iiinova — where your digital self keeps evolving

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 22/07/2026

Heck yeah, I finished molding and resin cast some opaque white and transparent red arrow inserts for my eightball pinball playfield restorations. I've done this before, but I'm still shocked. The opaque red is the original, the rest are repro

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 21/07/2026

I need opaque white and transparent red pinball arrow inserts for my eightball playfield restorations. Apparently no one reproduces them, so I'm using the opaque red arrows I accidentally bought to make a mold to reproduce what I need.

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 02/07/2026

I'm so sick of looking at it, but it turned out great. In a few weeks, I'm going to do two at the same time to see how the process goes. Should be quicker, and even more accurate with a couple of tweaks. #pinball #bally #restoration

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 30/06/2026

Finally got the last layer on this thing. I need to clear it tomorrow, do a few touch ups, clear it and buff it, and it'll be done. #bally #pinball #restoration

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 28/06/2026

Super excited that I'm on the last color (black) tomorrow. I'm screen printing Bally eightball pinball playfields, and it's been in the works for months.

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 26/06/2026

Still going! Just added the yellow layer today, and might go for blue and maroon too. Less flashy today, but if I do blue and maroon, I'll have 5/7 screens done #pinball #eightball

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 25/06/2026

Finally screen printing my first Bally eightball pinball playfield. White and green look great!

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 20/06/2026

I flattened everything out after clear coating one final time, and there were no shiny spots left (which means it's flat). Now I can finally start screen printing this Bally eightball playfield

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 18/06/2026

Hopefully the final clear and flatten before screen printing my first Bally eightball pinball playfield re-screen.

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 12/06/2026

I'm thrilled these repro eightball pinball arch/aprons turned out perfect. Now I need to powder coat and screen print them.

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 08/06/2026

Almost ready to screen print these eightball pinball pf's. I've got the jig and frame set up, which is one of the hardest parts. I'm going to match the black screen first, screen print the alignment markers, then go back to the first color and align it with the markers. I'm making a few aprons too.

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 24/05/2026

Finally burned all of the screens for my eightball pinball playfield re-screen project.

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 22/05/2026

Terminator 2 pinball apron. The one on top is the original, and the bottom is the repro. So damned close, I think I'm gonna roll with it

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 19/05/2026

Doing a terminator 2 pinball apron. Overall, looks good, but I'm gonna tweak the darker blue a little to make it pwrfect

030

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 11/05/2026

Hopefully I'll have these custom screens burned in the next week or so. I'm re-screen printing Bally eightball pinball playfields. This is for 1 of 7 colors. No idea where I'm gonna store these

031

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 26/03/2026

Pretty happy with all of the pinball aprons I've done lately. Just finished funhouse today. I still have several others not pictured here

021

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 16/03/2026

This is cool. I put a transparency for the black on my cleaned up Bally Eightball pinball playfield to make sure my vector images lined up correctly before making screens. I'm going to clear, re-screen print, then clear again - old eightball playfields for 650 shipped (exchange required)

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 06/03/2026

All finished with a couple of new pinball apron designs. Diner and dragonfist. I felt like I was so far behind before this week, glad to catch up a little. Funhouse and whirlwind up next

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 05/03/2026

Happy to say that I can now do classic stern pinball aprons now too. This one is for an ultra rare dragonfist.

110

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 03/03/2026

I finished screening the first williams diner pinball apron and shooter cover this morning. I love how it turned out

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 28/02/2026

I just tested out my screens, and screen printed a diner pinball apron. Pretty happy with the results!

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 26/02/2026

I've already completely vectorized the eightball pinball playfield, but it wasn't aligned correctly, so I did it again from scratch. I printed it on a transparency, and it fits perfectly this time. I'm experimenting with an eightball in my shed to create screens necessary to re-screen the playfield

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 19/02/2026

Printing some transparencies to make some screens tomorrow, so I can screen print some other pinball aprons. I don't think this part ever gets old, just looks so cool

030

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 03/01/2026

Finally finished the paint job on my Gottlieb reactor arcade cabinet. Took forever, but it's what I was shooting for

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 26/11/2025

Finally finished the backbox for the black knight pinball. Definitely ran into some stuff along the way, buy happy to be at the end

030

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 21/11/2025

This is about as glossy as I can get the orange on my Gottlieb reactor arcade cabinet. My ultimate goal is "ark of the covenant" reaction when looking at it

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 15/10/2025

Finally getting around to my Gottlieb reactor. This thing is pretty much going to be 90% repro stuff, but it's the best I could do considering I've never seen one in person 😂

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 03/10/2025

False alarm last time I said the Budweiser tapper was done. I put in a new monitor, and sent the board off to fix the sound again.

