iiinova — where your digital self keeps evolving

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 23/06/2025

I love that they put their cat in their stories XD #KPopDemonHunters #Kipo #KipoAndTheAgeOfWonderbeasts (Just kidding, Yumyan! I will always love you!)

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 30/03/2025

Also me when there's an hour less to sleep xD

010 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 30/03/2025

Switching to daylight savings time is kind of like Christmas for horse people 😀 Why haven't you seen this Link cosplay from #LegendOfZelda #BreathOfTheWild during my cosplay posting spree? Because I didn't make it/assemble it. The entire cosplay is borrowed from the Austrian cosplayer Lux Cosplay!

140 4

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/03/2025

I molded the Royal Griffin myself. It's a Smooth-On Dragon Skin two part mold that is still connected at the forehead, so it opens like a book. The mane is a bit tricky, but I found ways to get a clean cast. The resin I used was Smooth-Cast 65D.

020 2

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/03/2025

I sculpted them with monster clay. @brazenbold.bsky.social molded this one for me, as I was not yet familiar with molding and casting. You may have noticed that the original sculpt doesn't have horns. I thought they would be too complicated to mold, so I sculpted them afterwards with Apoxy Sculpt.

120 2

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/03/2025

I'm gonna continue posting here with works that are not (entire) costumes, but little trinkets or props. In 2019 and 2020 I sculpted a Wyvern and a Royal Griffin trophy from #TheWitcher3. They would be a bit too big for keys chains, but for bags they are perfect. #sculpting #creaturedesign

180 8

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 06/02/2025

I made an Ex Altiora, which I also got signed by a bunch of Magnus & Rusty Quill folk. I used a book as base, gave it a fake leather wrapping (foam) and made a secret compartment for the lightning effect! The button to trigger it is completely invisible. @madnesscreations.com did the electronics^^

1193 19

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 05/02/2025

I made Niffty from #HazbinHotel at the same time when I made monster Bonzo cause I love stress? I think I made this costume almost exclusively at @tsuya.at 's place, who also made the belt and gloves and plotted the stains and poodle for me! Photos: www.instagram.com/zerotwo.psd/

150 5

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 30/01/2025

Bonzo reading all the hot gossip about him in the transcript of the Season 1 QnA #TheMagnusProtocol @rustyquill.com

09415 94

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

All that was left then was glueing on the... blisters? pimples? lumps? The orange things, which are toy foam balls in two sizes which I cut in half and painted orange. The bigger ones on the head I made with 5 mm EVA foam. And also added the decorative stitches! Boy, what a long post...

030 3

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

Then magic happened and suddenly it looked alive! Matt from www.instagram.com/brazen.and.bold/ painted Bonzo, shading, blood smears and dirt! Also, you can see me wearing the trousers already, these are just from a comfy trousers pattern by @tsuya.at

240 4

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

The eyes in the ripped-open belly are made the same way the one behind cutesy Bonzo's nose was: painted iris behind a cabochon, foam eye lids, cotton and latex, paint it. The head basically got the same treatment like the body. The weird eye lid is also just foam, later added latex and cotton to it.

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

The mouth is 1cm high density foam, cut and dremeled into shape. The lips are foam clay! The eyes are acrylic domes with a bit of clear resin for the lens, I then simply glued the picture of an eye behind it. The veins are strings of wool glued to the dome. Last step is painting the inside white!

130 3

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

I made a first layer of gloves so I can pull everything off the 3D print if I need to repair a string or elastic. I glued batting to these under-gloves and added foam clay for more pointy fingers. The actual skin then goes over this construction.

130 3

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

The 3D models for the mechanical hands are by www.etsy.com/uk/shop/Faeb... @madnesscreations.com adjusted the hand to Bonzo's needs and printed it for me. I decided to sew gloves into it cause the hand will be super closed off and I needed to make sure I'd find the strings (spider cw on the 2. pic)

130 3

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

For the arms I sewed tubes on my sewing machine and pinched and pulled them into shape. I did the skin for the shoes also with the machine as they have an easy shape. For the collar I experimented with paper to get the shape right.

