iiinova — where your digital self keeps evolving

Topvint @topvint.co.uk · 22/09/2026

If you like what you are seeing, check out my website for send-in services. If you don't see something you want listed, get in touch as is quite possible I can also do it! topvint.co.uk/product-cate...

topvint.co.uk

Send-in Services - Topvint

100

Topvint @topvint.co.uk · 22/09/2026

Time to test some games!

120

Topvint @topvint.co.uk · 22/09/2026

While I recapped the PSU, customer asked me to install a modern one. To be honest, I'm not sold on 12V barrel PSUs... you still need an external brick with the right connector, while something like a USB PSU, you can potentially use your existing setup and cables 🤷

120

Topvint @topvint.co.uk · 22/09/2026

On the optical drive, I disassembled it and cleaned it, while recapping it as well. In Saturn optical drives (as is also the case in other consoles), you need to desolder the motors to be able to remove the bottom PCB were the capacitors are

120

Topvint @topvint.co.uk · 22/09/2026

This model has a doubtherboard for the the controller ports. I have recapped many of this 😊

120

Topvint @topvint.co.uk · 22/09/2026

The FRAM chip is the same size than stock but the BIOS is a bit longer. In both chips, a few pins need lifting an connected to power and ground

120

Topvint @topvint.co.uk · 22/09/2026

I found the two V·Saturns I have worked on to have plenty of epoxy under the chips, which is an issue with removing them! Using some aluminium tape to protect the surrounding area. Better safe than sorry!

120

Topvint @topvint.co.uk · 22/09/2026

The console was in good state so the TLC focused on cleaning and later lubricating the optical drive. The console was also slightly yellowed in one corner, so I retrobrighted it.

120

Topvint @topvint.co.uk · 22/09/2026

Some more pictures of that branding before opening it up!

120

Topvint @topvint.co.uk · 22/09/2026

Order #6588 I refurbished, fully recapped, installed a region-free BIOS and an FRAM mod into this SEGA V·Saturn! This is the second Victor Saturn I work on and I love the different branding. Want to see what I did? Check below 👇

171

Topvint @topvint.co.uk · 19/09/2026

Yeah thanks, saw that. First of, however, will be to do something temporal to see if it works at all (apart from the laser, which is buggered for sure)

000

Topvint @topvint.co.uk · 19/09/2026

Indeed. Also time to figure out how to power it without one of those weird power supplies ...

100

Topvint @topvint.co.uk · 19/09/2026

I have one, but mine is broken for real 😁

101

Topvint @topvint.co.uk · 08/09/2026

Check my website if you are interest in original xbox mods! topvint.co.uk/product-cate...

topvint.co.uk

Original Xbox - Topvint

021

Topvint @topvint.co.uk · 08/09/2026

The shields were sanded and repainted, and a 500GB SSD installed alongside a Startech SATA2IDE adapter and an ASUS UDMA ribbon cable. A ModXo modchip with PrometheOS was also installed, Cerbios 3.1 in bank 1, and the UIX Lite dashboard 😊

150

Topvint @topvint.co.uk · 08/09/2026

I recently refurbished, modded and reshelled this OG Xbox. Customer also provided a custom jewel. I am not so much for dyeing crystal shells but I have to admit it looks pretty nice 😎

150

Topvint @topvint.co.uk · 02/09/2026

Thanks for the mention!

000

Topvint @topvint.co.uk · 02/09/2026

Awesome, looking forward to it. Always excited for new consoles

110

Topvint @topvint.co.uk · 02/09/2026

It depends what you choose, air or ground shipping. Air maybe takes a couple of weeks. Ground 2 or 3 months but is much cheaper.

000

Topvint @topvint.co.uk · 01/09/2026

Got mine from Doorzo directly from Japan with a bunch of other things (MSX, Loopy, Neo Geo CD, Pc-Engine Duo, etc). Definitely more options than eBay

100

Topvint @topvint.co.uk · 01/09/2026

Not sure if is the plague or not, but SMS caps definitely go wrong too. This is classic in Saturn consoles (no video) and there is a well known fault in some PSOne consoles where that also causes issues (again, no video)

010

Topvint @topvint.co.uk · 01/09/2026

Yea, I used that method. I have tried many other things and I find that most effective and safest for the plastic parts

010

Topvint @topvint.co.uk · 01/09/2026

Well, if you ever want a second pair of eyes on it let me know. Not for money, btw, just curiosity.

