iiinova — where your digital self keeps evolving

Delta Regeer @digitalresistor.net · 26/08/2026

My #pride flag was stolen from my porch. Kiddo shoulda just knocked, I’d have given him a pride flag so he too could show the world who he really is, and he wouldn’t need to steal one.

350

Delta Regeer @digitalresistor.net · 27/06/2026

This is my license plate frame design, I was told by many people * that PETG would never last and it would melt and bend and not look like a license plate cover anymore and I should print it out of ASA and that PETG would not work at all.

Picture of a license plate frame laying on top of my car after being installed on my car for a little over a year.

Another picture of the same license plate frame sitting up against the rear window of my car. It’s got some slightly discolored holes from rust from the screws.

130

Delta Regeer @digitalresistor.net · 27/01/2026

Here’s just one of my 7 3D printers, state of the art Bambulab H2C. And some pictures of my filament stash… 😂

A shelf floor to ceiling with stacks and stacks of filament.

A shelf floor to ceiling with stacks and stacks of filament. Showing two shelves filled with filament.

Rolling rack/shelf of filament with about 30kg of filament sitting on it.

An Bambulab H2C with three AMS systems loaded with filament (12 kg total) and a AMS HT system loaded with 1 kg.

Some tubs on a wire rack also filled with filament.

121

Delta Regeer @digitalresistor.net · 14/01/2026

The call it “refresh your feed”

000

Delta Regeer @digitalresistor.net · 03/01/2026

A very humble, simple, and delicious meal. Nasi Goreng with crispy tofu in a ginger garlic sauce with cucumber on the side. Dutch-Indonesian style. Filled with amazing veggies and spices with rice.

Nasi Goreng plated with tofu, bean sprouts and cucumber on top!

060

Delta Regeer @digitalresistor.net · 01/01/2026

Gochujang kimchi burger with lettuce and tomato on sourdough with Chinese spicy mustard.

A plate that has sourdough bread on it, the top piece of sourdough has tomato and lettuce on it, the bottom has the burger. Next to the plate are a fork and a knife on top of a placemat.

040

Delta Regeer @digitalresistor.net · 25/12/2025

Merry Chrimbo to you all! It’s 60F in the mountains of Colorado and I was topless because this weather is weird as hell! #trans #transfemme #transnonbinary

Delta smiling into the camera holding out their arm showing the gorgeous mountain scenery behind them.

Delta lounging on sunning chair on a deck smiling at the camera.

030

Delta Regeer @digitalresistor.net · 25/12/2025

Bite mark left by my gf is fading fast :-(

Picture of Deltas neck showing the bruise from a bite mark.

020

Delta Regeer @digitalresistor.net · 27/11/2025

You've just died. The 6th picture in your phone gallery is what killed you.

050

Delta Regeer @digitalresistor.net · 11/11/2025

"uhh what do you got going on here?” I am wearing my collar and the TSA agent looked so confused and with horror at it… he then treated it like a toxic object after he asked me to take it off so it could get scanned. My girlfriend who was behind me, and I are laughing our asses off about it.

Selfie of Delta with a n95 mask on showing their collar with dog tag on it stating their name.

150

Delta Regeer @digitalresistor.net · 06/11/2025

Great... just soooo great. Fingers crossed my flight out to Seattle tomorrow is not cancelled, or that I don't get stuck in Seattle (although, that'd be with my girlfriend, so it wouldn't be all bad...)

The Federal Aviation Administration (FAA) and Department of Transportation (DOT) recently directed every airline to reduce their schedules across 40 U.S. airports during the government shutdown.

The FAA's goal is to relieve pressure on the aviation system so that every airline can continue to operate safely. That is the FAA's highest priority, and ours as well. No matter what environment we're operating in, United Airlines will not compromise on safety.

Our flight reductions will start on Friday, November 7, and we'll make rolling updates to our schedule as the government shutdown continues. United's long-haul international flying will not be affected, nor will service between our hub airports: Chicago O'Hare, Denver, Houston, Los Angeles, Newark Liberty International, San Francisco and Washington Dulles.

If your flight is canceled, we'll work to give you as much notice as possible, so you don't show up at the airport expecting to fly. But the best way to stay up to date is through our award-winning United app, which gives you real-time updates, rebooking options and more.

Importantly, if you're traveling during this period and do not wish to fly, you're eligible for a refund — even if your flight isn't impacted. That includes non-refundable tickets and basic economy tickets.

Even with these schedule reductions, we expect to offer about 4,000 flights per day. And because of the early November timing, our flights have more available seats than before the summer, giving us (and you) more rebooking options.

