iiinova — where your digital self keeps evolving

Alscalemodels @alscalemodels.bsky.social · 29/09/2026

Now we're cooking! Props done for the Lincoln, one step closer to the test printing stage

011

Alscalemodels @alscalemodels.bsky.social · 27/09/2026

Carried on with the 1/72 Lincoln conversion after a slight break, engines pretty much done, I'll hopefully have the props done by tomorrow.

000

Alscalemodels @alscalemodels.bsky.social · 05/09/2026

First test fit, that’s good enough for me!

0110

Alscalemodels @alscalemodels.bsky.social · 04/09/2026

Edited to the correct size, and reprinted. Will test they fit fully tomorrow, but a rough size comparison with the original parts would indicate they’ll be just fine!

070

Alscalemodels @alscalemodels.bsky.social · 03/09/2026

These have come out alright!! Had to edit the design slightly as it was slightly too wide (my own fault) so that’s been sorted, and the radios have been centred. Will do a final test print tomorrow and check everything fits perfectly.

040

Alscalemodels @alscalemodels.bsky.social · 03/09/2026

1/32 Revell Mosquito Mk.iv radio set and control column upgrade parts, they're on the printer now, and if they come out alright and fit nicely, they may be available soon!

030

Alscalemodels @alscalemodels.bsky.social · 02/09/2026

Another quick drawing, this will be, once test printed, a replacement control column for the Revell Mosquito Mk.iV 1/32

030

Alscalemodels @alscalemodels.bsky.social · 31/08/2026

So for the past couple of weeks, I've been working on a rather large project for the Lancaster. This is still very much a work in progress, but this will convert teh Lancaster, to the Lincoln using the Mk2 kit. I'm following how Avro extended their wing tips, by cutting them 1-2

151

Alscalemodels @alscalemodels.bsky.social · 20/08/2026

HK 1/48 Nose turret delete fits perfectly!! Available on eBay. ebay.io/m/VgyYFv

051

Alscalemodels @alscalemodels.bsky.social · 20/08/2026

Lancaster 1/48 nose turret delete for the HK kits. printed one off already, fit was 95% perfect, just needed a slight but more adding to the rear. I've edited the design and the second version is on the printer now.

010

Alscalemodels @alscalemodels.bsky.social · 20/08/2026

Completely redrawn the 1/48 nose turret delete as I wasn't happy with the flat section on the top it it. This version is much more naturally rounder. I will test print this evening and see how it fits.

170

Alscalemodels @alscalemodels.bsky.social · 16/08/2026

GBU-16 in 1/72, 1/48 & 1/32 flavours

060

Alscalemodels @alscalemodels.bsky.social · 16/08/2026

The 1/72 & 1/48 GBU-16 have come out perfect, just need to alter the supports on the 1/72 version as they’re a little thin. 1/32 version is nearly done, but looks ok so far.

160

Alscalemodels @alscalemodels.bsky.social · 15/08/2026

GBU-16 all supported up and on the printer, will update once they're finished.

030

Alscalemodels @alscalemodels.bsky.social · 15/08/2026

The finished product, Sherman tank snorkel kit, printed absolutely perfect. Available in 1/35 & 1/48. ebay.io/m/RjLeKz

071

Alscalemodels @alscalemodels.bsky.social · 14/08/2026

GBU-16, sacrificial tabs added, ready to test print this weekend at some point.

030

Alscalemodels @alscalemodels.bsky.social · 14/08/2026

GBU-16, just need to add some sacrificial tabs to the fins and test print, but these should be available soon in 1/72-24 on eBay. Potentially 1/16 too if they fit in the printer!

040

Alscalemodels @alscalemodels.bsky.social · 09/08/2026

This next thing I’m working on has been one of the most requested modifications I’ve been asked for in the last 4-5 odd years. Updates to follow.

040

Alscalemodels @alscalemodels.bsky.social · 04/08/2026

Lancaster fire extinguisher, mounted on twin and single brackets.

051

Alscalemodels @alscalemodels.bsky.social · 03/08/2026

Lancaster & B-17 ABC (Airborne Cigar) transmitter 's on the printer, 1/72 & 48 scale test.

010

Alscalemodels @alscalemodels.bsky.social · 02/08/2026

Type 313 transmission mast for the ABC Airborne Cigar, fitted to both Lancaster and B-17 from No. 100 Group RAF . Found some accurate dimensions after a few hours of research. Will be test printed tomorrow

030

Alscalemodels @alscalemodels.bsky.social · 02/08/2026

Nose turret delete for the HK and Tamiya 1/48 Lancaster, designed this morning and on the printer now. Hopefully these should fit, should open up a line of conversions for later variants.

