iiinova — where your digital self keeps evolving

Cory Rhoades @coryrhoades.bsky.social · 09/07/2026

5 megapixel 1.2mm focal length covert cameras. Very cool

Cory Rhoades @coryrhoades.bsky.social · 19/06/2026

My trolling motor caught someone's left behind fishing line as I got in the water last weekend. The symptom was slightly slower speed and the cable melting near the battery. Completely invisible until I took the blade off. At least it was an easy fix.

000

Cory Rhoades @coryrhoades.bsky.social · 25/05/2026

I used to say "It's photoshopped, for sure. I can tell by the pixels, and having seen many photoshops in my day." It's been revised to "It's AI, for sure. I can tell by the pixels, and having seen many AI's in my day."

000

Cory Rhoades @coryrhoades.bsky.social · 20/05/2026

Using 3d printed poker chips with laser engravings as a giveaway / business card has been a decent success so far.

030

Cory Rhoades @coryrhoades.bsky.social · 16/05/2026

Booth was supposed to have some more room but that's ok. Dragons seem to always be what sells at local shows. But I get to show off my own creations too. Hamvention 2026

010

Cory Rhoades @coryrhoades.bsky.social · 08/05/2026

I need to find a good fastener for attaching curved dog collar tags to collars. Have someone who wants an engraved one that can't get hooked to fences (hunting dog). Maybe small rivets?

000

Cory Rhoades @coryrhoades.bsky.social · 07/05/2026

I think I need more printers. I KNOW I need to do some plastic cleanup 😂

000

Cory Rhoades @coryrhoades.bsky.social · 07/05/2026

Something I'm working on. Takes a DeWalt power tool battery and steps it down to 12v 5a leads. Just about finalized the design. Way way way too many test prints 😅

010

Cory Rhoades @coryrhoades.bsky.social · 21/04/2026

I am the crystal cinderwing dragon slayer! Printing inventory for upcoming shows.

030

Cory Rhoades @coryrhoades.bsky.social · 19/04/2026

Another custom hat in the books! Laser-engraved patch on a black Flexfit. It's always a fun process seeing these come together for small businesses.

000

Cory Rhoades @coryrhoades.bsky.social · 17/04/2026

Working with a new leatherette material for hat patches. Haven't heat pressed it on yet but I think it looks pretty good.

000

Cory Rhoades @coryrhoades.bsky.social · 14/04/2026

I am going to get one of the small booths at the Dayton Hamvention next month. Usually at Amateur radio festivals I have some 3d prints with me, but primarily focus on my live onsite engraving with my xtool f1. This year I think I'll have a small selection that you can order for engraving only.

110

Cory Rhoades @coryrhoades.bsky.social · 14/04/2026

I was curious how much bigger of a crystal dragon I could print on the H2S vs my old P1S. Am not disappointed, over 3 feet!

000

Cory Rhoades @coryrhoades.bsky.social · 13/04/2026

This cracked me up. A part I designed (carb air filter adapter) got banned from this one track. They made some funny claims about the performance. On 4 dynos and 7 motors it always added 10-13 horsepower. The day after this ban, we sold more than any prior day.

010

Cory Rhoades @coryrhoades.bsky.social · 13/04/2026

Laser engraving some hat patches too

010

Cory Rhoades @coryrhoades.bsky.social · 13/04/2026

Today we're making wall mounts for crown vic shocks.

100

Cory Rhoades @coryrhoades.bsky.social · 12/04/2026

Another recent project I've wrapped up - Helmet dryer with scene tray.

110

Cory Rhoades @coryrhoades.bsky.social · 12/04/2026

I recently revised a design for a storage container to instead work as a storage solution for gears. 5 sets per box, and since it's based on a standard grid they're stackable. Turned out pretty good, if I do say so myself.

000

Cory Rhoades @coryrhoades.bsky.social · 08/12/2025

Been printing a good while now but I still love the articulating dragons, cliche as that may be.

000

Cory Rhoades @coryrhoades.bsky.social · 25/11/2025

@ubermeisters.bsky.social It's pretty cool seeing something you designed in the wild.

130

Cory Rhoades @coryrhoades.bsky.social · 21/11/2025

Went to new york city this week, had a pretty decent view from the hotel room. Good times.

010

Cory Rhoades @coryrhoades.bsky.social · 05/11/2025

Nevermind the mess. Made this template for my xtool f1 slide so I can engrave 7 metal business cards at a time, which is nice. Just some simple tabs to hold it together, since it's longer than what I can print.

000

Cory Rhoades @coryrhoades.bsky.social · 01/11/2025

Random silverware holder for split sink. Didn't like the ones on makerworld, because knives would fall through the slits. Made the circles 5mm so chop sticks also wouldn't fall through.

010

Cory Rhoades @coryrhoades.bsky.social · 16/08/2025

3d printed lure caught some large mouth bass today.