Thank you in advance for your patience. We've got the best team in the industry looking after your trip and we'll continue to be open, direct and transparent with you throughout your journey.

Sincerely,

Scott

Scott Kirby
CEO
United Airlines

120

Delta Regeer @digitalresistor.net · 05/09/2025

Lemme quickly pop into Autodesk Fusion and whip up a box to hold a relay, then 3D print to test to fitment! I love having a 3D printer and being able to quickly iterate on designs. This is not anywhere near done yet, got the basic board size down to check sizing before finishing the rest!

Top-down shot of a relay board sitting on top of a plastic housing with two screws holding it in place.

Screenshot of Autodesk Fusion showing the relay board itself with the plastic casing that is being designed underneath it.

130

Delta Regeer @digitalresistor.net · 26/08/2025

Prusa joining the race... I like this, I like this a lot as a consumer. The Snapmaker U1, Bambulab H2C, Prusa CoreOne, Prusa XL (one of the OG's), the open source designs, the Bondtech IDX system. This is FUN! 3D printing getting an upgrade!

160

Delta Regeer @digitalresistor.net · 04/08/2025

I may have a tiny itsy bitsy problem… I am at 174 kg of unprinted plastics, 35 kg is engineering filaments. Look, gotta have some variety available while 3d printing…

Delta holding a round disc that is designed to look like the side of a filament spool with text on the outside reading “filaholics anonymous”. The inside circle has a relief of the iconic AA unofficial coins and the text “to thine own self be true” with the triangle with text on the left side reading “unity”, right side “service”, and bottom being “recovery”, the text in the triangle is “24 hours”

020

Delta Regeer @digitalresistor.net · 02/08/2025

3D printing can still surprise me. Flow rate and pressure advance were tuned for the white filament, yet it seems to have failed badly on the first two layers.

Multiple coin sized 3d prints, most are face down, except for one. The face down ones are showing an issue with the print where plastic was not properly extruded.

130

Delta Regeer @digitalresistor.net · 06/07/2025

I would not recommend getting a TBI, but if you do, and get an MRI, make sure to request the dicom files on a DVD… so you can 3D print your own brain as a full size model! With thanks to brain2print.org for making it relatively painless!

Delta holding up a 3D printed version of their brain while smiling at the camera.

Top down view of Deltas 3D printed brain.

0264

Delta Regeer @digitalresistor.net · 11/06/2025

Order tracking in Wallet has existed for a while. Shops that opt in to it… it’s great! I want more places to use it.

000

Delta Regeer @digitalresistor.net · 08/06/2025

I’m not saying I’m cute… but I feel really cute!

Delta laying on their bed in a cute pink bra and underwear that has an arrow buttons and what looks like paws for joysticks, with gamer written on the black band underneath their breasts.

Their panties have a game controller on them.

150

Delta Regeer @digitalresistor.net · 08/06/2025

Posted my US Car License Plate Frame on #MakerWorld: makerworld.com/en/models/14... So if you have a #3dprinter and want to create your own license plate frame, you can go grab my model/slicer configuration and print yourself a license plate frame with some custom text!

021

Delta Regeer @digitalresistor.net · 04/06/2025

A slightly more naughty license plate frame #3dprinting

3D printed license plate frame that says “if you are this close…” at the top and at the bottom says “pull my hair”

040

Delta Regeer @digitalresistor.net · 03/06/2025

Finished the design for these custom license plate frames, and got them 3d printed and affixed to my car! Yes, I’m a stereotype, I drive a Subaru, WRX mind you, 6 speed manual! #3dprinting #subaru #wrx

Picture of Deltas new license plate frames installed on their car, the top of the frame says “nonbinary” and the bottom part says “Hacker”

Picture of Deltas new license plate frames installed on their car, the top of the frame says “>_<” and the bottom part says “Subuwu”. It’s mounted on the front of their Subaru WRX.

260

Delta Regeer @digitalresistor.net · 01/06/2025

Pocari Sweat is the sweat from the Pocari animal, they over hydrate the animals then stuff them in hot rooms and collect their sweat.

A picture of Delta holding up a bottle of Pocari Sweat, while smiling at the camera.

040

Delta Regeer @digitalresistor.net · 27/05/2025

Rite Aid has an entire aisle for pegging toys!

At a Rite Aid (pharmacy/grocery store) signs hang over the aisles specifying what is in that aisle. On the left it says “peg toys” and on the right “notebooks” and underneath another sign with “pens and pencils”.

