iiinova — where your digital self keeps evolving

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 14h

Can #HPLC become greener without losing performance? This study introduces #PropyleneGlycol as a sustainable solvent, enabling rapid separation of #acetaminophen, caffeine and 4-aminophenol with strong reliability. #OpenAccess in #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

Unveiling propylene glycol as a green alternative solvent in reversed-phase HPLC: first report on the rapid assay of acetaminophen–caffeine tablets

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 18h

Can drug testing become greener without sacrificing reliability? This study develops an ethanol–water #HPTLC method for #aceclofenac and #paracetamol, delivering accurate analysis with strong sustainability scores. #OpenAccess in #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

Greenness and whiteness evaluation of HPTLC methodology for simultaneous assay of aceclofenac and paracetamol in fixed-dose combination tablet dosage forms

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 05/10/2026

What determines whether #TiO2 coatings can scale beyond the lab? This review compares wet and #DryDeposition methods, highlighting durability, fouling, cost and environmental challenges for commercial applications. #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre...

Review of recent nano TiO2 film coating methods, assessment techniques, and key problems for scaleup

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 04/10/2026

#Materials discovery is becoming a data challenge. This review shows how #CGCNNs learn directly from crystal structures to predict material properties, accelerating discovery while helping bridge physics-based modelling & #AI-driven design. #NanotechnologyReviews: doi.org/10.1515/ntre...

Deep learning in-depth analysis of crystal graph convolutional neural networks: A new era in materials discovery and its applications

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 04/10/2026

More efficient #SolarCells are key to #RenewableEnergy growth. This review highlights perovskite/CIGS tandem cells, achieving up to 30.1% efficiency while exploring their potential for lower-cost, #SustainableEnergy. #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre... #MaterialsScience

Advancements in perovskite/CIGS tandem solar cells: Material synergies, device configurations, and economic viability for sustainable energy

020

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 03/10/2026

Motion into power. This review shows that rotational #piezoelectric #EnergyHarvesters outperform non-rotating designs, enabling more efficient and continuous conversion of ambient mechanical energy into electricity. #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre...

An in-depth analysis of rotational and non-rotational piezoelectric energy harvesting beams: A comprehensive review

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 03/10/2026

Gold nanomaterials could advance environmental and energy technologies. This review highlights functionalized #GoldNanocrystals and #nanorods for #ContaminantDetection, pollutant removal and improved energy storage. #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre...

Gold nanocrystals and nanorods functionalized with protein and polymeric ligands for environmental, energy storage, and diagnostic applications: A review

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 02/10/2026

How can #WoodPolymerComposites withstand sudden impact without rapid cracking? This study shows #WoodFibers enhance energy absorption and #crackgrowth resistance, with WPE8 showing strong performance under 10 J impact and a 9.20 mm crack length.#DamageTolerance #ePolymers: doi.org/10.1515/epol...

$Study on the fracture toughness of wood fiber reinforced high–density polyethylene composites$

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 02/10/2026

Efficient #CO2conversion needs catalysts that balance activity with durability. This study develops high-entropy alloy/carbon #catalysts achieving >85% CO Faradaic efficiency, with Ag boosting stability and durability in #CO2reduction. #OpenAccess in #ePolymers: doi.org/10.1515/epol...

High entropy alloy implanted nitrogen-doped carbon catalysts synthesized via calcined polyurea for efficient CO2 reduction reaction

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 01/10/2026

Which particles can transfer charge in #electrochemical systems? This study shows that particle conductivity determines electrochemical behavior, with #copper and #graphite actively transporting electrons & boosting process efficiency. #OpenAccess #OpenChemistry: doi.org/10.1515/chem...

Charge transfer behavior of suspended particles under cathodic polarization in aqueous solutions

031

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 01/10/2026

Can green-synthesized #IronOxideNanoparticles tackle bacterial resistance? #RedYeastRice-derived NPs show potent antibacterial activity against S. aureus and E. coli, including #MultiDrugResistant strains, plus antioxidant effects. #NanotechnologyReviews: doi.org/10.1515/ntre...

