iiinova — where your digital self keeps evolving

Canuck Creator @canuckcreator.bsky.social · 23/08/2026

Even though its supposed to be a "rest" day, really wanted to try out the new shoes so did a quick 2mile run in em, ya night and day difference, they feel SOOO much nice on the feet

080 0

Canuck Creator @canuckcreator.bsky.social · 19/08/2026

I think I understand this "runners high" thing I haven't ran a non stop 5k in over a decade and after Sundays attempt. Focused on keeping a steady, attainable pace. And was able to pull off a sub 40min 5k time. Heck ya

1110 0

Canuck Creator @canuckcreator.bsky.social · 24/06/2026

NEW VIDEO! 3D printing is a cool fun hobby, but it can be even more cool and fun when combined with another hobby or use as a tool to make stuff for even larger projects So what happens when you combine a 3d printed mesh form and concrete? Find out todays video! youtu.be/5-MITvAVOxk

093 0

Canuck Creator @canuckcreator.bsky.social · 15/06/2026

Been working on making a Deku Tree planter, using a 3d printed mesh as the form, used as the base form replacing a wire mesh, impregnating it with concrete mortar, and put the final parge coat on today, next comes painting and sealing

2130 0

Canuck Creator @canuckcreator.bsky.social · 11/03/2026

So ive got a zimaboard 2 that they send over, going to be doing some klipper shennanigans with it, but also picked up a 60$ tesla p4, not quite sure what im going to do with it outside of some LLM faffin about, any other suggestions?

1120 0

Canuck Creator @canuckcreator.bsky.social · 01/01/2026

Some room for improvement thats for sure, while the coveralls with velcro/clips hold everything in place now pretty well vs the old rig i tried last year, going to have to remove some stuff around the knee joins, too limiting in movement and too much rubbing. So dremel time!

070 0

Canuck Creator @canuckcreator.bsky.social · 01/01/2026

Goal on the channel this year is to finish the projects that have been sidelined/on hiatus And that starts with the Fallout T45 Power armor build, got the lower body parts rigged up to the new undersuit and did a walk test around the basement #cosplay #Fallout #3DPrinting

1180 0

Canuck Creator @canuckcreator.bsky.social · 30/12/2025

Its time for the LAST youtube stream of 2025 and today we are featuring YOU! Going over your favorite 3d prints and projects submitted to the discord and also chatting about plans for the next year on the channel. Going live at 2:30pm EST, dont miss out its gonna be fun! youtube.com/live/4rr40Pp...

060 0

Canuck Creator @canuckcreator.bsky.social · 28/12/2025

REALLY happy how well this turned out, Shroud from #DispatchGame mask printed on the @prusa3d.com C1L in some @polymaker.bsky.social PET-CF17, taped in some eye mesh for a quick test fit and threw on a hoodie for a pic, this is gonna look great once painted w/ LEDs

081 0

Canuck Creator @canuckcreator.bsky.social · 22/12/2025

Got around to getting the Ez8 Decal`d up, also learned im not a fan of dry transfer stickers lol Need to get my hands on some panel line markers still.

1100 0

Canuck Creator @canuckcreator.bsky.social · 21/12/2025

Sunday afternoon twitch stream? Sure why not! Carrying on with the GQuuuuuuX kit build, come hang out and join the fun! ! www.twitch.tv/nero3d

080 0

Canuck Creator @canuckcreator.bsky.social · 18/12/2025

GQUUUUUXin it up, building some gunpla on twitch! Come hang out and join the fun! www.twitch.tv/nero3d

080 0

Canuck Creator @canuckcreator.bsky.social · 28/11/2025

beep boop the nice thing about big printers, less seams to clean up in post processing, the entire body and dome of this astromech is only 4 big prints still got tons to go though, legs, greeblies and other stuff, back to it

3170 0

Canuck Creator @canuckcreator.bsky.social · 23/11/2025

not the most elegant solution, but it works and i had the stuff on hand already. LED lights and back panel installed with a bowden slot on the ventureXL Waiting on Insulation panels to come in for the top and sides Cheers to all who joined the stream this evening!

