iiinova — where your digital self keeps evolving

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 27/09/2026

Betty has the stomach of a labrador, the staring skills of a pointer, and the brain of a ginger cat.

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

I only have three more space kitty jewelry holders in the current purple-hued galaxy black on the right in the photos - once those are sold out I’ll run the next batch in the color on the left. wyrdingstudios.com/products/cel...

Two space kitty jewelry holders, in very similar shades of sparkly almost-black. The one on the left is more of a navy blue and the one on the right is slightly purple.

The same two jewelry holders at a slightly different angle that shows the sparkle better.

0144

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

This one? It could definitely be either a pendant or a broach - no good way to make a broach double-sided, alas, unless you wanted it to dangle from a bit of wirework/accent beads that would have the pin part? I think I could come up with a way for that to be reversible. Can try to sketch tomorrow!

The image from the skeet being replied to, with the smaller Fordite cab circled in green

110

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

Group photo of the entire batch so you can compare sizes and/or enjoy drooling at all of them in one place. (The one with the pink on the lower right side of the group is the one that’s staying with me. You may yell at me some more about that. Honestly I don’t blame you.)

All of the Fordite cabs from the previous skeets, clustered together on a wooden workbench. There’s part of a pink leafy necklace in the background.

0100

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

There’s actually one more, but it’s staying with me, sorry. I know a lot of you are going to yell at me about this one not being available. 🫣 (If it’s any consolation, the back is kind of boring?)

A teardrop of Fordite in metallic silver, magenta, and blue.

The back is solid blue with a thin band of white around the edge. It’s not nearly as interesting as the backs of the others.

190

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

Last two. Really tight banding on the smaller round one on both sides.

Two round Fordite cabs. The smaller one has extremely narrow concentric banding in almost perfect circles. The larger one has mostly parallel banding that ripples a bit.

The other sides. These two don’t really have a clear front or back. Lots of pumpkin-orange in the larger one, and some yellow at the center of the smaller one.

230

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

Pretty sure these were cut from the same piece of material. The oval has an odd cut running through it that looks intentional-ish? A little bit of bright metallic teal in both of these.

A rectangle and a teardrop, with mostly concentric wavy banding in grey, white, red, yellow, and blue.

The backs. The rectangle is mostly dark grey and silver with teal and bright blue. The oval has multiple areas of concentric banding in grey; red, white, blue, and teal.

A closer look at the cut through the teardrop. It’s a feature, not a bug.

230

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

These two are a little less showy than some of the others but still cool.

A teardrop and an elongated oval. Both mostly silver, grey, white; and red.

The backs. The teardrop has slightly wavy parallel bands in white; black; red, and a little bovine. The oval has wavy curved bands in white; grey, olive green, black, and yellow.

250

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

Excellent concentric banding on the front of these three, but the backs are kinda boring. I forgot to say that ALL of these have at least a little metallic color in them.

A trio: oval, round, and sort of a triangular teardrop. These have a lot of silver and some blue, and the oval has a dot of yellow in the center. The round has a sparkly green band at the center, and there’s a little yellow in the oval-ish one.

The backs. Mostly grey, not super interesting. The oval has semi-concentric rippled banding and the round has a little pop of blue.

150

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

Two slightly less well matched but still nicely symmetrical pairs. Again, willing to break up the pairs if nobody wants them as earrings.

Two pairs of Fordite cabs, one long teardrops and the other slightly off-kilter rounds. The teardrops are red and blue and white and silver, the rounds are red and silver and orange and white with a little blue in one.

The backs of the pieces in the previous photo. The teardrops are partially concentric banding with blue and grey. The rounds are parallel bands of red and white and dark grey, with some blue in one of them.

390

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

I have two very well matched pairs, both with really neat carving on the top layers. They’re big for earrings but very lightweight. If nobody wants them as earrings I am willing to break up the pairs.

Two pairs of Fordite cabs in a person’s hand. One pair is almost square and the other is triangular. The colors are mostly black, white, grey, and red in concentric bands.

A slightly different angle showing the carving a little better.

The reverse side. The squares have wavy parallel banding and the triangles are slightly circular parallel bands. The triangles have a little green and the squares have some blue on this side.

281

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

Restocked! wyrdingstudios.com/products/und...

A pair of earrings made from blackened teal glass maple leaves and swirly silver wire in the palm of a person’s hand.

A pair of earrings made from blackened teal glass maple leaves and swirly silver wire against a wooden background.

2103

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 24/09/2026

The third order of these beads is out for delivery today, restock dropping sometime later this afternoon.

A pair of earrings made from blackened teal glass beads shaped like maple leaves and swirly silver wire.

1252

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 23/09/2026

Hello yes do you need a tiny gay art? Or would you like to send someone a tiny gay art? wyrdingstudios.com/products/min...