Green synthesis of iron oxide from red yeast rice.

121

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 30/09/2026

What can an endangered #MedicinalPlant reveal? This study maps Commiphora gileadensis across Saudi Arabia, linking ecology, soil interactions and #phytochemicals to metal phytostabilization and conservation potential. #Stiffness #OpenAccess in #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

Integrative ecological insights and green phytochemical profiling of Commiphora gileadensis L.: a native medicinal resource in Saudi Arabia

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 30/09/2026

How can #SeleniumNanoparticles become more biocompatible for #biomedical use? This review highlights bio-SeNPs from bacteria, algae, fungi and plants, emphasizing their #antioxidant, antimicrobial, #antidiabetic and #anticancer potential. #NanotechnologyReviews: doi.org/10.1515/ntre...

Review on bio-selenium nanoparticles: Synthesis, protocols, and applications in biomedical processes

111

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 29/09/2026

Localized drug delivery could improve how #chemotherapy reaches tumors. This study develops porous PCL/PEG/PLA #scaffolds for #doxorubicin delivery, with polymer composition tuning drug loading and sustained release for up to 720 hours. #OpenAccess in #ePolymers: doi.org/10.1515/epol...

Fabrication of porous PCL/PEG/PLA scaffolds for doxorubicin release

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 29/09/2026

Balancing strength and vibration control is key in #3Dprinted composites. This study found that #talc-reinforced #stereolithography resins increased stiffness & damping but reduced toughness, linking material flow behaviour to vibration performance. #ePolymers: doi.org/10.1515/epol...

Mechanical and vibrational behavior of 3D printed composite reinforced by talc particles

021

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 28/09/2026

Can stronger #adhesives also become easier to evaluate? Magnetite-reinforced #epoxy copolymers improved joint strength, while data-driven indicators accurately predicted mechanical performance, reducing reliance on shear testing. #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

Adhesion performance of magnetite-reinforced epoxy copolymer adhesives evaluated using multi-criteria decision-making methods

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 28/09/2026

#Diabetes can bring both metabolic and #cognitive complications. This study finds that Achillea extracts improve glucose and lipid profiles, reduce oxidative stress and alleviate memory impairment in diabetic rats. #AchilleaMillefolium #OpenAccess #OpenChemistry: doi.org/10.1515/chem...

Anti-diabetic and neuroprotective potential of extracts of Achillea millefolium and Achillea wilhelmsii using in vitro, in vivo and ex vivo pharmacological approaches

021

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 27/09/2026

#Chemicalmixtures can mask toxic effects. Using a human pancreas-like cell model, researchers found most phthalate combinations were less harmful together, but DMP+DBP became more toxic at high doses. #AnimalTesting #PANC1 #Toxicology #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

Toxicity assessment of phthalates and binary mixtures on differentiated three-dimensional pancreatic cell model

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 27/09/2026

Can pharmaceutical analysis be faster and greener? This study develops a QbD-optimized #UPLC method for bisoprolol fumarate, enabling rapid, accurate quantification with reduced solvent use for routine #qualitycontrol. #EcoFriendly #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

The greenness assessment information obtained from the established methodology (UPLC-UV) indicates a value of 0.77 applying AGREE software (A) and a value of 78.0 applying MoGAPI online software (B), reflecting good sustainable development.

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 26/09/2026

#ElectrochemicalSynthesis can simplify metal complex production. This study develops a selective method for #copper chelates using asymmetric alternating current, with potential applications in chelated fertilizers and feed additives. #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

Electrochemical synthesis of copper chelates in non-aqueous media

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 26/09/2026

How can #HeatAndMassTransfer be better controlled in advanced #Magnetohydrodynamic systems? This study shows how magnetic fields, thermal relaxation, curvature and velocity slip can tune #nanofluid flow for advanced #thermalmanagement. #NanotechnologyReviews: doi.org/10.1515/ntre...

