

One of multiple ash bowls, which I pre-turned before drying. This wet wood really gives lovely shavings 😊 #woodworking #woodturning

071

Fox Crafting Studio @foxcraftingstudio.bsky.social · 01/06/2026

A little bowl made from some nice spalted birch. What do you think? #woodworking #woodturning

Top view into the bowl. Around a year ago, I tried to turn spalted beech. Back then, the surface didn't come out nicely due to bad technique, and I had to sand a lot. This one with spalted birch worked much better. Though, I may again do a similar project with spalted wood in around one year to further monitor my technique 😅

Side view. Since it is made from birch, the entire bowl feels quite light.

Another side view. Spalted wood is so multifaceted 😎

1130

Fox Crafting Studio @foxcraftingstudio.bsky.social · 21/05/2026

A little bowl made from maple. I used a lovely three-component finish, which made it VERY shiny 🤩 #woodworking #woodturning

180

Fox Crafting Studio @foxcraftingstudio.bsky.social · 13/05/2026

A bowl turned from some lovely Swiss pine. Fun fact: the wood is from inside the bread box, which I showed in my last post 😎 #woodworking #woodturning

The bottom of the bowl. I did not apply a finish to preserve the characteristic smell of Swiss pine.

080

Fox Crafting Studio @foxcraftingstudio.bsky.social · 05/05/2026

I made this bread bin during a recent woodturning course, where I had access to a larger lathe. It is made from Swiss pine. No finish is applied to preserve the characteristic smell. I wish you could smell it 😅 #woodworking #woodturning

Side view showing the bottom of the box.

Open bread bin with some bread inside. The wood changes the smell and taste of the bread quite a bit. Test are ongoing 😄

090

Fox Crafting Studio @foxcraftingstudio.bsky.social · 29/04/2026

New wood has arrived at my personal lumberyard. 😎 #woodworking

080

Fox Crafting Studio @foxcraftingstudio.bsky.social · 23/04/2026

One of the biggest projects so far: cleaning up my workshop 😅 #woodworking #woodturning

3100

Fox Crafting Studio @foxcraftingstudio.bsky.social · 14/04/2026

Finishing and testing a tea light holder, which I turned recently during a wood turning course. The wood is walnut with a rim made from lime. #woodworking #woodturning

A glass thing is used to hold the tea light.

Lighting the tea light. Holes in the piece lead to some interesting patterns on the table.

Side view of the finished piece. This photo is made using a different camera.

2100

Fox Crafting Studio @foxcraftingstudio.bsky.social · 05/04/2026

I was at a woodturning workshop till yesterday ... and it was awesome 😎 #woodworking #woodturning

150

Fox Crafting Studio @foxcraftingstudio.bsky.social · 26/03/2026

The beginning of a very lengthy project. So far, it is just some turning of a piece of walnut. But this piece has a long road ahead 😎 #woodworking #woodturning

160

Fox Crafting Studio @foxcraftingstudio.bsky.social · 06/01/2026

I practiced turning a hollow form. It is made from walnut. The wall got much thinner than I had initially planned, probably around 2 millimeters at the thinnest part. The inner surface is still a bit rough, though, indicating the need for more practice ☺️ #woodworking #woodturning

Hollow form made from walnut. It is finished with walnut oil, polished, and waxed using carnauba wax.

Side view. I choose the orientation of the wood such that the bright part is on top.

1120

Fox Crafting Studio @foxcraftingstudio.bsky.social · 30/12/2025

A lidded box with a handle inspired by the Starfleet logo from Star Trek 💫 May the upcoming year 2026 be a successful year in your long and prosperous life! 🖖 #woodworking #woodturning

Lidded box made out of walnut with a handle made out of maple.

090

Fox Crafting Studio @foxcraftingstudio.bsky.social · 25/12/2025

I wish you a festive season and a Merry Christmas! 🎄 Here are three snowmen I turned to join Richard Findley's festive turning challenge. #woodworking #woodturning

Wooden snowmen, made from ash, maple, and pear (from left to right). The noses are made from padauk, the hat is dyed.

0101

Fox Crafting Studio @foxcraftingstudio.bsky.social · 09/12/2025

Finally finished turning the wenge piece. Just the lid is still missing ... to be continued 😎 #woodworking #woodturning

A bowl with an integrated box. The wood is wenge. It is finished with walnut oil and wax.

0181

Fox Crafting Studio @foxcraftingstudio.bsky.social · 02/12/2025

Oiling wood is always interesting, but the effect on this piece of wenge was truly amazing. #woodworking #woodturning

Bottom site of a bowl made from wenge before oiling.

Bottom site of a bowl made from wenge after oiling. I used walnut oil.

2181

Fox Crafting Studio @foxcraftingstudio.bsky.social · 17/11/2025

This year's birthday presents were epic: some exciting wood blanks and a lovely handmade logo made from leather 😎 #woodworking #leather

060

Fox Crafting Studio @foxcraftingstudio.bsky.social · 03/11/2025

I made my first vase from some lovely yew with a glass insert. 😎 #woodworking #woodturning

Putting a glass insert into a vase made from yew.

Yew is such a lovely wood. I finished it with walnut oil and wax.

0100

Fox Crafting Studio @foxcraftingstudio.bsky.social · 16/10/2025

The screw which fixes the indexing gear of my lathe became loose over time and disappeared somehow. I ordered a new screw. It was an interesting opportunity to learn about the inner parts of my lathe 😎 #woodturning

Inside of my lathe, where a screw is missing. This screw was supposed to fix the indexing gear.

Inside of the lathe after adding a replacement screw.

060

Fox Crafting Studio @foxcraftingstudio.bsky.social · 11/10/2025

I was in a garden center today ... it turned out that the shape of the flowerpots can be quite intriguing for my inner woodturner 😁

010

Fox Crafting Studio @foxcraftingstudio.bsky.social · 08/10/2025

A small plate made from some lovely maple and with a rim colored using acrylic paint 😎 #woodworking #woodturning

090