iiinova — where your digital self keeps evolving

I can't emphasize enough that a lacquer base layer and an acrylic chipping layer is necessary for easy, predictable behavior. I hope all of this helps!

000

If you mess up within the first few hours, soak the part in hot water. That will activate all the hairspray and strip the chipping layer off completely, down to the metal. Dry the part off, respray hairspray and your base coat, and try again!

100

With experience you can influence chipping behavior both with how much hairspray is on the part and how long you wait after you lay your chipping layer down. It's worth experimenting with different timings and tools for different effects.

Timing is critical. 30 mins after you lay the paint down, it will be relatively easy to chip paint off in big flakes. The longer you wait, the harder it gets. About 1-2 hours seems to be the sweet spot. After 24 hours, you can only really fine tune it. Past that, it gets near impossible to chip.

4) You can use damp toothpicks, stiff paintbrushes, and q-tips to achieve different effects. Keep some water and a paper towel on hand to control the dampness of your chipping tools. Dry tools won't reactivate the hairspray, but too much moisture and you'll activate it too quickly/uncontrollably.

120

3) Lay down your surface paint color in thin, dry coats, until you just achieve opacity. This layer should be acrylic; ideally an alcohol-based hybrid acrylic like Tamiya or Mr. Hobby Aqueous. These let water pass through them. You need this behavior to reactivate the hairspray.

2) When you are ready to chip, spray hairspray on the part. You want a good medium hold hairspray from either a fine misting aerosol (such as Tresemme Medium Ultra Fine) Even, modest coats. Let it dry. You can spray your next as soon as it's no longer tacky (15-30 mins)

100

I watched and read A LOT of guides and here's the distilled core of what I learned. This will take a few replies: 1) Lay down a lacquer metallic basecoat. A lacquer is VERY important for its durability and water impermeability. This will serve as the layer you chip down into.

200

machine-mind-build.bsky.social @machine-mind-build.bsky.social · 02/12/2024

Love this! There need to be more mecha with Homeworld-inspired paintjobs, it's SUCH a bold, compelling aesthetic. I did one with my Astranova and am looking forward to doing another someday.

000

Reposted by ADARIS

Another from the archives: MG Hyaku Shiki Kai themed after Homeworld (namely the Taiidan Republic from Cataclysm). Did this one for a contest and was rather straightforward since this predated my building doctrine. The turquoise was a nightmare to deal with though. #gunpla #gundam #plamo #homeworld

4266

ADARIS @tempestwrath.bsky.social · 25/11/2024

Thank you so much! The colors and stripes were inspired by the Homeworld videogames' visual design by Rob Cunningham, as well as the classic science fiction art of Chris Foss and Peter Elson. I have several other 30MM kits in my backlog and want to do another like this.

ADARIS @tempestwrath.bsky.social · 24/11/2024

HG Nyuren Desert Type, a customized Nyuren from Kyoukai Senki. My first attempt at a few new techniques, including hairspray chipping. More pics in replies! #ガンプラ #gunpla #plamo #BANDAI #KyoukaiSenki

3289

ADARIS @tempestwrath.bsky.social · 21/11/2024

Those are the waterslides that come with it! They're nearly invisible on the stock MGEX because they want you to put a metallic silver decal on a white part. Wasn't sure if they'd look good in such contrast, but I'm glad I used them.

010

ADARIS @tempestwrath.bsky.social · 21/11/2024

MGEX Strike Freedom (Rising Freedom Colors) More pics in the replies! #ガンプラ #gunpla #gundam #plamo #BANDAI #MGEX

2285

ADARIS @tempestwrath.bsky.social · 20/11/2024

Comparison of my Zeonic Leo display I posted earlier to a stock HG Leo #ガンプラ #gunpla #gundam #plamo #BANDAI

1344

ADARIS @tempestwrath.bsky.social · 20/11/2024

Some closeups of various bits. Hope you enjoy!

060

ADARIS @tempestwrath.bsky.social · 20/11/2024

HG EMS-06Z Leo, a UC interpretation of the iconic Leo from Gundam Wing. The idea was to place this "Zeonic" Leo as the missing link between the Zudah and Gyan, with MSV-style flair! Placed 1st in ZakuAurelius's UC vs AU Contest. More pics in comments! #ガンプラ #gunpla #gundam #plamo #BANDAI

280

Reposted by ADARIS

malleus888.bsky.social @malleus888.bsky.social · 20/11/2024

Bandai Full Mechanics 1/100 Schwalbe Graze from the IBO series. Did this one in a custom lighter colour scheme. I wished I also got the green standard version at the same time, as it's getting harder to find these days. #Bandai #Gunpla #Gundam #Nerdlings

2354

ADARIS @tempestwrath.bsky.social · 19/11/2024

HG Byakuchi Vervain This was a finalist in the ZakuAurelus Advance of Zeta competition last year. The idea here was to apply the AoZ design language to a non-Gundam design. (Though KKS -is- Gundam-Adjacent) More pics in comments! #ガンプラ #gunpla #gundam #kyoukaisenki #plamo #BANDAI

2181

I remember this one from the AoZ contest! Nice work!

100

Or I guess they're called "shield bits" since this is Gundam 00 after all 🙂

000

2/2. Wish I had the smaller funnel stands I have now for when I took the funnel pics, but whatever!

1164