Sensitivity analysis of MHD Jeffery hybrid nanofluid flow over an inclined cylinder with Cattaneo–Christov flux model and non-uniform thermal source

011

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 25/09/2026

Faster thermal storage could boost renewable energy efficiency. This study shows optimized fins and Cu/Fe₃O₄-enhanced molten-salt #PhaseChangeMaterials accelerate melting and improve thermal charging. #nanoparticles #Nanomaterials #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre...

A computational analysis of novel-shaped fin designs with nanoparticle-integrated phase change material

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 25/09/2026

How strongly does lithium interact with #2D #nanosheets? This study uses a continuum #LennardJones model to quantify Li adsorption, identifying graphene and h-BN as having the strongest van der Waals interactions. #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre... #MolecularModeling

Analytical modeling of lithium adsorption on two-dimensional nanosheets for energy storage

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 24/09/2026

#AI could make #ProstateCancer drug delivery more precise. This study combines PSMA-targeted, stimuli-responsive #nanocarriers with interpretable machine learning to predict targeting efficiency and optimize treatment performance. #NanotechnologyReviews: doi.org/10.1515/ntre... #CancerTherapy

AI-guided PSMA-targeted stimuli-responsive nanoplatform for precision drug delivery in prostate cancer

021

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 24/09/2026

How can structures resist cascading collapse after local damage? This review explores how #nanomaterials enhance impact resistance and energy dissipation, advancing resilience-based structural design. #ReinforcedConcrete #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre...

Multiscale reinforcement mechanisms and resilience-oriented design of nano-modified cementitious composites for progressive collapse resistance of civil engineering structures

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 23/09/2026

#WearableSensors need conductivity, softness and reliability. This review compares conductive #PolymerComposites for motion and biomechanical sensing, emphasizing task-specific designs, scalable processing and realistic biointerface testing. #ePolymers: doi.org/10.1515/epol... #MaterialsScience

Progress in conductive polymer composites for real-time human motion monitoring and biomechanical sensing

011

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 23/09/2026

How can #CFRP tubes withstand changing torsional loads? Ply orientation and diameter strongly influence performance, with circumferential #fibers raising peak force by 17.2%, while larger tubes resist higher impact energy. #OpenAccess in #ePolymers: doi.org/10.1515/epol... #CompositeDesign

Influence of preparation parameters on the torsion performance and failure mechanisms of CFRP tubes

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 22/09/2026

Rapid detection of toxic aristolochic acid I is vital for safer analysis. A magnetic #Fe3O4 carrier with fluorescent #GoldNanoclusters enables rapid enrichment and detection, with magnetic separation achieved in just 8 seconds. #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

Detection method of Aristolochic acid I based on magnetic carrier Fe3O4 and gold nanoclusters

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 22/09/2026

Can lowering thin-oil #viscosity unlock better recovery from low-permeability reservoirs? A 0.1% viscosity reducer cut viscosity by 92.4%, lowered injection pressure and increased final #OilRecovery to 42.5%. #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

Study on the influence of the viscosity reducer solution on percolation capacity of thin oil in ultra-low permeability reservoir

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 21/09/2026

#IonicLiquids and #DeepEutecticSolvents are reshaping cobalt catalyst design for efficient #WaterSplitting. Their tunability supports heteroatom doping, multifunctional synthesis and enhanced electrocatalytic performance. #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

Innovative synthesis of cobalt-based catalysts using ionic liquids and deep eutectic solvents: A minireview on electrocatalytic water splitting

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 21/09/2026

Delivering #carvacrol while preserving its #bioactivity is challenging. Solvent-free #ChitosanNanoparticles enabled sustained, pH-responsive release with stronger antioxidant and antibacterial activity, offering a green #nanosystem. #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

$Solvent-free ionic gelation of carvacrol-loaded chitosan nanoparticles: fractional factorial optimization and pH-responsive release$

011

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 20/09/2026

Small chemical changes can reshape #graphene’s performance. Controlled oxidation and reduction tune #graphite’s electronic, structural, optical and #dielectric properties, with rGO showing restored conjugation. #OpenAccess in #GreenProcessingandSynthesis: doi.org/10.1515/gps-... #Bioengineering

Graphite, graphene oxide, and reduced graphene oxide: comparative characterization of optical, morphological, structural and electric relaxation properties

011

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 20/09/2026

Can #3Dbioprinting overcome conventional skin graft limitations? This review explores bioinks, multilayer constructs and #AI optimization while addressing vascularization and mechanical stability for customizable #SkinGrafts. #OpenAccess #NanotechnologyReviews: doi.org/10.1515/ntre...