130 3

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

To create Bonzo's skin folds I used quilt batting! When I was finished I covered everything in newspaper to get a better feel for the size of the fabric to skin Bonzo. Skinning was quite the process, a lot of pulling and gluing. I then sewed the pieces together by hand.

250 5

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

I 3D-sculpted Bonzo's body in Nomad Sculpt. @madnesscreations.com made a papercraft pattern using CozyBlanket by @sparseal.bsky.social, which we printed and I then assembled, cut into a suitable pattern again, traced it onto 1 cm upholstery foam, cut it out, glued it together! So far so good!

1124 12

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 27/01/2025

At the #TheMagnusProtocol S1 premiere I said I'm gonna build Monster Bonzo and I did it! Boy, this costume was interesting to make, but I'm super happy it worked out and I wore Bonzo at MCM London in May and the S2 premiere in October 2024. Photos: @woegster.bsky.social #RustyQuill

3279 27

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 25/01/2025

It's been a while, but my most recent work would be this wyvern. Monster Clay sculpt molded with Dragon Skin (fitting, heh) and casted with Smooth-Cast 65D.

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 23/01/2025

I brought this costume to the 10 anniversary ESO Tavern last year. Of course I didn't bring my cat with me, but I found a perfect sized plush to wear it^^ People seemed to really like him and I got to show him to the art director of ESO! 🥰

0120 12

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 23/01/2025

@madnesscreations.bsky.social designed the silver ware tray in Blender and printed them for me. I made the plates with EVA foam, primed and painted everything. Everything's attached to a harness which can be easily opened and closed via a strip of Velcro.

190 9

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 23/01/2025

The small details like the handle, the decorative line and the spiked are also made with EVA foam. I stippled flex bond onto it to give it a bit of texture and painted it with acrylic paint. The chin straps are attached to the helmet with a rubber band.

190 9

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 23/01/2025

@tsuya.bsky.social luckily had a small cauldron (still too big for Boggy's head, but I scaled the pattern down) from which I took the pattern. I then build the cauldron helmet with EVA foam.

180 8

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 23/01/2025

My first cat cosplay! When I first saw the Catwell pet from #ESO I thought this would be perfect for Boggy, but I didn't know how he'd react to it. When he wore a jacket like a champ for a x-mas card, I knew he'd be able to do it! Valley stock: kewl on Pixabay @elderscrolls.bethesdastudios.com

710138 101

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

I added a bit of shading and blood to the fabric and used a thick grey yarn as decorative top stitching and voila! ^^

071 7

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

The original nose became detachable with magnets! There are magnets glued inside the head and the nose got a second back cover with magnets sandwiched in between.

140 4

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

The eye is just a iris and pupil painted on paper with a clear cabochon glued on top. The eyelids are just foam. I pre-painted it, then added texture with cotton and latex and painted that again. I love it so much! I then just glued it to the inside of the head.

140 4

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

I have Bonzo this skull nose. Monster Bonzo had his skull ripped open from his nose over his forehead, so I thought I'd add a beginning tear and conseal it with the nose. And I'd add a little eye looked out from within

140 4

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

I also made gloves from the jumper's sleeves and we bought a second jumper to actually wear as intended. I added a second glove as understructure to create the illusion of only 4 fingers of similar thickness.

130 3

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

For the collar I sewed a foam strip and triangles into white cotton, bought a pink tie and used everything together and then to the head. I also just bought a purple hat and attached it with snap buckles for easier transportation.

130 3

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

Cutesy Bonzo's structure looks knitted, I actually used a jumper for that. I draped it to the foam ball, sewed it, cut out the hole for the mouth and glued the mouth into that hole. At first I also just glued on the nose, I'll come to that later

120 2

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

Mr. Bonzo is based on Mr. Blobby and that one has jiggly eyes. So I wanted to replicate that effect. For this I pushed the spring from a pen through the foam and added a metal nut to give the foam iris a bit more weight. I glued that to the head and sewed the acrylic dome on via holes I had drilled.

