iiinova — where your digital self keeps evolving

Mark van der Velden @dynom.nl · 22/09/2026

Onjuist, stond weldegelijk op de voorpagina, zaterdag rond 18:00.

Mark van der Velden @dynom.nl · 01/05/2026

Dus als ik jou goed begrijp dan pakt de elektriciteitsmeter de som van Ln en indien het resultaat negatief is wordt het bij de export teller opgeteld en anders import?

100

Mark van der Velden @dynom.nl · 20/01/2026

Daar hebben we het heel vaak over, elk jaar opnieuw, vooral zo rond de kerst. Maar de laatste tijd hoor ik vooral dat jonge meiden in het nieuws. Opwaartse trends zijn nieuwswaardiger denk ik. www.cbs.nl/nl-nl/nieuws...

000

Mark van der Velden @dynom.nl · 18/01/2026

Not the most flattering position, but hey.

100

Mark van der Velden @dynom.nl · 18/01/2026

PLA works fine for me. So does PETG. Figuring out the tolerances (X/Y slice parameters).

Small figurine with human-like joints in two colours. One hand pointing at the camera and the other raised in the air. Standing, without supports, on its own two feet

110

Mark van der Velden @dynom.nl · 22/12/2025

I like these SN74AHCT125N, for the fast stuff, single digit ns switching speed. www.ti.com/document-vie...

Showing a SN74AHCT125N TTL gate PDIP sized

010

Mark van der Velden @dynom.nl · 18/11/2025

Yeah.. I had a similar challenge 1.5 by 4 meters.

Three letters spelled WHY, made out of 20x20 cm light boxes each with their own colour

110

Mark van der Velden @dynom.nl · 26/10/2025

@bsky.app why do I have to login so darn often? This is starting to become my most visited view of this app

010

Mark van der Velden @dynom.nl · 01/10/2025

But.. but.. I like my beard 😭

Bearded man with pink eyewear, looking to his left

010

Mark van der Velden @dynom.nl · 09/08/2025

#WHY! Dew drops on and in everything 😬

010

Mark van der Velden @dynom.nl · 03/08/2025

Really.. it fits well! Also: Not the recommended way of playing with the badge! You can play Doom on it, I would recommend that over doing this. #WHY2025 #Badge

020

Mark van der Velden @dynom.nl · 03/08/2025

I've gotten the question a few times now. Yes, the USB-c ports are a great fit. a Length of 6.5 mm is required for a *good* fit and most USB-c plugs are longer than that.

$usbc plug shown plugged in, with a fraction of space in between.$

100

Mark van der Velden @dynom.nl · 02/08/2025

Photos and instructions are on the Printables page. Both vertical and diagonal works. Diagonal is (arguably) the nicest finish and strength, but takes up a lot of real-estate. www.printables.com/model/137231...

000

Mark van der Velden @dynom.nl · 01/08/2025

Second to last dimensions check for the #WHY #Badge Cover. Fusion file and STL will be made available soon, a slightly earlier version is available at gitlab.com/Dynom/hardwa... Also checkout the model of @davedarko.bsky.social at www.printables.com/model/136919... Only 7 days until #why2025!

372

Mark van der Velden @dynom.nl · 29/07/2025

(could've been one post, miss-clicked) I've orientated it at a 40° angle, this saves 65% material in supports. I've brought it down to 8 gram of filament for supports.

Back panel for the badge. Two bulges to cover the 18650's.

Showing a 35° angle cover with organic supports on a build plate of a 3d printer

010

Mark van der Velden @dynom.nl · 28/07/2025

Pretty happy how these #lithophane light boxes came out. Managed to find a decent production flow in the end as well. Well in time before #why2025

030

Mark van der Velden @dynom.nl · 12/07/2025

The final preparations are starting. #why2025

000

Mark van der Velden @dynom.nl · 12/06/2025

First batch done. The #WHY2025 colours are completely coincidental 🫣

020

Mark van der Velden @dynom.nl · 11/06/2025

Diffuser design is ready, for the new "pixel boxes" Should probably think of a better name 🤔

100

Mark van der Velden @dynom.nl · 01/06/2025

Klankroes 🕺 @ Cafe Kanaalzicht

Man with a beard, wearing klankroes.nl shades.