080 0

Canuck Creator @canuckcreator.bsky.social · 19/11/2025

Other than the snoot support failure and still needing a bit of profile tuning (was using a sus nozzle which is now replaced)

190 0

Canuck Creator @canuckcreator.bsky.social · 09/11/2025

Fun shennangians from yesterdays twitch stream Pokemon running on an RPizero2 over composite to a 4" crt

071 0

Canuck Creator @canuckcreator.bsky.social · 08/11/2025

LIVE RIGHT NOW! Retro crt experimenting and testing take 2, come hang out and join the fun twitch.tv/nero3d

050 0

Canuck Creator @canuckcreator.bsky.social · 04/11/2025

Unfortunatly the @prusa3d.com Core ONE L didnt show up in time for stream today, so that means UNFORTUNATELY i will have a surprise extra Wednesday stream tomorrow....cus aint no way im waiting till Friday to unbox this thing

0181 0

Canuck Creator @canuckcreator.bsky.social · 31/10/2025

Hey i can finally share that I WAS THERE! Cheers to @prusa3d.com for inviting me and others out for this launch event, was amazing to attend in person and finally got the coveted "picture in the print farm" pic Check out my video on the new stuff here! www.youtube.com/watch?v=1OCe...

1160 0

Canuck Creator @canuckcreator.bsky.social · 29/10/2025

That`ll do Couldnt find a BTT ebb 36 Gen 2 mount for the orbiter v2, so a bit of CAD (and only 2 revisions) later, modified a stock a4t one to work Will install on the friday stream, still need to mill some stock off the carriage too

0140 0

Canuck Creator @canuckcreator.bsky.social · 13/10/2025

DOME So. note to self, be sure to dry the CF-PETG THOROUGHLY before starting a 2.5kg, day and a half print with it and not just do a quick test print and go "ehh, should be fine" But other than some ooze boogers to clean up, the R6 astromech dome came out pretty good.

1160 0

Canuck Creator @canuckcreator.bsky.social · 08/10/2025

ya i gotta get around to finishing my t45 suit, got the helmet, pistol and ripper done along with most of the lower body armor peices, need to finish the upper stuff and put it all together

000 0

Canuck Creator @canuckcreator.bsky.social · 08/10/2025

nice, thats one of the things i need to do with mine still, put some decals on it

100 0

Canuck Creator @canuckcreator.bsky.social · 06/10/2025

ITS POLYMAKER RESTOCK DAY! us.polymaker.com?aff=144&utm_... up to 35% off go get that nom 3d printer chow! (yes its an aff link)

060 0

Canuck Creator @canuckcreator.bsky.social · 02/10/2025

Big boot Gouf Cheers to all who joined the stream today. Not quite done (still need to put the decals on) but got the MG gouf custom assembly built.

050 0

Canuck Creator @canuckcreator.bsky.social · 01/10/2025

2000km later. The #gundam is setup back in the studio. Was hoping I could fit it in a slightly different spot. But it's too dang big. So back in the corner it goes lol Cheers to all who joined the twitch stream setting it back up!

081 0

Canuck Creator @canuckcreator.bsky.social · 25/09/2025

I fits, i sits for trips! Really no other choice of position tbh, amazing how quick room goes away when packing a printer, suitcase, LTTSTOREDOTCOM BACKPACK and a uhh 6ft tall 85lb gundam for a weekend at @3dprintopia.bsky.social, Hope nothing gets jostled too much on the trip tomorrow lol

1150 0

Canuck Creator @canuckcreator.bsky.social · 25/09/2025

The new studio rebuild and upgrading is coming along, and in today's video we go retro but with a twist, whats fancier than crown molding? 3D Printed Crown Molding, WITH RGB So check out todays video for some RGB 3D printed goodness (and some other 3dp hacks for good measure)

140 0

Canuck Creator @canuckcreator.bsky.social · 25/09/2025

so apparently 4inch CRT displays are a thing and they are pretty cheap on aliexpress.... ive got ideas, DUMB ideas, but ideas

1190 0

Canuck Creator @canuckcreator.bsky.social · 24/09/2025

Really happy with how tomorrows video turned out, not going to want to miss this one (and its out early for channel supporters later today!)

