𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 03/10/2026This time I made a reproduction of the door jamb vent flaps. I was able to recreate them in soft rubber to have a nearly identical replacement of the original rubber part. www.tindie.com/products/slb... #supra #a70supra #70スープラ #jza70 #mk3supra 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 03/10/2026I have designed these brackets to be compatible with either the official or reproduction visor for the Supra MK3. Available also on Yahoo Auction Japan. www.tindie.com/products/slb... #supra #a70supra #70スープラ #jza70 #mk3supra 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 17/01/2026The relay for my ZR-7 tail light has arrived, I'll be adding a 1N4007 diode for flyback protection. The use of the diode, and the whole relay actually, is optional. But I want to alleviate the load on my old harness. #taillights #pcb #kawasaki #kawasakizr7 #zr7 #zr750 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 14/01/2026Diffusers for my custom tail light for Kawasaki ZR-7, rev 1.0. I prepared one frost and one milky 2 mm plexiglas sheet for testing, will decide later which one I like more. #taillights #electronics #pcb #diy #tinker #hack #attiny85 #attiny #kawasakizr7 #kawasaki #zr7 #zr750 110
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 13/01/2026Tethering the brain away from the main unit and have it inside the seat storage area instead, so that I can easily replace it for firmware upgrades and testing. #taillights #electronics #pcb #diy #tinker #attiny85 #attiny #kawasakizr7 #kawasaki #zr7 #zr750 110
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 08/01/2026Published some initial content for my custom Kawasaki ZR-7 tail light at: github.com/slabua/zr7-t... - Basic working firmware - Current development #KiCad project #taillights #electronics #pcb #diy #tinker #attiny85 #attiny #kawasakizr7 #kawasaki #zr7 #zr750github.comGitHub - slabua/zr7-taillight: A custom tail light for Kawasaki ZR-7 based on the ATtiny85 and easily extensible to other microcontrollers.A custom tail light for Kawasaki ZR-7 based on the ATtiny85 and easily extensible to other microcontrollers. - slabua/zr7-taillight 100
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 03/01/2026Some pictures of the assembly. Originally, the LM2596 was not part of the design, but for this prototype I decided to add it. PCB manufactured and assembled by @pcbwayofficial.bsky.social #taillights #electronics #pcb #diy #tinker #hack #attiny85 #attiny #kawasakizr7 #kawasaki #zr7 #zr750 111
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 23/12/2025Rev 1.0 of my custom tail light for Kawasaki ZR-7 has arrived and is ready for testing. A huge thanks to @pcbwayofficial.bsky.social for sponsoring this project~ PCBWay also offers CNC and 3D printing services. Be sure to check them out at www.pcbway.com #taillights #pcb #attiny85 #attiny #zr7 131
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 23/11/2025Coming soon #taillights #electronics #pcb #diy #tinker #hack #attiny85 #attiny 110
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 11/11/2025#SLIM2040 now available also on Tindie in limited quantities www.tindie.com/products/slb... ※SLIM2040 is a custom development board based on the the #RP2040 chip.tindie.comSLIM2040 by SLB Labs on TindieSLIM2040 is a custom development board based on the the RP2040 chip. It comes in a slim form factor and some notable additional features. 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 24/09/2025 The data is sent over serial using the Raspberry Pi Pico UART. 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 23/09/2025Another micropython driver, this time for a different VFD. A serial 10-Digits 7-Segs VFD with decimal points and triangles indicators from LGL. Allowed characters that I tested: 0123456789- A C EFGHIJ L OP S U Z bcdefghij l opqrstu yz github.com/slabua/micro... 100
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 08/07/2025Designing DC/DC is no easy task if you have not much experience. Thankfully some datasheet are mind opening. 110
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 01/06/2025Now available also on BOOTH I2C SHIM for Pico slblabs.booth.pm/items/6965719 #booth_pmslblabs.booth.pmI2C SHIM for Pico - SLB Labs - BOOTHI2C SHIM for Pico is a simple way to provide easy access to the I2C bus 0 and 1 on a Raspberry Pi Pico via two Qw/ST connectors. 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 30/05/2025Made an adapter for the D520 thermal printer to accept 12mm core thermal paper rolls. Available on Printables and Thingiverse: www.printables.com/model/131262... www.thingiverse.com/thing:7052263printables.com12mm Core Adapter for D520 Thermal Printer by slabua | Download free STL model | Printables.comSimple set of axle and stoppers to use the more common 12 mm core thermal paper rolls on the… | Download free 3D printable STL models 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 24/05/2025Shipping logistic from home is being sorted out~ As a launch for this board I have been considering manual assembly and Tindie marketplace. Coming soon to other platform such as Elecrow/BOOTH. 100