110

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 12/09/2025

Crazy. I got an Atari marble madness for an insane deal. It wasn't booting, but I tried the ol' press on the chips to dislodge corrosion, and it freaking works!

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 10/09/2025

Finished the bottom of the Williams black knight pinball I've been re stenciling for a while after clearing and sanding a third time, then buffing.

140

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 01/09/2025

Ive been working on this black knight pinball for a while. I decided to buff one side to see how it was going, and decided to clear it one more time to leave a little space between the artwork and top of the clear.

010

Reposted by Mneubey (Arcadestencils.com)

Robert the Battletoad @robertbattletoad.bsky.social · 24/08/2025

“Your father did that too!”

063

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 13/08/2025

Just started watching Alien Earth, and holy moly! I literally had to double check to make sure I wasn't actually watching the first movie. Beautiful job

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 28/07/2025

Holy hell! After I stopped working on this Gottlieb Haunted House about a year ago because I couldn't figure it out. I spent about 5 min to fix each of the issues within the last 24 hours.

040

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 31/05/2025

I haven't really been in the mood to clean this up (power brick from tapper arcade), so I'm glad it's over. Almost ready to put everything back together

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 02/05/2025

New bezels for tapper and Mario Bros arcade from Phoenix arcade. Just incredible stuff as always

021

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 28/04/2025

Just finished applying the sideart to my Budweiser tapper. Love the look

020

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 25/04/2025

Starting to stencil the black knight pinball. We are going with colors that are metallic and quite a bit more bold than the original, just because.

051

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 21/04/2025

Finishing up the base coat for this Williams black knight pinball before stenciling it

110

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 05/04/2025

Piece by piece, I've been restoring my junky Nintendo Mario Bros arcade game. Glad I recently had a tetanus shot

141

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 28/03/2025

Repainted the tapper arcade machine today after flattening it. Will sand it flat one more time before applying decals. Also realized that if I add an extra piece to my powder coating order, I typically don't get charged for it, so my Mario Bros is getting redone piece by piece 😂.

000

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 21/03/2025

Finally got my hvlp setup back in action. I started with a base coat for my tapper that'll be sanded flat before putting on the decals. My Gottlieb Reactor is next, now that I've taken the first (and hardest step).

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 14/03/2025

Just got my hardware back from being re-brassed for my tapper arcade machine.

110

Reposted by Mneubey (Arcadestencils.com)

Altan @aaarpinball.com · 02/03/2025

My goal is only to post about Pinball. But this drove by.

4101

Reposted by Mneubey (Arcadestencils.com)

Altan @aaarpinball.com · 04/03/2025

Looking pretty sharp. Pinballs Machines.

Several pinball machines including Uncanny X Men, James Bond, Fun House, Road Show, Scared Stiff, White Water

Several pinball machines including Uncanny X-Men, Twilight Zone, Jurassic Park, Ripley's Believe It or Not!, Terminator 2, Dialed In!, Guns N Roses, Godfather

3542

Reposted by Mneubey (Arcadestencils.com)

jgeorge @jgeorge44.bsky.social · 28/02/2025

If you’re still a T___p supporter after today’s TV debacle, I don’t want to know you exist. Block me on every platform and never contact me again. Or tell me you still support him so I can do the same.

111

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 28/02/2025

So pleased with myself for the week. I finished all of this month's Addams family pinball aprons and shooter gauge restorations, scanned and verified several cabinets, and fulfilled several orders. Now it's maybe time to work on some arcade restorations next week.

010

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 25/02/2025

Always restoring Addams Family pinball aprons. Working on the next run of 6, and almost done.

151

Mneubey (Arcadestencils.com) @mneubey.bsky.social · 25/02/2025

I had a surprisingly productive day today. I verified the sizing of gyruss, finished Qix artwork and sizing to add to arcadestencils.com and also started screen printing 6 more Addams family pinball aprons for people waiting on them. Also helped a buddy fix his pinball machine

010

Reposted by Mneubey (Arcadestencils.com)

Hoodlum 🇺🇸 @nothoodlum.bsky.social · 19/02/2025

“Pay no attention to the man behind the curtain!”

580286688099