140 4

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

I shared my idea with my husband, who promptly answered "No!" I then texted my friend Tsuya who also enthusiastically replied "NO". So I started researching and planning!^^ I had just made an upholstery foam costume, so the general structure with be exactly that with a EVA foam mouth and nose.

150 5

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 17/01/2025

In September 2023 the ARG for #TheMagnusProtocol hit and Rusty Quill blessed us with Mr. Bonzo! When a discussion in the discord talked about how exactly Bonzo works, like is it alive or is there a person in the suit I realized: "I can make suits!" Cosplay worn by @madnesscreations.bsky.social

1154 15

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 14/01/2025

Also learned about skirt makers while sewing this costume: Me: The skirt is shorter in the back with this pattern, I'd need to measure it from the floor up and not from the hip down! Tsuya: Hold my beer - *fishes out this funky little chalk dust blowing machine out of the depths of her workshop*

120 2

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 14/01/2025

And because shark Nimona wasn't enough for Dragon Con 2023, I had to make human #Nimona too! Simultaneously of course! Couldn't have done it without @tsuya.bsky.social tho, who visited to crunch with me, who sewed all the scales to fabric, did all the eyelets and much more!

191 9

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/01/2025

The teeth are simply cut out of 5 mm EVA foam and screwed in via Chicago screws (I had to make them removable to fit it in a suitcase. And strap the foam down with 4 belts). I added the sunglasses after Dragon Con, they're also just 5 mm EVA foam with plastic foil and are held in place by magnets.

010 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/01/2025

Sewing the skin was really something. I had to make a new pattern for it directly taken from the foam shark and transfering the pattern, cutting and sewing took forever... The eyes are literally just 2 mm foam attached with Velcro xD (I wanted them removable for transportation)

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/01/2025

While working on the structure inside the shark I would either crawl through the mouth like being eaten or stand inside the shark and work in a very confined space. I made it similar to the Smooth-On bottle: a hoop inside (which I can disassemble), which I thread thru foam loops and suspenders.

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/01/2025

I used 3 cm upholstery foam, which was probably overkill, but I haven't made a costume like this before, so I went with the safest option.

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/01/2025

I made the pattern by sculpting half of the shark in 1:12, covered it in masking tape and cut that into my pattern. I then scanned it, scaled it to size and I had my pattern. To check if it works I made a mini-shark. Cause the pattern is so big I added a grit to it, so I can easily glue it together.

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 02/01/2025

Initially we didn't want to go to Dragon Con in 2023, but 2 months before the con we decided to go anyway. I wanted to bring something fun again. Around that time I watched #Nimona and then I saw a comic of Ballister in a shark onesie and my mind was "shark suit!"

1216 21

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 26/12/2024

We simply climb into the bottles through a Velcro (mine was kindly sewed by @tsuya.bsky.social to save time xD) in the back and there's a plastic foil window glued into the front so we can see. A regular fan for inflatable costumes then makes the magic happen!

000 0

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 26/12/2024

I also made both frames for the inside structure. It consists of two hoops (which I made with Worbla cause I could not find a Hula Hoop in the right size for a reasonable amount of money) and 4 wooden rods.

100 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 26/12/2024

Here are a few steps of painting the label. And I did it twice cause I made both labels (for part A and B) cause Brazen & Bold were super busy getting work done for Gamescom!

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 26/12/2024

I had to make a decision, keep looking for a print shop or make the label myself. And since there was no guarantee I'd find a shop, so I didn't wait any longer and made the label myself. For this I made stencils. But I didn't have a plotter yet, so I printed, cut out and glued everything myself...

110 1

Bloody Baroness Cosplay @bloodybaronesscosplay.com · 26/12/2024

The pattern was fairly easy, it's just cylinders. I essentially used upside-down pants for our legs to have more movement. The hem of these upside-down pants closes around our legs just underneath our knees with a rubber band.

110 1