iiinova — where your digital self keeps evolving

LimeyBuilds @limeybuilds.bsky.social · 01/10/2026

3 years ago! First foray into leather for this Seven-of-Nine build. www.facebook.com/media/set?va...

030

LimeyBuilds @limeybuilds.bsky.social · 11/09/2026

Quick Cyberpunk 2077 motion-I.D. badge I put together for my custom M-10 holster pics. youtu.be/kh5nM-ZqLuM

youtu.be

Cyberpunk2077 Video I.D. Lanyard.

YouTube video by LimeyBuilds

010

LimeyBuilds @limeybuilds.bsky.social · 09/09/2026

Album for my Militech-inspired M-10 holster for Cyberpunk 2077. www.facebook.com/media/set/?s...

031

LimeyBuilds @limeybuilds.bsky.social · 08/09/2026

Just HAD to build a holster for the Militech M-10 Lexington! NCPD Detective reporting for duty. youtu.be/ZFTnCEuH3jU #cyberpunk2077

youtu.be

I Built a Holster for my Militech M-10AF

YouTube video by LimeyBuilds

010

LimeyBuilds @limeybuilds.bsky.social · 03/09/2026

First Cyberpunk 2077 Game-to-Reality build complete! My 3D modelled & printed Militech M-10AF Lexington. This is an in-game NCPD standard issue firearm. Decided to keep the finish clean on this one as I wanted to build this as an active police service weapon.

1285

LimeyBuilds @limeybuilds.bsky.social · 20/08/2026

This was meant to be a rainy-day kit, but I like it too much! Working on the M-10F Lexington, and the chromy parts create too much contrast with the rest for my liking. Gonna try a darker silver I think.

020

LimeyBuilds @limeybuilds.bsky.social · 13/08/2026

Just added some Lanyards and leather holders to the LAPD Blade Runner badges!

021

LimeyBuilds @limeybuilds.bsky.social · 26/07/2026

Figuring out the grip on this'll be challenging.

131

LimeyBuilds @limeybuilds.bsky.social · 21/07/2026

A little printable from Cyberpunk 2077 complete: The Health Inhaler (with magnetic removable cartridges and allowance for lighting)

020

LimeyBuilds @limeybuilds.bsky.social · 06/07/2026

Not usually one for realistic looking firearms, but there's something about Cyberpunk 2077 game designs that I want to hold their gear for real. Haven't seen a fully accurate version out there, so decided to model a MILITECH M-10AF Lexington 'Vindicator' in high detail. One of my faves.

141

LimeyBuilds @limeybuilds.bsky.social · 22/06/2026

Just working on a printable custom modded Star Wars: Outlaws TL-50

191

LimeyBuilds @limeybuilds.bsky.social · 19/06/2026

My hand-made, hand-sewn, Josh Faraday-inspired Wild West leather belt w/ Henry rimfires ammo loops. Shown with a 12-gauge ammo slide, Red Dead Online style knife sheath, Slim Jim holster for an 1860 Colt Army, and a custom Wild Hats sharpshooter hat. Such a satisfying build!

010

LimeyBuilds @limeybuilds.bsky.social · 18/06/2026

My rendition of the Techtronika Metel from the Cyberpunk 2077!

010

LimeyBuilds @limeybuilds.bsky.social · 18/06/2026

Techtronika Metel idle animation mechanism test - Cyberpunk 2077! youtu.be/lnFrB9mtUYU

youtu.be

Cyberpunk Techronika Metel Mechanism Test

YouTube video by LimeyBuilds

010

LimeyBuilds @limeybuilds.bsky.social · 06/06/2026

Work-in-Progress: Cyberpunk 2077 Rostović DB-2 Testera, fully detailed!

011

LimeyBuilds @limeybuilds.bsky.social · 02/06/2026

Couple of Bounty Fob commissions completed, and a couple extra added to the shop! youtu.be/bs9XDbWF_4U

000

LimeyBuilds @limeybuilds.bsky.social · 26/05/2026

Latest video game build complete! It's El Muro form FAR CRY 6.

020

LimeyBuilds @limeybuilds.bsky.social · 08/05/2026

Had the sudden inclination today to see what a DL-44/Combustion Blaster combo would look like.

030

LimeyBuilds @limeybuilds.bsky.social · 07/05/2026

Latest 3D-printable: 32nd Century Breen Polaron Rifle.

000

LimeyBuilds @limeybuilds.bsky.social · 06/05/2026

Just completed this Bacta Vial health top-up from Star Wars: Outlaws! modelled, printed, and finished with lighting.

030

LimeyBuilds @limeybuilds.bsky.social · 05/05/2026

Updated and released: 3D printable Bel's Blaster from the Doctor Who 'Flux' arc. In the show she has a twin set with scopes on either side. This STL set includes Left and Right options, as well as a no-scope version.