Diagram of the host response to a skin implant: immediate hemostasis/provisional matrix (secs–hrs), inflammation and innate response (hrs–days), adaptive response (days–weeks), then proliferation to fibrous scar or foreign-body reaction (weeks–years), with immune cells and skin layers labeled.

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 19/09/2026

#Biomass-derived #CarbonQuantumDots offer a greener route to fluorescent #nanomaterials. This review explores hydrothermal synthesis, key factors affecting performance, and applications in wastewater treatment and biomedicine. #OpenAccess #NanotechnologyReviews: doi.org/10.1515/ntre...

Hydrothermal synthesis of biomass-derived CQDs: Advances and applications

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 19/09/2026

How can micro/nanomotors become practical #biomedical tools? This review examines advances in propulsion, navigation, targeting and multifunctional design while addressing safety and clinical translation challenges. #Nanorobotic #NanotechnologyReviews: doi.org/10.1515/ntre...

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 18/09/2026

Tuning #MolecularElectronics could enable smarter #nicotinamide design. DFT shows C6 substitution alters orbital energies, polarity and charge distribution, with NO₂ delivering the smallest HOMO–LUMO gap and highest electrophilicity. #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

Electronic structure and substituent effects in C6-Substituted nicotinamide derivatives: a DFT study

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 18/09/2026

Could metal nanoparticles overcome the limitations holding back early #GastricCancer detection? #MetalNanoparticles (MNPs) paired with imaging, biosensors, liquid biopsy and #AI could boost biomarker detection and diagnostic accuracy. #NanotechnologyReviews: doi.org/10.1515/ntre...

Research progress in the application of metal nanoparticles in the early diagnosis of gastric cancer

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 17/09/2026

Roselle #nanocellulose strengthens PVA films with 260% higher tensile strength and 360% higher modulus at 5 wt% loading, improving thermal stability and tunable hygroscopicity for sustainable sensing and #EnergyHarvesting devices. #OpenAccess in #NanotechnologyReviews: doi.org/10.1515/ntre...

Structure-property-performance relationships of roselle nanocellulose reinforced polyvinyl alcohol nanocomposites

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 17/09/2026

Rotating #nanofluids face complex heat-transfer trade-offs. A new model shows #BrownianMotion, thermophoresis and #JouleHeating boost thermal behavior, while stratification reduces it and entropy rises with diffusion and Brinkman numbers. #NanotechnologyReviews: doi.org/10.1515/ntre...

Thermally stratified and dissipated irreversible process impacts on the nonlinear electrically conducted nanomaterial’s: applications to heat transfer optimization

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 16/09/2026

Can one medicinal plant target #diabetes and #hypertension together? This study shows fenugreek leaf extracts lowered blood glucose and blood pressure, while quercetin targeted PPAR-γ and ACE, supporting a multi-target therapeutic approach. #Nanotechnology #OpenChemistry: doi.org/10.1515/chem...

Unlocking the potential of Trigonella foenum-graecum L. plant leaf extracts against diabetes-associated hypertension: A proof of concept by in silico studies

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 16/09/2026

More isn't always better—even with natural compounds. This study shows high-dose #GreenTea #catechins can trigger oxidative stress and liver damage in rats, highlighting the need for safe supplementation. #DoseOptimization #OpenAccess in #OpenChemistry: doi.org/10.1515/chem...

