iiinova — where your digital self keeps evolving

PiperMakes @pipermakes.bsky.social · 08/10/2026

Another old kit given a turntable~ The Commander frame is like...5 years old now. And that's too many.

PiperMakes @pipermakes.bsky.social · 08/10/2026

For folks that might be interested in Woundwort things, as it's a very common question I get asked. I still also have to check, but given the general environment, and the estimated cost of the kit, it's very likely that I won't be shipping internationally. At the moment:

0271

PiperMakes @pipermakes.bsky.social · 08/10/2026

And it's all setup so that I can print a stack of the front pages, load it back into the printer in exactly the orientation that it printed out, and then run the back pages. It's all beautifully optimized. XD

1537

PiperMakes @pipermakes.bsky.social · 08/10/2026

What a struggle this has been so far being confined to a limited amount of A4 sheets is frustrating, but with this, the part spread, and the cover pages, it should all be on 4, which should fit into the box with all the other stuff just barely x'D

2383

PiperMakes @pipermakes.bsky.social · 07/10/2026

It eats the transparency I guess xD

0260

PiperMakes @pipermakes.bsky.social · 07/10/2026

I made a larger variant to go along with it and their designation Koma was a direct reference xD

1122

PiperMakes @pipermakes.bsky.social · 07/10/2026

Here's a couple of cool little guys and their butter in the hopes that it can gain me 8 new followers on here because number go up.

733260

PiperMakes @pipermakes.bsky.social · 07/10/2026

Out of the entire assembly, these are the only parts that have a meaningful orientation. And you wouldn't be able to assemble them any of the wrong parts so it's pretty explanatory.

110

PiperMakes @pipermakes.bsky.social · 06/10/2026

It's not really a thing I can model. I'd be more inclined to try this variant of it (the one I like more) but I still don't know how I'd go about it.

110

PiperMakes @pipermakes.bsky.social · 06/10/2026

Removed the previous cause clutter. Parts spread page:

1151

PiperMakes @pipermakes.bsky.social · 06/10/2026

MSPaint or die x'D (I really hope I can fit the buildguide onto 4-5 pieces of A4 paper. (4 Cells per side, 32-40 cells total double sided) But I kinda doubt it x'D)

425644

PiperMakes @pipermakes.bsky.social · 05/10/2026

Dynastecor [DYN] Lancer Variant test print~

221134

PiperMakes @pipermakes.bsky.social · 05/10/2026

Ooo Bandai Models in Creo. That doesn't really matter, but it is cool to know x'D

2455

PiperMakes @pipermakes.bsky.social · 01/10/2026

I got the Box sleeves back today for the packaging, and they look great, but I goofed 'em in a hilarious and mostly un-noticeable way (the best kinda way to fuck something up tbh) She's missing the tip :T

1453

PiperMakes @pipermakes.bsky.social · 01/10/2026

Trnrtable again for wholenesses sake:

0273

PiperMakes @pipermakes.bsky.social · 01/10/2026

Dynastecor [DYN] Lancer Variant VoidFrame:

317139

PiperMakes @pipermakes.bsky.social · 01/10/2026

And that makes five setups~ Despite having so many moving parts to move/get right, these were genuinely pretty fun to pose~ Dynastecor [DYN] Lancer Variant VoidFrame

16512

PiperMakes @pipermakes.bsky.social · 30/09/2026

Sleep now x'D I want to have 3 more poses set up for this one, but I'll get to them tomorrow. Almost done x'D

07615

PiperMakes @pipermakes.bsky.social · 29/09/2026

Just needs a big ol' Zeon shield~

111516

PiperMakes @pipermakes.bsky.social · 27/09/2026

Last turntable setup before I get the main weapons done for them~

338284

PiperMakes @pipermakes.bsky.social · 27/09/2026

Quick Test render of the base [DYN]_Lancer frame with the FM Gar Frame~

011222

PiperMakes @pipermakes.bsky.social · 23/09/2026

If you see this, quote with your Night/ Dark Art! This was a sneaky render I did a while back for the GhostShrimp xD

17311

PiperMakes @pipermakes.bsky.social · 23/09/2026

We do a little tweaking, @tim-popelier.com Need to adjust the body and the rear binder, but I do think it looks quite alright. With a proper pose, and the weapons, I think this'll look pretty rad~ It needs more fitting pauldrons too.

319044

PiperMakes @pipermakes.bsky.social · 23/09/2026

Gonna maybe put a few of the older mechs on the turntable over the next period of time x'D Orca Frame:

444084

PiperMakes @pipermakes.bsky.social · 22/09/2026

Quick turntable render of the [DYN] variant~

526255

PiperMakes @pipermakes.bsky.social · 21/09/2026

The extreme of this: "We have Kshatriya at home." (I'm not gonna do this one, probably. x'D)

2535

PiperMakes @pipermakes.bsky.social · 21/09/2026

More work on this frame with a handful of pieces like the skirt as placeholders till I can model a more fitting version~ But it gives me the good ideas~ "We have Qubeley at home."

418331

PiperMakes @pipermakes.bsky.social · 20/09/2026

However...I was looking through the other garage kits that I have on hand so I can kind of see how they go about their buildguides in comparison to my own, and what I should incorporate for this And one of the ones that I have is just printed on standard printer paper, and then folded into fourths:

150

PiperMakes @pipermakes.bsky.social · 18/09/2026

If you see this, post your green art~

740474

PiperMakes @pipermakes.bsky.social · 18/09/2026

It doesn't matter how many times I put one together, I will*never* get tired of building this head xD Plate A should be good to go on both Printers A & B. I'm going to do one more build with one of the 2 that I've printed so far and see how that feels.

1561

PiperMakes @pipermakes.bsky.social · 17/09/2026

The 1/144 Woundwort kit~ I've been working at setting it up for small run production, that's more or less what all these have been about~

151

PiperMakes @pipermakes.bsky.social · 17/09/2026

Printers A & B's Plate B passes tolerance with a couple part tweaks~ I'll be running Plate A overnight. So far so good~

1260

PiperMakes @pipermakes.bsky.social · 17/09/2026

That's a clean plate B. I just need to get things cleaned up and then confirm that the tolerances are still within spec, and then I can print plate A. And if that's good, then...there's still a lot of stuff left to do x'D BUT this bodes well for right now xD

0310

PiperMakes @pipermakes.bsky.social · 16/09/2026

More work on the main frame of the LanceBoi. Gonna put some huge Nightingale-esque wing thrusters on this one for the back sockets~ I really like this guy~ (I say that all the time, but like, I do xD)

3776

PiperMakes @pipermakes.bsky.social · 15/09/2026

I've got a handful of the various Furher kits (With the second being one of the first kits I actually painted~) and a few others, the kotobukiya HMM kits are a rad time if you can get ahold of 'em~