0100 0

Canuck Creator @canuckcreator.bsky.social · 22/09/2025

When you wear transition lenses and the UV pen you ordered shows up mid stream and you are also a totally mature adult

0204 0

Canuck Creator @canuckcreator.bsky.social · 22/09/2025

LOOK AT THIS GOUF! Live on TWITCH, come hang out while we do some gunpla building and chatting, fun times to be had! www.twitch.tv/nero3d

0100 0

Canuck Creator @canuckcreator.bsky.social · 18/09/2025

Got the @prusa3d.com mk4 set back up with the mmu3 and @repkord.bsky.social repbox its new position and its working away on makerchips for @3dprintopia.bsky.social next week

1130 0

Canuck Creator @canuckcreator.bsky.social · 15/09/2025

Building GUNDAM Gunpla kits on Twitch for a bit, come hang out and join the fun, also slightly more finished studio setup, so testing that too! www.twitch.tv/nero3d

081 0

Canuck Creator @canuckcreator.bsky.social · 13/09/2025

I SHOULD be smart and wait till i finish the video before showing it off, but its just too damn cool to not share So enjoy this teaser pic for this weeks channel video! 85lbs of Prusament filament printed on @prusa3d.com printers later, the 1/10 scale rx78-2 gundam build is now FINISHED!

3275 0

Canuck Creator @canuckcreator.bsky.social · 13/09/2025

Going with a darker shade of gray for the studio background.

1100 0

Canuck Creator @canuckcreator.bsky.social · 12/09/2025

CAD`d up some quick brackets to hold some extra EMT conduit to the ceiling with a Clamp arm for an adjustable overhead camera mount Quick, cheap, easy Gotta love #3dprinting

180 0

Canuck Creator @canuckcreator.bsky.social · 12/09/2025

Studio main cam (sony a5100 with 24mm tamron lens) and overhead cam (canon m200 with kit 15-45 lens) all setup and ready to rock and just in time cus we got some gunpla kits waiting to be built!

0100 0

Canuck Creator @canuckcreator.bsky.social · 11/09/2025

New studio room camera and gubbins acquired. Going to build and set up the rig on the twitch stream tomorrow most likely. Gonna design an overhead camera mount as well.

0110 0

Canuck Creator @canuckcreator.bsky.social · 08/09/2025

Hey it's starting to look like something ! Cheers to all who joined the twitch stream. Got work done on the new studio setup and got a list of things I need to go shopping for as well. Not done yet but getting there!

2141 0

Canuck Creator @canuckcreator.bsky.social · 27/08/2025

Last gundam pic for awhile, cant spoil the ending of the video series, but did the first test full height assembly of it last night and dang...its big Still missing a few pieces and needs tweaking in spots, but we are getting near the end of the build. Cant wait! #3dprinted

2294 0

Canuck Creator @canuckcreator.bsky.social · 24/08/2025

"i showed you my g-fighter, please respond" NEW VIDEO! Part 2 of the 1/10 scale Gundam build series is now LIVE! Still work to do on the build but it is getting there and it is looking GREAT so far! Huge shoutout to @prusa3d.com and Gloop for supporting the build! www.youtube.com/watch?v=iaVp...

1216 0

Canuck Creator @canuckcreator.bsky.social · 22/08/2025

Wussup? Big progress update on the RX78-2 Build, got the head wired up and assembled and couldn't resist putting the upper body together for a quick pic. All parts printed on @prusa3d.com D printers in prusament /Buddy3D PETG #gundam #gunpla #3dprinted

0111 0

Canuck Creator @canuckcreator.bsky.social · 21/08/2025

Did some work on the RX78-2 Gundam head, of course i forgot to print some stuff so had to pause here, but got all the LEDs wired up and tested, even has a rechargeable battery (as long as i didnt fry the recharging part during some soldering work lol) #gundam #gunpla #3dprinted

0130 0

Canuck Creator @canuckcreator.bsky.social · 19/08/2025

This is getting ridiculous Now there are TWO of them!

2181 0