iiinova — where your digital self keeps evolving

triaxe miniatures @triaxeminitures.bsky.social · 20h

me when sleep deprivation kicks in

triaxe miniatures @triaxeminitures.bsky.social · 20h

just one print of two models to go and i have at least 7 weeks of twitch content to work with, im thinking Monday will be fo r gaming, wednesday will be model preparation (priming off air) and saturday for painting but im still unsure about start times

021

triaxe miniatures @triaxeminitures.bsky.social · 03/10/2026

i now have nearly everything for streaming except minor things like extra paints and isopropyl but those can be bought when needed, just hope i get some viewers as this would have been a very expensive waste of time if i dont

010

triaxe miniatures @triaxeminitures.bsky.social · 03/10/2026

fingers crossed this will solve my camera cable problems

010

triaxe miniatures @triaxeminitures.bsky.social · 02/10/2026

i took me nearly 4 hours and a bunch of repairs due to the chains snapping but i managed to get these parts free of the supports but in the end i had to hlue all 5 parts together just for convenience and yes the chains that dangle and a few others have proper independent links

030

triaxe miniatures @triaxeminitures.bsky.social · 02/10/2026

my greatest annoyance when printing models is when parts should fit but don’t, this isn’t going to be too much of a problem but still very annoying

120

triaxe miniatures @triaxeminitures.bsky.social · 02/10/2026

just purchased the last things i need for my channel and fingers crossed the cables i currently have for my cameras are long enough as i dont think i can buy a powered hub i can trust as most on amazon are sketchy af or are a 50/50 bet at best

010

triaxe miniatures @triaxeminitures.bsky.social · 01/10/2026

i think im getting a little burnt out or im just not paying attention as dome parts of this model are out by a percent or two, tbh im thinking after two more models (2 in one print) im giving printing a little rest until i can get everything set up in my new room

010

triaxe miniatures @triaxeminitures.bsky.social · 30/09/2026

smol kitty for my vash the stampede model

140

triaxe miniatures @triaxeminitures.bsky.social · 30/09/2026

elvira is finished and ive started on vash the stampede, ive got three more models to go but im nearly out of resin so there might be a slight pause in my model printing marathon but thankfully it’s only for a couple of days

001

triaxe miniatures @triaxeminitures.bsky.social · 29/09/2026

since i painted this guts from berserk a few people in the discord servers i hang out on have requested Casca as well and i will happily oblige

030

triaxe miniatures @triaxeminitures.bsky.social · 29/09/2026

something ive been wanting to do for a while so i bought the stl, unfortunately the cockpit in this mode is garbage and as such i will have to build my own version as well as the cargo bay which isn’t included

a picture of an stl file for the serenity ship from firefly

030

triaxe miniatures @triaxeminitures.bsky.social · 29/09/2026

i used more material for the supports than i for the skirt lol i really need to use less supports

130

triaxe miniatures @triaxeminitures.bsky.social · 28/09/2026

this lady will hopefully be finished tomorrow

040

triaxe miniatures @triaxeminitures.bsky.social · 27/09/2026

decides to relevel my print platform so fingers and toes crossed it doesn’t mess everything up as every time ive done it something has gone wrong 🤞🤞🤞🤞

020

triaxe miniatures @triaxeminitures.bsky.social · 27/09/2026

update: due to a problem with printing the head of the hound ive decided not to print this model most due to the fact that i completely forgot what scale % i used lol so i will put this one aside and continue with a different model

000

triaxe miniatures @triaxeminitures.bsky.social · 26/09/2026

the Snorf is finished lol it looks like a derpy puppy lol

020

triaxe miniatures @triaxeminitures.bsky.social · 25/09/2026

well i had a snooze and i’ve decided to continue with this model as not only do i want to show my successes but also my failures but tbh it probably looks off because it’s bare resin and will probably look better once i start painting

020

triaxe miniatures @triaxeminitures.bsky.social · 25/09/2026

just finished the body of alucard and alas one bat on his coat didn’t survive, tbh im not really sure i like the overall look of this model as the hair and hat look off to me but i will sleep on it and decide if i want to continue printing the other parts

030

triaxe miniatures @triaxeminitures.bsky.social · 25/09/2026

well the microscope is already paying for itself as this kind of repair would be impossible without it

031

triaxe miniatures @triaxeminitures.bsky.social · 24/09/2026

6 models down 4 to go, i will be adding more if resin allows but most of those will be miniatures

000

triaxe miniatures @triaxeminitures.bsky.social · 24/09/2026

one of many non warhammer minis i will be painting

050

triaxe miniatures @triaxeminitures.bsky.social · 22/09/2026

did a test for eyelashes on a 3.5 inch old model bust and it came out decently well, in future i will probably have to water down the mod podge im using as glue for more working time and i will need precision scissors her right eye) and i will have to add a few more strands as well as pre curl them

030

triaxe miniatures @triaxeminitures.bsky.social · 22/09/2026

room idea: i was going to buy a picture or some kind of tapestry thingy but i thought smeg it im going to paint a design