120

Topvint @topvint.co.uk · 31/08/2026

I am adding PC-FX services to my site, but given how complex this console is to take apart and recap, and how many parts it has to retrobright, is going to have to be more expensive than other similar services

031

Topvint @topvint.co.uk · 31/08/2026

I plugged it into my external step down power supply and tried the only game I have. It works! notice how yellow the controller is compared to the console... I need to find a way of whitening that too!

162

Topvint @topvint.co.uk · 31/08/2026

The retrobrighting took 3 loads even if I only did the external parts 😁In the end it all came out quite well. Then spent like an hour putting all back together worried that I missed an screw somewhere 😂

240

Topvint @topvint.co.uk · 31/08/2026

While the shell soaked I turned my attention to the CD drive. Pretty standard stuff... will it work when I put all back together? 🤔

130

Topvint @topvint.co.uk · 31/08/2026

Having suffered the pain of disassembly, I decided to wash and retrobright the console before reassembling. I had to remove the switch that tells the CD that the lid is closed, and thought I'd sand the contacts slightly to ensure good connection. That's a lot of plastic parts to wash...

140

Topvint @topvint.co.uk · 31/08/2026

The main board has through-hole caps and the sub-board mostly SMD caps, apart from two "hidden" through-hole caps installed as surface mounted, a la GameGear style. There is also a super capacitor. Thankfully Console5 had the right kit.

260

Topvint @topvint.co.uk · 31/08/2026

And the two boards also have a soldered extra shield, which took a fair amount of super-wick to remove 😥

150

Topvint @topvint.co.uk · 31/08/2026

Slide side panels out, unclip the front panel, unclip and unplug the top laser assembly, unscrew and unclip back panel, unscrew and remove shield and main board and both earth cables, remove PSU, unscrew and remove shield and sub-board, remove 3 plastic extension brackets and bottom shield...

150

Topvint @topvint.co.uk · 31/08/2026

This unit was visibly dirty but I didn't know if the laser would work or not. Rather than testing it, I decided to recap the console first just in case. That of course meant to disassemble the console... this must be the most complex console to disassemble after the Panasonic Q 🫠

170

Topvint @topvint.co.uk · 31/08/2026

The PC-FX was the 32 bit entry to NEC's line of consoles, which peaked with the 8/16 bit PC-Engine . The PC-FX never left Japan, probably due to its commercial failure, and was the last console NEC released. The PC-FX can't really do 3D graphics in a generation where 3D was king, like PS1 or N64.

160

Topvint @topvint.co.uk · 31/08/2026

I refurbished this PC-FX I recently got from japan, and it ended up working great 😁 I always buy "junk" items and many times they look bad but end up working just fine, although other times repairs I needed. Want to see what I did? Check it below! 👇

3775

Topvint @topvint.co.uk · 31/08/2026

Not the Sony cd-i, I haven't. Closest thing is probably the CDX / Multi-Mega. Wouldn't mind looking at one 😁

120

Topvint @topvint.co.uk · 26/07/2026

I offer TLC services for a range of consoles, and if you can't find what you want, doesn't mean I can't service your console. Just get in touch! topvint.co.uk/product-cate...

topvint.co.uk

Send-in Services - Topvint

100

Topvint @topvint.co.uk · 26/07/2026

And fans. I'm sure you know which one is for which console right? 😜

120

Topvint @topvint.co.uk · 26/07/2026

Batteries... for a couple of them at least. Good old Sony batteries 😂

120

Topvint @topvint.co.uk · 26/07/2026

Thermal pastes, pads, and so on

120

Topvint @topvint.co.uk · 26/07/2026

Some more dirty than others 😬

120

Topvint @topvint.co.uk · 26/07/2026

Some washing with warm water and soap 💦

120

Topvint @topvint.co.uk · 26/07/2026

TLC galore this past week! I do like a good clean but this is a bit much 😅 More pics below of various parts of the process for the various consoles! 👇

150

Topvint @topvint.co.uk · 02/07/2026

That's the nicest thing anybody has ever told me 😂

010

Reposted by Topvint

Dennis van den Broek @pointerfunction.bsky.social · 30/06/2026

it's finally time to reveal my birthday gift to the community! I present to you the RGR ezBuff. A disc polishing and resurfacing machine, which can restore your scratched discs back to work.

2021174

Topvint @topvint.co.uk · 15/06/2026

No, but is coming for the Sega CD from Japan in my next box 👀

000

Topvint @topvint.co.uk · 14/06/2026

Somehow these are my favourite jobs. I know I'm weird 😅

110