160

Cory Rhoades @coryrhoades.bsky.social · 07/08/2025

v1 of my lure epoxy drying station

010

Cory Rhoades @coryrhoades.bsky.social · 31/07/2025

Looking forward to testing this guy out this weekend. Making some other fun petg filament versions too

020

Cory Rhoades @coryrhoades.bsky.social · 30/07/2025

Also my first lure prints great. I ended up throwing away the idea of having a lip to make assembly easier and instead made a clamp... "Die?" I guess? I put each half in their side (the eye socket is press fit), some dabs of CV glue and clamp shut. Much better than the clumsy rods.

010

Cory Rhoades @coryrhoades.bsky.social · 30/07/2025

Published my first STL, world's simplest model. Needed a 3 prong to 3 prong adapter for a GoPro mount. Yay SolidWorks classes being put to use! discord.com/channels/@me...

010

Cory Rhoades @coryrhoades.bsky.social · 28/07/2025

Well my ghetto testing indicates that my fishing lure can handle 15 lbs of constant tension.

010

Cory Rhoades @coryrhoades.bsky.social · 25/07/2025

Must make better contrasting colors.

010

Cory Rhoades @coryrhoades.bsky.social · 24/07/2025

My next hat patch design will be dead by daylight themed

010

Cory Rhoades @coryrhoades.bsky.social · 12/07/2025

Trying to figure out a better way to 'mate' the two halves of my part. Dowel rods work but are quite cumbersome. I'd *like* to use a lip brim around everything like this, but results in a lot of floating regions during print which makes me a sad panda

210

Cory Rhoades @coryrhoades.bsky.social · 06/07/2025

I am very happy with the hat pressed result. Also figured out why the colors didn't turn out quite perfect, though I actually like the misprint for myself.

000

Cory Rhoades @coryrhoades.bsky.social · 06/07/2025

Still trying to refine engraving into this tricolor acrylic.

020

Cory Rhoades @coryrhoades.bsky.social · 16/06/2025

A while back I made these minion models. Since then I made a couple for local businesses with the front pocket replaced with their business logo. I love the pictures they've been posting!

110

Cory Rhoades @coryrhoades.bsky.social · 13/04/2025

Trying to make a non-solid side for some tiered lazy susans. Completely solid works great but wanting to save filament and print time if I can. The one on the left of course will require supports. Not ideal. On the right is less filament but significantly more time to print. And it wants supports.

200

Cory Rhoades @coryrhoades.bsky.social · 09/04/2025

So I had made this minion for the contest @bambulabglobal.bsky.social @makerworld.bsky.social was running to reuse empty spools, but a work trip prevented me from finishing it prior to the deadline. So I swapped the spool parts with normal and here it is all done. Diet pepsi for scale.

230

Cory Rhoades @coryrhoades.bsky.social · 28/03/2025

Makerworld has a contest going for re-using the bambu filament refill cardboard inserts in a design. I made something to try to do it, but I don't think I'll be able to print it before the end of the contest to make sure it assembles properly on account of a work event I'm going to tomorrow. Sad :(

250

Cory Rhoades @coryrhoades.bsky.social · 19/03/2025

Making some dioramas terrain for my dead by daylight scenes, gonna paint them

030

Cory Rhoades @coryrhoades.bsky.social · 11/03/2025

@bambulabglobal.bsky.social Q1 2025 is coming to a close in short order. Is the new flagship product being delayed further?

000

Cory Rhoades @coryrhoades.bsky.social · 08/03/2025

Sooo.... I designed this thing in tinkercad. Controller and headphone stand themed after the hooks in Dead by Daylight. Spray brushed and then wrapped wire rope around

460

Cory Rhoades @coryrhoades.bsky.social · 25/02/2025

Finally making some new pokeballs

120

Cory Rhoades @coryrhoades.bsky.social · 24/02/2025

@techconnectify.bsky.social Ya know, maybe that's what I liked so much about bluesky. The manual nature of it. What I hated about X and similar algorithm-heavy platforms was that it would put things in front of me I actively did not want to see. Politics for example.

210

Cory Rhoades @coryrhoades.bsky.social · 24/02/2025

My mom has been using some magnets to connect her remote controls to the stand next to her recliner, but kept knocking them off. I made this in Tinkercad for her and attached it with some double sided tape, problem solved. I also included some slots across the bottom, so dirt can fall through.

140

Cory Rhoades @coryrhoades.bsky.social · 09/02/2025

Wish I understood fusion 360. The controls are unintuitive to me. Tinkercad is more my speed but limited. Thinking of taking a cad class at the local community college lol

230

Cory Rhoades @coryrhoades.bsky.social · 07/02/2025

Mew on deck. @williampetruzzo.com Tried some post processing on this set. Originals below

230