020

LimeyBuilds @limeybuilds.bsky.social · 04/05/2026

Also did the Discovery version of the holster. Fits my remodelled 3DTech Disco phaser, and therefore both will fit. Uses same fittings as the SNW one. FULL ALBUM: www.facebook.com/media/set/?s...

020

LimeyBuilds @limeybuilds.bsky.social · 30/04/2026

Something I finished up at the back end of last year. Managed to find the buckle style used on the show to get this SNW holster done. SHORT VID: youtu.be/Ibk_Zh-UIbo FULL ALBUM: www.facebook.com/media/set/?v...

youtu.be

Strange New Phaser Holster

YouTube video by LimeyBuilds

030

LimeyBuilds @limeybuilds.bsky.social · 28/04/2026

Moll's 32nd Century Phaser print model just completed. #cosplay #startrek #prop #replica

0112

LimeyBuilds @limeybuilds.bsky.social · 27/04/2026

Star Wars: Jedi Survivor Combustion Blaster 3D print model. This's one that I printed out and boxed up for a rainy-day project. Did the trigger in Tough Resin, just to be safe.

030

LimeyBuilds @limeybuilds.bsky.social · 24/04/2026

My finished 3D printable Booker Phaser from Star Trek: Discovery.

0111

LimeyBuilds @limeybuilds.bsky.social · 23/04/2026

Hot off the print bed: Booker's 32nd Century phaser with lighting. www.facebook.com/media/set/?s...

0223

LimeyBuilds @limeybuilds.bsky.social · 22/04/2026

New model just polished off: L'ak's Season 5 Star Trek: Discovery 32c Phaser. #StarTrek #3DPrinting #Prop #Replica #Cosplay

0161

LimeyBuilds @limeybuilds.bsky.social · 13/04/2026

10 years in the modelling... Realised today I can probably 3D model an accurate Kelvin Klingon helmet, as I wanted to do in 2017 when I made the hideous attempt in wet clay. Followed soon by Monster Clay, promptly forgot, and left unfinished for almost a decade. We'll see how we go this time!

051

LimeyBuilds @limeybuilds.bsky.social · 09/04/2026

Just added some groovy new additions to the STO Assault Rifle files. Having been commissioned to add MACO-style parts to beef it up, It now has 4 possible variations! 1. Star Trek Online standard. 2. With added Fore Grip. 3. With added Stock. 4. The Full MACOver (with Fore-Grip & Stock).

181

LimeyBuilds @limeybuilds.bsky.social · 08/04/2026

More Star Wars-inspired Datapad:

130

LimeyBuilds @limeybuilds.bsky.social · 08/04/2026

Just finished up this custom job: Star Wars-inspired Datapad cover for an old iPad Mini. youtu.be/NE68-CE5FqA

youtu.be

Star Wars Style custom Datapad

YouTube video by LimeyBuilds

030

LimeyBuilds @limeybuilds.bsky.social · 07/04/2026

Taken me far too long to get around to finishing the grip on this, but my bajoran hand phaser is finally done and STLs up!

1264

LimeyBuilds @limeybuilds.bsky.social · 06/04/2026

New printable just finished up: Picard Changeling Phaser.

030

LimeyBuilds @limeybuilds.bsky.social · 01/04/2026

Got around to taking pics of this at long last! From Borderlands 2: Krieg's 'Turn Around Do It' mask, recreated as faithfully as possible, and with the glowy eyes. Real leather straps. FULL ALBUM: www.facebook.com/media/set?va...

010

LimeyBuilds @limeybuilds.bsky.social · 23/03/2026

Dayum, this was a challenge and a half. Still need to break it up into printable parts, and these pics probably still have random coloured internal bits popping out here and there, but I'm calling it done. Phew.

130

LimeyBuilds @limeybuilds.bsky.social · 18/03/2026

Sometimes you approach a 3D model thinking; 'This looks pretty straight forward.' Hahaha. Hahahahahahahahahahahahahaha. Haha. Ha. ... Hmm.

061

LimeyBuilds @limeybuilds.bsky.social · 16/03/2026

Added the hollowed-out-for-electronics version of The Orville shotgun PM-488!

000

LimeyBuilds @limeybuilds.bsky.social · 15/03/2026

So, I never actually planned to do the PM-44 from The Orville. As it turns out, though, the PM-488 is built off of the PM-44. So, I had to first do the pistol in order to build the shotgun. So, basically, another set of STL files added!

062

LimeyBuilds @limeybuilds.bsky.social · 14/03/2026

My first foray into The Orville props! So pleased with how this one came out. The PM-488 Titan Plasma Shotgun. So far only the solid filament non-electronics version is up, but will be working on a hollow version next! #prop #replica #cosplay

051

LimeyBuilds @limeybuilds.bsky.social · 18/02/2026

Well. I think, If I'd known in advance how much work this one would take I might not have ever started it! Georgiou's Derringer Phaser pistol from Star Trek: Section 31, STL files.