020

triaxe miniatures @triaxeminitures.bsky.social · 21/09/2026

finally some good precision tweezers so now i can add eyelashes to some of the models i will be doing

010

triaxe miniatures @triaxeminitures.bsky.social · 21/09/2026

yay new bit of hobby tech has arrived and seems to work

020

triaxe miniatures @triaxeminitures.bsky.social · 20/09/2026

well last update on the channel, i have found a long enough cable for my microscope and i’ve tested the video for both cams and other than the placement of the arms that my cameras and lamp are attached to everything is near perfect so all i need to do is a small test stream

010

triaxe miniatures @triaxeminitures.bsky.social · 20/09/2026

🤬🤬🤬🤬🤬 about ready to chuck this channel in the bin, i bought some 5 meter usb extension cables and the main camera shows up glitchy and my microscope won’t even register using them, tbh im not surprised but it would have been nice if it worked straight away

111

triaxe miniatures @triaxeminitures.bsky.social · 19/09/2026

my idea for a dust extraction system was a bust and i might have to find a hepa filter thats cheap enough but catches the dust or im going to have to shell out for an inline extractor fan and some how jerryrig it to my current fans and either blow the dust outside or into some kind of collection bag

100

triaxe miniatures @triaxeminitures.bsky.social · 19/09/2026

i will be going live tonight to test out how my system does with two cameras as well as seeing if my mic picks up my dust extractor, i will probably do some preping on a 3d print while i’m at it

000

triaxe miniatures @triaxeminitures.bsky.social · 19/09/2026

dammit the more i think about my new painting area the more i want to buy new stuff i might need lol definitely gonna need storage, gonna need other bits and pieces….i needyo stop shopping lol

010

triaxe miniatures @triaxeminitures.bsky.social · 18/09/2026

might do a test stream for my cameras and possibly do a bit of prep work for one of the models i will be painting, im still unsure if my audio is ok or not as i didnt have anyone watching last time to check but it seems ok on my end

000

triaxe miniatures @triaxeminitures.bsky.social · 17/09/2026

other than a few random storage things ive got everything i need for my channel

020

triaxe miniatures @triaxeminitures.bsky.social · 17/09/2026

yay in 6 months i might be getting a new pc so fingers crossed some of the prices will come down a little before then

010

triaxe miniatures @triaxeminitures.bsky.social · 16/09/2026

gonna have to save up for a xlr mic and mixer at some point

010

triaxe miniatures @triaxeminitures.bsky.social · 16/09/2026

going to do a test stream at about 8pm gmt so i can test out if all my audio and scenes work, im just going to play a game so no model making until i get my area set up but this is mainly a test to see if people hear my ptinter,keyboard and mouse clicks www.twitch.tv/triaxeminiat...

twitch.tv

TriaxeMiniatures - Twitch

bacon enthusiast and painter of minis — TriaxeMiniatures streams live on Twitch! Check out their videos, sign up to chat, and join their community.

010

triaxe miniatures @triaxeminitures.bsky.social · 16/09/2026

some people have asked me in recent months if i was going to go back to painting warhammer and the answer is probably no as it’s far too expensive nowadays, i still have a small pile of shame to get through but very little to no inclination to do it as resin printing is by far more rewarding

0171

triaxe miniatures @triaxeminitures.bsky.social · 15/09/2026

my first attempt at making eyelashes for models was less than successful lol definitely need better precision tweezers (this is at around 1.5 mm

120

triaxe miniatures @triaxeminitures.bsky.social · 13/09/2026

i swear people are getting dumber by the second, my friend just sent this asking if it was real 🤦ive very close to going to his house and kicking his ass for being so dumb

230

triaxe miniatures @triaxeminitures.bsky.social · 13/09/2026

unfortunately original idea for my microscope feed didn’t pan out so i will have to deal with wires but i may have a different solution which is just attach my tablet screen to my pc with longer cables lol

010

triaxe miniatures @triaxeminitures.bsky.social · 12/09/2026

it’s taken all bloody day but i’ve finally managed to get to the windows 10 set up section on my old laptop yay

020

triaxe miniatures @triaxeminitures.bsky.social · 12/09/2026

trying to reset a slow assed laptop is extremely frustrating

110

triaxe miniatures @triaxeminitures.bsky.social · 12/09/2026

one more file and my 3rd model will be done but for the rest im kinda unsure what i want to do

010

triaxe miniatures @triaxeminitures.bsky.social · 11/09/2026

happy days ive managed to get my microscope to run on my laptop and feed that to my main pc so all i need now is a usb hub so i can have all the camera cables accessible and with that all taken care i just need to wait until next month so i can buy all the last parts i need

030

triaxe miniatures @triaxeminitures.bsky.social · 10/09/2026

unfortunately i might not not be able to include my microscope into my stream as my laptop isn’t cooperating lol

120

triaxe miniatures @triaxeminitures.bsky.social · 10/09/2026

i was asked on discord how i could tell the difference between ai and human made 3d models…. urrghhh!!!

000