22313

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 23/09/2026

Also Lailah would like it to be known that she only got one (1!) packet of gooshyfud this morning and she is wondering if any lawyers would like to take her case or if she just needs to resort to biting me as usual

An elderly black cat with yellow eyes who would like second breakfast now

2181

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 22/09/2026

These earrings are now available in two colors! wyrdingstudios.com

A pair of earrings made from interestingly shaped faceted crystal beads that flash purple and pink and gold. They are wider than they are tall and have swirls of silver wire.

A pair of earrings made from interestingly shaped faceted crystal beads in a deep red color. They are wider than they are tall and have swirls of silver wire.

23616

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 22/09/2026

Welp, guess I’m done with Meta, because I don’t pay extortion fees.

A screenshot of a message telling me that I can’t post more than two links a month on my FB page unless I pay extortion fees, which I shan’t be doing because 🖕🏻

3140

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 18/09/2026

I like big beads and I can not lie (I almost never find garnets this big, I slapped the add to cart button SO fast when I saw these)

Strands of large dark red garnet beads held across a person’s palm

0170

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 14/09/2026

I reeeeeeeeally dislike the trend of customer service reps (both human and AI bots pretending to be human 🤬) using my first name in every. damn. message. I KNOW WHO I AM, YOU KNOW WHO I AM, STOP WASTING TIME AND JUST FIX MY PROBLEM ALREADY

A photo of a chat conversation between me and a customer service rep who I am quite certain is a bot and not a human, concerning the fact that I can’t get certain shipping rates to show up at checkout on my website.

Bot: Got those, thank you, Kythryne! Our specialist is reviewing those products now. I'll be back with you as soon as we have an update.

Me: It is happening with every product I have tried across multiple collections. and with residential addresses in NH, CA, NY, and FL

Bot:Thank you, Kythryne. I know you've been very thorough with your testing and I really appreciate that. We're still working on this and I'll have an answer for you soon.

Bot: Thanks for your patience, Kythryne. Our specialist is running a test right now. I'll have an update for you very shortly.

Bot: Great news, Kythryne! I'm going to hand you over to our shipping specialist, Oliver, who has been reviewing your case and will be able to help you directly from here. You're in great hands!

Chat transferred

2140

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 13/09/2026

(I also have a variety of things upon which to store your jewelry, should you be suffering from an overabundance of shinies and an underabundance of organization.)

A collage of five photos of jewelry organizers. Two are shaped like crows, one is a tree, one is a cat, and there is also a panda.

42415

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 13/09/2026

Hiiiiiii can I interest you in shiny things? I’ve been out sick for a week so no new pieces, but I did restock some sold-out leaf earrings and there are other pretties that haven’t found a home yet. wyrdingstudios.com (Shares very appreciated since being out sick for a week is, uh, Kinda Not Great)

A collage of seven photos of jewelry made with colorful beads and swirly wire. There are two necklaces, two pendants, and three pairs of earrings, mostly made with flower and leaf beads.

78377

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 10/09/2026

I also have art prints and greeting cards of digital watercolor versions of my celestial kitty artwork in various Pride colors: wyrdingstudios.com/collections/...

Mini art prints of digital watercolor artwork of a seated cat with a pattern of stars and moons. The colors are blended to look like geodes or nebulas.

Two greeting cards with the same artwork as the mini prints.

0243

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 10/09/2026

Hello and thank you for doing this! I’m a full-time jewelry artist & have recently branched out into 3D printed jewelry organizers based on my original art, including this celestial kitty inspired by my three house panthers and the obsolete Felis constellation! wyrdingstudios.com/products/cel...

A 3D printed jewelry organizer shaped like a seated cat with star and moon cutouts holding earrings and other jewelry.

The 3D printer jewelry organizer from the previous image, next to a black cat with yellow eyes.

414431

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 09/09/2026

Okay, I can’t be on my feet long enough to take real product photos today, but if you already know that you want a pomegranate jewelry holder and don’t want to wait any longer, they’re up on the website in both colors! wyrdingstudios.com/products/pom...

A 3d printed jewelry holder shaped like a pomegranate with a tree of life inside it, in dark red.

A 3d printed jewelry holder shaped like a pomegranate with a tree of life inside it, in a deep plum/berry purple-red with a bit of colorshift to it.

A collage of the plum/berry version at four different angles, showing the range of colors

A collage of four photos of the red version, showing the way it looks at different angles

2199

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 09/09/2026

When the human says you can’t put your paws in her water glass

A photo of an elderly black cat with yellow eyes, glaring at the person taking the photo

0221

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 09/09/2026

@chellenator.bsky.social is this the sort of color you’re thinking? If not, absolutely no worries because it’s gorgeous! I’m going to go ahead and run one of the pomegranate trees in it today, I’m positive somebody will want it even if I don’t end up putting both colors into production. :)

Two 3d printed cat toys in a person’s hand. One is a deep blood red and the other is more of a purple-pink berry red.

