iiinova — where your digital self keeps evolving

Reposted by Phyx

Solder Party @solder.party · 21/11/2025

Anyone feeling retro? We sure did while working on this cassette tape-inspired case for the KeebDeck Basic! stl files available here: www.printables.com/model/148279...

A photo of a 3d printed case similar to a cassette tape case, but without the reel holder part. The case is standing on its side, open at a 100-ish degree angle, inside is the KeebDeck Basic.

3368

Phyx @phyx.be · 17/11/2025

We released another solder kit, just in time for the Holidays! Happy soldering!

013

Phyx @phyx.be · 08/11/2025

Get yours while stocks last. These keyboards are awesome and hard to beat at that price! If you're building your own product or project with the Keyboard you can look at our implementation for fri3d.be ➡️ fri3dcamp.github.io/badge_2024/c...

061

Reposted by Phyx

arturo182 @arturo182.bsky.social · 24/07/2025

It's been a while since I promoted my own and others' Maker/Electronics Starter Packs! bsky.app/starter-pack... bsky.app/starter-pack... bsky.app/starter-pack... bsky.app/starter-pack... bsky.app/starter-pack... bsky.app/starter-pack... bsky.app/starter-pack...

64519

Phyx @phyx.be · 06/07/2025

For the #FAB25 event in Brno Czechia we created a solder kit with all through hole parts to teach people the basics of soldering. Since the ICs were covering up parts of the logo we opted to laser engrave those chips and paint them. More info 👉 phyx.be/FAB25_BADGE/

010

Reposted by Phyx

Lectronz: The new maker marketplace. @lectronz.com · 19/05/2025

10,000 orders. 150 incredible creators. Thousands of happy customers. One thriving community. Thank you for building this with us. 🙏💛 #10000Orders

1126

Phyx @phyx.be · 07/05/2025

Recently we made a simple, easy to assemble, solder kit for Maker Faire Gent. This was the final part of their maker trail (a quest for the younger visitors). As usual, design files are available 👉 phyx.be

031

Reposted by Phyx

Solder Party @solder.party · 24/03/2025

We have also added our existing Type-C Plug boards to our @lectronz.com store: - 3.7V/4.2V LiPo Charger - CP2102 USB to Serial/UART - USB Type-C Plug Breakout - USB 2.0 Only - USB Type-C Plug Breakout - USB 3.0 Only You can find them all here: lectronz.com/stores/solde...

a photo of four boards. two are simple breakout boards for the USB type-c plug, one has USB 3 pins, the other doesn't. the other two boards are also USB type-c plug ones, but one has a battery charger chip and connector, and the other one has a cp2102 serial chip and footprints for headers.

0175

Reposted by Phyx

Solder Party @solder.party · 24/03/2025

Today we're releasing two new boards 🎉 1. The RP2xxx Stamp Carrier Basic breaks out all the pads to pin headers + USB Type-C and offers the 3-in-1 SMD/TH/FlexyPin Stamp footprint. 2. A FlexyPin Adapter for the Raspberry Pi RM2 module. Get them from our @lectronz.com store: lectronz.solder.party

A photo of two development boards. One is a board with a Stamp footprint and a stamp held down by flexypins. the board has double row pin headers all around the stamp and a USB port. the other board is a simple breakout with the RPi RM2 held by flexypins

3258

Phyx @phyx.be · 25/01/2025

With this new manual it will be easier than ever to get started with your LANA TNY board. Get yours while supplies last. We've "only" made 1000 of these boards.

050

Reposted by Phyx

Wim Van Gool @wimvangool.bsky.social · 13/12/2024

Prototypes for TESS, the @adafruit.com feather compatible board running embedded Linux arrived. Board bringup time this weekend! 🥳

1162

Reposted by Phyx

arturo182 @arturo182.bsky.social · 19/12/2024

Fits fanTESStickly 🪶🪽

A photo of a pcb on a lavender cutting matt. The PCB has two slots for Feather boards. One slot is taken by the Tess board. There is also a flex cable sneaking in from the other side of the board and into a fpc connector. There is an on/off switch. There's a part of a microSD connector, there are two Qwiic connectors, one facing outwards and one facing inwards. There's also a part of a QFP chip visible. And lastly there are 8 test points marked with IO0-IO7 and "GPIO Expander" next to them.

3346

Phyx @phyx.be · 22/11/2024

Black friday, Cyber Monday, whatever the occasion, perfect moment to offer shoppers some discount on our product over at @lectronz.com get your stocking stuffers now in time for the holiday craze! lectronz.com/stores/phyx (valid until I run out of stock)

Screenshot of the Lectronz.com marketplace showing the Phyx solderkits being 20% discounted while stocks last

021

Phyx @phyx.be · 20/10/2024

Recently we've been working on an open source Flarm warning light for gliders. The challenges in this design were the board size, single layer design and high power LEDs in a light weight solution.

010