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 24/05/2025My I2C SHIM for the Raspberry Pi Pico is finally available~ A simple shim board to conveniently break out both I2C interfaces via Qw/ST connectors. Batch manufactured by JLCPCB and assembled manually. Preorder #I2CSHIMForPico at www.tindie.com/products/slb... Repository: github.com/slabua/I2CSH... 160
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 27/04/2025It's Golden Week, the special discount on #SLIM2040 is back until May the 6th~ www.elecrow.com/slim2040.html ・Buy 1 for $14.93 / ¥2434 ・Buy 2+ and save 25% ・Buy 5+ and save 50% Last 30 in stock for this batch. ※SLIM2040 is a custom development board based on the the #RP2040 chip.elecrow.comSLBLabs - SLIM2040SLIM2040 is a custom development board based on the the RP2040 chip. It comes in a slim form factor and some notable additional features. 030
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 07/04/2025Made a quick and dirty python/micropython driver for the BH1750FVI Ambient Light I2C Sensor, since the official wiki page only offers Arduino code. github.com/slabua/BH175...github.comGitHub - slabua/BH1750FVI-python: BH1750FVI Ambient Light I2C Sensor Python and Micropython driversBH1750FVI Ambient Light I2C Sensor Python and Micropython drivers - slabua/BH1750FVI-python 010
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 06/03/2025Doing suspicious stuff forwarding the output of ssh to tty1 🤫 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 27/02/2025Sometimes double side tape is all you need #TM1637 #DS3231 000
Reposted by 𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎KiCad EDA @kicad.org · 20/02/2025KiCad Version 9.0.0 Release The KiCad project is proud to announce the latest major version release. See the blog post on the KiCad website for more information about this release. www.kicad.org/blog/2025/02...kicad.orgVersion 9.0.0 ReleasedThe KiCad project is proud to announce the release of the next major version of KiCad. Version 9 is packed with new features, improvements, and hundreds of bug fixes. We hope you enjoy the new versio... 410040
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 19/02/2025I use Thonny for quick stuff or to directly edit files in the Pico, whilst I always use VS Code when publishing my code, clean and linted. 030
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 19/02/2025Why do I see politics threads on my home feed if I don't follow anything nor anyone involved 🤷♂️ 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 18/02/2025I have used RP2040-Zero with KMK and nice!nano with ZMK firmware. 010
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 17/02/2025My second handwired keyboard #JeegVa44ErgoZero running KMK firmware on a #RP2040 Zero is available here: github.com/slabua/keybo... PCB version in the works~ www.printables.com/model/404303... www.thingiverse.com/thing:5866262 Original thread on Twitter with some updates: x.com/slabua/statu... 020
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 15/02/2025My third handwired keyboard #Saru48WPlus is available here: github.com/slabua/keybo... PCB version in the works~ www.printables.com/model/717305... www.thingiverse.com/thing:6428317 And the original thread on Twitter with some updates over time: x.com/slabua/statu... 020
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 15/02/2025Good to see some 13 columns out there. I had to do the same thing so I could keep my beloved arrows, with a bonus encoder too. 010
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 15/02/2025My RP2040 based development board, #SLIM2040 Rev 2.1, is finally available for order at elecrow.com/slim2040.html SLIM2040 is a custom development board based on the the RP2040 chip. It comes in a slim form factor and some notable additional features. More info at: github.com/slabua/SLIM2... 331
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 13/02/2025I haven't really used this space yet. I think I will cross-post some stuff that I have been making recently, and not so recently. 000
𝚂𝚊𝚕𝚟𝚊𝚝𝚘𝚛𝚎 @slabua.bsky.social · 13/02/2025Quickly made a micropython driver to control a Futaba 4-BT-68ZY VFD. This display is basically only dedicated to work as a clock or timer. The data is sent over serial using the Pico UART. github.com/slabua/micro... 091