170

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

I did consider this one but reviews said it pulls very purple-pink (filament colors often look different printed than they do in stock photos or even on the spool) and I wanted to stay closer to a pomegranate/blood red…

A stock photo of dark pinkish-burgundy 3d printer filament

000

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

I haven’t been able to find a filament in that shade of red, unfortunately - I can keep looking but dark reds are weirdly rare for some reason. One of the other reds I tried was darker but it pulls very bronze, I ended up using it for these trees.

3d printed trees in a burgundy/bronze color

010

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

This sparkly red is SO GOOD. Even the video doesn’t do it justice.

070

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

Assuming the next few prints go as smoothly as this one did, I should be able to get this on the website tomorrow.

A photo of a pomegranate-shaped jewelry holder 3D printed in a deep sparkly red filament

2212

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

I’m also working on an acorn/oak leaf design and had the same idea for the acorns. With the same results.

Vector art of an acorn with oak leaves and smaller acorns inside it. Three of the acorns have pairs of round circles that look unnervingly like eyes.

180

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

For the record, this was how my first attempt looked. I, uh… no.

A photo of an iPad with a vector art app showing the artwork for the pomegranate jewelry holder. The “eyes” on the pomegranate are much bigger in this version. 💀

3120

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

I also hoped that it would be better once they had earrings on them. So I ran a test print and hoped for the best. …I was very wrong on both counts. VERY VERY WRONG. 🤣

A red 3d printed jewelry holder shaped like a pomegranate tree. The pomegranates have two tiny holes in them. One set of holes is holding a pair of round mystic topaz studs. It makes the pomegranate look like the 😳 emoji.

Another pomegranate, this time with square iolite studs. It resembles 🤓

8295

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 07/09/2026

I really wanted to use the six small pomegranates on the tree for stud earrings. They’re the perfect size for it! But adding a pair of holes made them look like cursed skulls. So I thought maybe if I made the holes really tiny they wouldn’t look quite so much like eyes?

A close up of the pomegranate tree jewelry holder with two small holes in each pomegranate. They do indeed look like skulls, although not quite as cursed as the larger holes looked.

6193

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 05/09/2026

HAH. GOT IT. Even managed to pull off mirroring them.

A pair of earrings made from interestingly faceted glass beads and swirls of silver wire.

1401

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 04/09/2026

This is probably a long shot, but I’m going cross-eyed trying to figure out how I did the loops on these earrings. It’s a variant of a technique I do all the time but I must have done SOMETHING weird at the top because I can’t replicate it. If you have a pair, could you take photos of them for me?

A slightly blurry pair of earrings made with interestingly faceted blue beads and swirls of silver wire.

Same earrings, different color, even blurrier photo.

2142

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 03/09/2026

If you were hanging this on your wall, which angle would you want? (Both might be an option. Won’t know until I do a test print.)

A vector art app on an iPad with a design of acorns and oak leaves inside a large acorn. The large acorn is slanted to the left at about a 45 degree angle.

The same design, but rotated so the stem is pointing straight up.

441

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 02/09/2026

Oh no I might need to learn how to do lost wax casting

A black and white image of an openwork acorn with three oak leaves inside it

0120

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 02/09/2026

Cool, cool, I wanted to use up half my exertion budget for the day in half an hour *thisisfine.gif*

A screenshot from the visible app showing a pacepoints budget of 5, 2.5 of which have been used. It also shows a heart rate of 97bpm.

190

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 01/09/2026

I’ve only been using it for about a week so the jury’s still on how useful it’s going to be (although it’s validating to see that yes, I really DO get inordinately tired doing certain ADLs 😑) but wearing the visible tracker on my watch band instead of the awful band it came with is working well.

A photo of a person’s forearm and wrist, with an Apple Watch on a metal band. Slightly behind the Apple Watch on the same band is a health tracker that has been threaded onto to the band through two loops.

The person has pale skin and colorful floral tattoos.

180

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 28/08/2026

The last of the summer florals just went up on the website, along with a new limited edition color of the tree jewelry holder. wyrdingstudios.com

A collage of seven photos of jewelry made from flower and leaf beads and swirly silver wire.

A collage of three photos of a 3d printer tree shaped jewelry holder in a dark burgundy color that shifts to purple and bronze depending on the angle of the light.

1136

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 28/08/2026

I managed to print my test without the posts and cord attachment thingies on the back 🤦🏻‍♀️ but I think this is a lot better and it turned out sturdier than I expected. I can probably even remove some of the connecting bits I added in between branches, which will make it more useful for pendants too.

A 3d printed jewelry holder shaped like a pomegranate with a tree of life inside it.

6190

Kythryne Aisling/Wyrding Studios @wyrdingstudios.com · 28/08/2026

Okay, this works a lot better visually, I think? Black will be solid, white will be open. The next question is… will it be strong enough once I print it?

A photo of an iPad with a vector art app open to an image of a tree of life inside a pomegranate.

0120