040

Alscalemodels @alscalemodels.bsky.social · 29/07/2026

The 1/48 version of the Sherman M4A1 snorkel kit has been released. ebay.io/m/WSS0eo

ebay.io

021

Alscalemodels @alscalemodels.bsky.social · 28/07/2026

This thing arrived today. Means I can print a 1/48 version of the deep wading snorkel and test fit it. Should be a straight fit, if so should be able to release it for sale soon!

091

Alscalemodels @alscalemodels.bsky.social · 28/07/2026

WW2 Lancaster fire extinguisher, early version.

130

Alscalemodels @alscalemodels.bsky.social · 28/07/2026

WW2 aircraft escape axe, drawn in 1/1, will do a test print in 1/48 later today.

031

Alscalemodels @alscalemodels.bsky.social · 24/07/2026

Sherman deep wading kit, design is 99% finalised, just going to add some sacrificial tabs to the lower funnel parts, so it prints perfectly. Parts will be fully 3D printed, rather than part resin, part Photo etch metal. Will be available in 1/35 & 1/48 soon.

191

Alscalemodels @alscalemodels.bsky.social · 20/07/2026

Rear section printed out after adjusting the supports. All parts fit perfectly, and friction fit together nicely. These are pre production, and I’ll need to add details before the design is complete. Still bloody happy with how the grills have come out!

0102

Alscalemodels @alscalemodels.bsky.social · 19/07/2026

Work in progress, Sherman Tank deep wading gear. The majority of the work is done. just need to add fine details etc, then test print. Quite happy with the mesh, that's a first for me drawing that, so learnt a new skill doing this one. looking at 1/35 & 48.

030

Alscalemodels @alscalemodels.bsky.social · 10/07/2026

Work in progress, AGM-114 Hellfire missile.

010

Alscalemodels @alscalemodels.bsky.social · 06/07/2026

RAF type B bomb trolley, printed in 1/72, 48 & 32. Come out perfectly, not bad for a couple of hours drawing.

050

Alscalemodels @alscalemodels.bsky.social · 05/07/2026

RAF Type B Bomb trolley, done! Available on eBay ebay.io/m/1GMwWQ

1142

Alscalemodels @alscalemodels.bsky.social · 04/07/2026

Type B bomb trolley WIP, need to add a few more details, such as tie rods, nuts and bolts etc, but its nearly ready for a test print.

030

Alscalemodels @alscalemodels.bsky.social · 03/07/2026

Work in progress, type B bomb trolley.

030

Alscalemodels @alscalemodels.bsky.social · 22/05/2026

Lancaster bomber pilots seat, trim controls and landing gear controls. Available in 1/72, 48 & 32. A night little upgrade over the standard kit versions. ebay.us/m/hHBg3Q

ebay.us

010

Alscalemodels @alscalemodels.bsky.social · 17/05/2026

Lancaster seat test prints! 1/72 & 1/48 prints compared to their respective Airfix 1/72 and Tamiya 1/48 standard kit versions

080

Alscalemodels @alscalemodels.bsky.social · 14/05/2026

More work done on the Lancaster seat.

060

Alscalemodels @alscalemodels.bsky.social · 12/05/2026

More progress with the Lancaster pilots seat.

040

Alscalemodels @alscalemodels.bsky.social · 11/05/2026

Update on the Lancaster pilots seat, making decent progress.

020

Alscalemodels @alscalemodels.bsky.social · 10/05/2026

Lancaster Yoke and control column done!

061

Alscalemodels @alscalemodels.bsky.social · 09/05/2026

Lancaster ‘Window’ dispenser done, and control column and yoke work in progress. Need to add the brake lever.

161

Alscalemodels @alscalemodels.bsky.social · 28/04/2026

HK 1/48 Mk3 paddle props are now available. ebay.us/m/ctc0xJ

030

Alscalemodels @alscalemodels.bsky.social · 28/04/2026

Well these have come out perfect!! 1/48 paddle blades for the HK Lancaster Mk1 kit, to convert to the late Mk1 or Mk3. They should be available very soon!

060

Alscalemodels @alscalemodels.bsky.social · 28/04/2026

Redesigned the hub to hopefully fit the HK kit, altered the connecting part to make it thinner to fit in the spinners, without having to modify them. Just need to test print later on.

010

Alscalemodels @alscalemodels.bsky.social · 27/04/2026

So after slightly altering the profile of the propeller, these have printed out perfectly! I’m now going to alter the hub slightly so it’s fully compatible with the 1/48 HK Lancaster to make it Mk3 compatible.

150