iiinova — where your digital self keeps evolving

There are a few popular mini-standards today, like Wemos D1 mini, "supermini", and T-Display, but it also doesn't matter that they're fragmented because DIP-style breakouts don't need standardization to be valuable - they're smaller, can offer more IO (or less!), and are more breadboard friendly.

000

Maybe I'm an outlier but I never really understood shields even back when I was using a Diecimila as my main dev board - too many caveats around pin conflicts when stacking them, and rarely was 1 shield enough, so you're going to be using a breadboard anyway.

100

It's 2025, why are we still making dev boards with an Arduino footprint?!

190

scottbez1 @scottbez1.bsky.social · 30/09/2025

I think that community can persist independently, and arguably already has since ESP32 launched and Arduino hardware is much less popular. Does anyone actually use any Arduino hardware newer than Uno R3? If anything, Adafruit has had the bigger role in community and education for hobbyists lately.

060

They're called P125-E2, found on AliExpress. I needed the bigger heads for some of the large through-holes. So far I like these large 2mm diameter pins LOT better than the smaller ones I've used before. They just gently press-fit into the 3d printed jig so they're super easy to replace if needed.

000

scottbez1 @scottbez1.bsky.social · 28/09/2025

Bed of nails programming jig and tester coming along nicely. No actual programming or testing implemented yet, but the presence switch and LEDs are working 😀 The linear toggle clamp is so much better than the cheaper pivoting toggle clamps I've used before.

3251

scottbez1 @scottbez1.bsky.social · 21/09/2025

Chainable I2C drivers for them - based on ATTiny 1-series MCU. Should be launching these soon, but happy to share the designs early if you're interested!

110

scottbez1 @scottbez1.bsky.social · 21/09/2025

Is that the 60mm soundwell motor fader? 👀 I have a new open source project/product coming soon that might be up your alley...

100

scottbez1 @scottbez1.bsky.social · 06/09/2025

Bed of nails for an upcoming product... Loving these extra large pogo pins.

160

Reposted by scottbez1

Matt Keeter @mattkeeter.com · 01/09/2025

life pro tip: you can get free LLM API access by finding people crashing out in Claude Code issues, then looking at network requests from their vibe-coded websites!

Screenshot of a Github bug report, whose important contents are the following:

just read it, its dangerous its need to be stop!!!! you destroy my 4 month project, and evrything is fake! its not real!!QQ!!!!QQQ its a fraud!!!!

Screenshot of a website calling itself "Magic Studio: Your creative space for generating AI-powered sets and finding the perfect track matches"

network request with a payload that begins with "You are a professional DJ creating a unique 5-song playlist...."

POST request to generativelanguage.googleapis.com which includes an API key. The text of the key is pixelated.

212315

Reposted by scottbez1

Seanie Byrne 🦡 @seaniebyrne.bsky.social · 31/08/2025

Moments after the collision snapshot was uploaded to Tesla's servers, the local copy on the car was marked for deletion. Then, "someone at Tesla probably took 'affirmative action to delete' the copy of the data on the company’s central database" arstechnica.com/cars/2025/08...

arstechnica.com

Tesla denied having fatal crash data until a hacker found it

The data was key evidence in the death of a pedestrian in 2019.

031

scottbez1 @scottbez1.bsky.social · 24/08/2025

This and fuzzy skin need an "outer convex hull" option, as that's often the behavior you want

020

IC swapped and we've got blinks! Ignore the slightly melted JST connector...

1110

Yeah it's definitely limiting if you're using anything remotely off the beaten path. For my relatively simple designs it's been nice.

100

(Disclosure: I've been sponsored by JLC in the past, though I was already using JLC regularly at that point)

100

scottbez1 @scottbez1.bsky.social · 15/08/2025

JLC. I've had mixed quality on some things (mostly an extremely high rate of LED failures), but I can't get away from their part library. It's such a massive competitive advantage since it also means they can provide instant renders of placement/orientation, and stock/pricing is straightforward.

110

Oops, just realized I had the fab populate the wrong MCU on an initial small run of PCBAs for a new product... Same pinout, but half the flash and missing a peripheral I needed 🙃 I foresee hot air or a hot plate in my future...

160

Reposted by scottbez1

Freya Holmér @freya.bsky.social · 13/08/2025

as we all know every programmer's dream job is to never have to code again and instead just manage PRs with unreliable code and communicate with the unreliable entities who wrote it

428316

scottbez1 @scottbez1.bsky.social · 12/08/2025

🤦‍♂️ it was my soldering or my breadboard, causing voltage drop on the supply

180

scottbez1 @scottbez1.bsky.social · 10/08/2025

Finally restocking some inventory for the Bezek Labs store. $111 import duties on $88 worth of goods. Yup, no choice but to raise prices at this point... 😕

1101

scottbez1 @scottbez1.bsky.social · 10/08/2025

Yellow line does not look like what you want to see on a CC boost output with a static load... 2v fluctuations at ~160Hz. This is on the Adafruit TPS61169 CC LED boost breakout board - more details on my issue here: forums.adafruit.com/viewtopic.ph... I'm a boost converter noob - any ideas?

010

scottbez1 @scottbez1.bsky.social · 10/08/2025

Ok this AI hype is out of hand. This is for a Qi charger 🤦‍♂️

260

scottbez1 @scottbez1.bsky.social · 01/08/2025

😲 woah this is INSANE!!!!!!!

020

It's a little too wobbly right now, so I probably need to add a 3rd wire inside for support

030

Successfully modified my Ikea Tvärhand lamp to use a custom 24V "knot" filament bulb, with ESPHome integration. Next up is modifying the base to add a dimmer knob of some sort...

1211

Adafruit TPS61169 Constant Current Boost Converter for LEDs

Adafruit's new TPS61169 board www.adafruit.com/product/6354 is literally perfect for a project I'm working on, but I hesitated ordering while I looked for other things to add to my cart and now they're sold out 😭. Not available from distributors like mouser or digikey either 😥

adafruit.com

The Adafruit Constant Current Boost Converter for LEDs makes driving LEDs easy, whether they're in series or parallel - with a chip that can generate up to 40V and 400mA from 3~5V ...

050

It seems like maybe there's optiboot support for ATtiny 1, but I believe that's serial-based? Anything off the shelf for I2C on ATtiny 1 or will I have to learn how to write my own bootloader?

100