010

Mark van der Velden @dynom.nl · 11/05/2025

Mijn weekend was ook vermoeiend, maar wel heel anders!

010

Mark van der Velden @dynom.nl · 10/05/2025

I'm getting royally pissed with the OpenADR alliance. It claim to be an "Open" specification, but so far there is nothing open about it. It's all behind a signup form and payment options (to get certified, test or participate). This is one way to get more specifications (XKCD 927).

The options to address the person signing up is either Ms. or Mr.

000

Mark van der Velden @dynom.nl · 10/05/2025

"My car is road safe, because it has seatbelts and an alarm system"

Text that reads: How is cyber security supported by OpenADR? -- OpenADR 2.0 supports ECC and RSA server and client certificates with TLS and XML wrapping functionalities.

210

Mark van der Velden @dynom.nl · 14/04/2025

I'm no artist.. but: magic ✨🌈

010

Mark van der Velden @dynom.nl · 12/04/2025

I've been using it for a while. It's fine and very portable. I don't use it for smd work, but with a decent adapter (60+W) it's a capable soldering iron.

000

Mark van der Velden @dynom.nl · 05/04/2025

This was a great morning. After a game of chess, we tried to figure out why the bell rang when we flipped the switch.

A chess board and some electrical STEM education components.

000

Mark van der Velden @dynom.nl · 24/03/2025

Grondig, dat ze die vertrekpassages testen op zeer gevoelige huid.

000

Mark van der Velden @dynom.nl · 28/02/2025

Cool feature of #Android, however I do think it's unfortunate that this can't be blocked as a user permission.

000

Mark van der Velden @dynom.nl · 19/01/2025

I'm missing a way to limit results to a certain time. "Anything of the last .." or along those lines.

100

Mark van der Velden @dynom.nl · 13/01/2025

Made a model yesterday. I Still need to solve some scripting issues, but maybe I get it usefully parameterised once I figure those out. I don't know the word for thing I made, has something to do with the shedding of the stock of threads. Who knows the name of it? makerworld.com/en/models/98...

loom shedding thingy. It raises the top and lowers the lower warp threads to create space for the shuttle/insert, and switches when rotated the other way.

000

Mark van der Velden @dynom.nl · 14/12/2024

Running various flow percentages to test ironing, it's easily something that can improve on the default.

Flow percentage range of 10-60% flow rate changes, of a 3D printed piece of PETG

030

Mark van der Velden @dynom.nl · 06/12/2024

Always the exciting final moments when printing a bit more complicated models (round base) with Nylon (PA-CF)

030

Mark van der Velden @dynom.nl · 05/12/2024

I want to use magnetic "pogo" connectors, i haven't found any nice ones yet. I think magnetic might work.

000

Mark van der Velden @dynom.nl · 05/12/2024

I still want to build something like this.

110

Mark van der Velden @dynom.nl · 05/12/2024

Oh, PEBCAk... This is one with addressable leds, with an ESP32C3 running wled

110

Mark van der Velden @dynom.nl · 05/12/2024

I make all kinds of lamps, including this one, very basic, but can't upload a video for some reason..

110

Mark van der Velden @dynom.nl · 04/12/2024

Tickets for #why2025 are in. Now the village stress begins! The #earlybird tickets are selling out fast! tickets.why2025.org

010

Mark van der Velden @dynom.nl · 26/11/2024

A bit of a tacky name perhaps. But #squirt is a nice bicycle chain lubricant.

000

Mark van der Velden @dynom.nl · 16/11/2024

Tried to fix this Fisher-Price tape player. Still not at the quality it once was, but were getting there. Thanks #RepairCafe for the old-skool knowledge 🤘

A brown fisher-price portable tape player, and some repair tools left of it. The deck is over 35 years old and still works, after some TLC

010

Mark van der Velden @dynom.nl · 15/11/2024

Ooh dear. Bsky is starting to crumble..

Notifications tab not loading any content

000