At a Rite Aid (pharmacy/grocery store) signs hang over the aisles specifying what is in that aisle. This with says “peg toys”.

120

Delta Regeer @digitalresistor.net · 18/05/2025

I don’t want to get out of bed!

Delta smiling at the camera with their head on a hello kitty pillow, arm underneath their boobs.

030

Delta Regeer @digitalresistor.net · 16/05/2025

Sound on… holy shit this is satisfying.

010

Delta Regeer @digitalresistor.net · 16/05/2025

End result… it came out absolutely amazing. Gotta spray on a matte clear topcoat to seal in the carbon fiber, cause I like my skin the way it is. This is PA6-CF #3DPrinting

3D printed owl statue sitting on a 3D printer build plate.

130

Delta Regeer @digitalresistor.net · 16/05/2025

Someone on a Facebook group (which I am now banned from, 🤣) claimed that you cannot print PA6-CF (Nylon 6 with carbon fiber filler) on a Flashforge AD5M. I off course had to prove them wrong, so here a picture. Nozzle temp: 280C (max) Bed temp: 100C Filament dryer: 70C #3dprinting

A picture of a 3D printer sitting on a counter with a filament dryer next to it. It is actively printing an object.

130

Delta Regeer @digitalresistor.net · 07/05/2025

3D printing my own #BDSM toys. Yes, I am a huge #masochist, why do you ask? Printed in PLA, when they break I’ll print them again in PETG for extra impact resistance!

Two paddles with what looks like embedded Lego pieces in the flat end, 3D printed in pink and yellow.

Two paddles with what looks like embedded Lego pieces in the flat end, 3D printed in pink and yellow. One of the paddles has the word “BRAT” embossed into the bottom of it in big letters.

071

Delta Regeer @digitalresistor.net · 01/05/2025

I took a little nap during my tattoo session today because I am a good little pain slut and it was just so comfortable and lovely.

Deltas right arm is extended out, someone holding a tattoo machine in gloved hands is tattooing a line on deltas arm.

230

Delta Regeer @digitalresistor.net · 29/04/2025

Yeah… no thank you. 🙂‍↔️ There are literally so many projects I have no desire to start now because supplies are too expensive. Even hardware components from McMaster Carr are priced out due to tariffs on aluminum and steel.

An image showing a checkout screen for AliExpress where a single board computer worth $149.93 has import charges of $142.43 added to it.

050

Delta Regeer @digitalresistor.net · 24/04/2025

A kid ran up to my backpack, tried to to grab the gold dragon and and started yelling “mine mine mine”. The kids dad instead of removing the kid suggested I give it to the kid. Apparently I’m the asshole for suggesting he could give me $100 for it.

A 3D printed articulated dragon hung from the strap on my backpack. It’s approximately 5 inches in length.

A picture of two articulated 3D printed dragons. One in red hanging from my purse. The other hanging from my backpack.

2100

Delta Regeer @digitalresistor.net · 19/04/2025

Getting flogged and whipped in #Portland at #Kinkfest is doing some really wonderful things for my mental health. Especially when the tops are like “oh, you are such a fun little masochist to play with”

A close up of Deltas nipple showing whip marks.

Deltas chest and breasts showing whip marks scattered all over while they are smiling.

Deltas back covered in marks from being flogged and whipped.

020

Delta Regeer @digitalresistor.net · 07/04/2025

Anyone that knows what this necklace is… is at least as depraved as I am.

Delta wearing an unassuming necklace with a silver oblong item on the end. It’s a necklace from Crave known as the Vesper, and it’s also a small but unassuming vibrator.

050

Delta Regeer @digitalresistor.net · 07/04/2025

Uhhhhh, vanguard, the math ain’t mathing. Pretty sure negative returns over the entire period of my 401k existing is not 9% gain.

Screenshot from Vanguard 401k showing a performance return of -1,693.92 yet it shows that this is up 9%

030

Delta Regeer @digitalresistor.net · 29/03/2025

Think I finally got the parameters right for this PETG. Key tip seems to be: slow your printing speeds way down.

Top down view of a lamp shade for an LED puck printed in clear PETG.

Side view of a lamp shade for an LED puck printed in clear PETG.

Top view of a lamp shade for an LED puck printed in clear PETG showing minor imperfections.

3241

Delta Regeer @digitalresistor.net · 26/03/2025

Labs were taken an hour before my next shot. Blood draw was January 15, results posted on the 20th. Last IM shot was done April 8th, .5 mL from 10 mg/mL EC. Went up to 6 mg on February 5th after discussion with my doctor.