Toxicological effects of green tea catechin extract on rat liver: Delineating safe and harmful doses

000

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 15/09/2026

#Brazil’s biodiversity offers #EssentialOils with anti‑inflammatory and #antimalarial promise; some compounds show stronger predicted binding affinities than artemisinin, with favorable #ADME profiles, underscoring their potential for sustainable #drugdiscovery. Read: doi.org/10.1515/chem...

Essential oils from Brazilian plants: A literature analysis of anti-inflammatory and antimalarial properties and in silico validation

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 15/09/2026

Can #FluorescentPolymers become sensitive metal ion sensors? This study develops amino-terminated HBPSi with stable #AggregationInducedEmission properties and high sensitivity to Fe³⁺, enabling selective fluorescence-based detection. #OpenAccess in #ePolymers: doi.org/10.1515/epol...

Synthesis and Fe3+ response properties of amino-terminated hyperbranched polysiloxane

020

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 14/09/2026

Curcumin's therapeutic potential is limited by poor oral delivery. This study develops ROS-responsive #nanoparticles that protect #curcumin and release it at inflamed sites, offering a promising strategy for #UlcerativeColitis treatment. #OpenAccess #ePolymers: doi.org/10.1515/epol...

Scheme and characterization of selenium‑modified hyaluronic acid nanoparticles loaded with curcumin: synthesis pathway (HA→HA‑Se→curcumin‑loaded HSNPs), NMR/FTIR/XPS spectra confirming conjugation, and size distributions/TEM showing HSNPs ~122 nm and HSNPs@Cur ~192 nm.

020

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 14/09/2026

Can #LightweightComposites improve #stealth without sacrificing strength? This study develops a graded #RPUF composite with GFRP and CFRP layers that delivers broadband microwave absorption across 8–18 GHz with excellent mechanical performance. #ePolymers: doi.org/10.1515/epol...

Schematic diagram of carbon fiber composite structure absorbing material.

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 13/09/2026

Green #nanomedicine needs safer synthesis. Ocimum basilicum juices yield #AgNPs where biomolecular richness drives particle size, stability, and #antimicrobial potency, with leaf‑derived ~8 nm particles showing superior performance. #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

Biomolecular richness controls size-dependent antimicrobial activity of silver nanoparticles synthesized from solvent-free fresh juices of Ocimum basilicum

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 13/09/2026

Sustainable water treatment starts with better adsorbents. \ This study identifies rapeseed #biomass as an effective, low-cost #lignocellulosic material for removing reactive dyes, supporting greener #WastewaterTreatment. #OpenAccess in #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

Assessment of agricultural residues as eco-friendly adsorbents for various organic dyes removal from aqueous solutions

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 12/09/2026

Turn fruit waste into cleaner water. This study uses papaya peel to synthesize Ni-doped CdS #nanoparticles that degrade 96% of ciprofloxacin under visible light, offering a stable & sustainable photocatalyst for #WastewaterTreatment. #GreenProcessingandSynthesis: doi.org/10.1515/gps-...

Papaya peel–assisted synthesis of Ni–CdS nano photocatalysts with enhanced visible-light activity for ciprofloxacin degradation

010

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 12/09/2026

Future energy technologies need multifunctional materials. This study identifies Mg₃CrN₄ as a promising UV-active #semiconductor with strong high-temperature thermoelectric performance for energy conversion and #optoelectronics. # #OpenAccess #NanotechnologyReviews: doi.org/10.1515/ntre...

Advanced quantum mechanical insights into bulk orthorhombic Mg3CrN4 for high-temperature thermoelectric energy conversion and UV optoelectronic applications

011

De Gruyter Brill - Innovations in Molecular & Materials Science @degruyterbrillimms.bsky.social · 11/09/2026

See how #AI improves complex fluid modeling. This study combines ANN-LMBPA with numerical simulations to predict MHD Williamson-Casson #nanofluid flow, enabling better optimization of heat transfer and industrial cooling systems. #FluidDynamics #NanotechnologyReviews: doi.org/10.1515/ntre...

AI-based predictive modeling of unsteady Williamson-Casson nanofluid flow with Cattaneo-Christov heat flux driven by slippery curved stretching sheet subject to magnetic dipole

010