iiinova — where your digital self keeps evolving

Zetta @zbit.barkitup.dog · 18/07/2026

Reposted by Bark it Up! Suits and Rave Gear

oh yeah, I turned the sabers into a staff model. Saves on a controller and I'm really happy how the light diffusion turned out with the increased segment diameter. Next upgrade is a bigger 3d printer to make things in less pieces and polycarbonate versus current tough+/PETG builds. Flush button!

Close up of handle with flush button offset to one end. Staff is lit with the same ZettaLights controller as all my other builds.

Staff - lit in rainbow mode. Room lights on to see all parts.

Staff - lit in rainbow mode. Room lights off to showcase the staff glow.

121

Bark it Up! Suits and Rave Gear @barkitup.dog · 18/07/2026

site queue testing, don't mind the mess. :3 barkitup.dog #bark-queue Boops | ZettaLights Saber - full kit | assembly | eta soon™

barkitup.dog

Bark It Up! - ZettaLights - Sabers, Harnesses & More

021

Reposted by Bark it Up! Suits and Rave Gear

Zetta @zbit.barkitup.dog · 17/06/2026

First build is complete! Birthday gift! Both heavier PETG and lighter Tough+ blades <3

Assembled and powered single sabers with extra tough+ blades

Assembled and lit double bladed saber zoom on coupler

Zetta @zbit.barkitup.dog · 16/06/2026

Reposted by Bark it Up! Suits and Rave Gear

Clear PETG (top) vs White Tough+ PETG is heavier feel vs the hollow Tough+ as it needs more wall and infill to be more durable. The result is a more hefty overall weight and feel when wielded. PETG is still somewhat more brittle than Tough+ overall, but both materials survived durability tests

PETG (top) and Tough+ blade segments comparison.
Warm colors side view

PETG (top) and Tough+ blade segments comparison.
Cool colors straight on view

Zetta @zbit.barkitup.dog · 15/06/2026

Reposted by Bark it Up! Suits and Rave Gear

V2 build 1 - birthday gift Refined the whole build to print on an a1 mini. Durability drop tested, swing tested, twirl tested. Lighter, hollow tough+ blades or heavier (for durability) transparent PETG (in production) Same custom Arduino based SAMD21 PCB

241

Reposted by Bark it Up! Suits and Rave Gear

Zetta @zbit.barkitup.dog · 06/06/2026

V2 is done! (Internally I'm calling it v2.1 'cause revisions and fixes on the base v2 redesign overall)

131

Reposted by Bark it Up! Suits and Rave Gear

Zetta @zbit.barkitup.dog · 31/05/2026

Not exactly disappeared. Still working on things. Still working on my self. Engineering v2 of the saber con prop from #furlandia Coupler tube is going to get a different version already. A little too thicc, this one is.

Prototype v2 saber design.
Separate sabers joined with a coupler for double blade mode.
Pictured separate.
(Same platform as other LED gear, some code modifications)

Prototype v2 saber design.
Separate sabers joined with a coupler for double blade mode.
Pictured separate, zoomed in on handles and coupler design.
(Same platform as other LED gear, some code modifications)

Prototype v2 saber design.
Separate sabers joined with a coupler for double blade mode.
Pictured joined via coupler bayonet tab interface lock.
(Same platform as other LED gear, some code modifications)

251

Reposted by Bark it Up! Suits and Rave Gear

Zetta @zbit.barkitup.dog · 31/05/2026

Oh, hi! If anyone spots any posted photos of this fox @furlandia.bsky.social 2026, share/tag me! Yes, there were cookies. No, there was no milk. #furlandia

Darth Fox (me, Zetta) at furlandia posing with double bladed v1 prototype saber.
Bowstaff pose with both paws on the handle.

Darth Fox (me, Zetta) at furlandia posing with double bladed v1 prototype saber
Blade held back and using the force(?) to request you to get some cookies

Darth Fox (me, Zetta) at furlandia posing with double bladed v1 prototype saber.
Close up force use pose.

Darth Fox (me, Zetta) at furlandia posing with double bladed v1 prototype saber.
Convention prop cutouts found in con space.

072

Reposted by Bark it Up! Suits and Rave Gear

🪷 @mori.barkitup.dog · 14/02/2026

This guy's still for sale. www.thedealersden.com/listing/fire...

032

Reposted by Bark it Up! Suits and Rave Gear

🪷 @mori.barkitup.dog · 08/02/2026

If this gets a few likes, I'll share the art and idea of what i plan to make.

143

Bark it Up! Suits and Rave Gear @barkitup.dog · 29/01/2026

Fire Shiba Inu head done. Will be out as a head only item that you can add more money to, to get a tail and gloves. The starting price will be 750 USD. This is the second head I have ever made. So there ARE errors here and there. But they are not that bad. Will be put up at 6pm PST. -🪷Mori🪷

Grey, black, red yellow dog fursuit head.
Has a big nose. 3d printed teeth and a yellow mouth with fire designs in the fur.
Yellow eyes with grey iris and black pupils.

154

Reposted by Bark it Up! Suits and Rave Gear

🪷 @mori.barkitup.dog · 29/01/2026

ko-fi.com/barkitup/shop Added a lot of old characters i have to my shop that i decided to sell. If you want to haggle feel free.

045

Bark it Up! Suits and Rave Gear @barkitup.dog · 26/01/2026

I finally got the spoons to work on the head again. Fixed the eyebrow and cheek where it was badly balding. Bad quality fur (red) was shaved a bit too close on and brushed and it balded. But now. You can hardly tell what side is balded / was fixed lol This will be for sale soon. 🪷-Mori-🪷

042

Bark it Up! Suits and Rave Gear @barkitup.dog · 06/01/2026

16 rolls. 300 LEDs per roll. Cut in half for 32 strips of 150. These are all going on the ceiling to be controlled by a single custom controller. Soon!

Box of LED strips shipment.
Plan to stick 4800 LEDs on the ceiling to make a rave room in the living room.

152

Bark it Up! Suits and Rave Gear @barkitup.dog · 23/12/2025

Apologies for lack of posts. The whole house has been sick. The 4800 LED ceiling project will be underway by the new year! Much excite. Such LED. <3 -Z

041

Reposted by Bark it Up! Suits and Rave Gear

Zetta @zbit.barkitup.dog · 06/12/2025

#FurFest Gear looks to be working fairly well! I'm slightly concerned on the red activity, may look at raising the upper limit of the sensitivity range ... I got my X right next to a woofer... Red is a little overactive... Maybe? :3c

032

Bark it Up! Suits and Rave Gear @barkitup.dog · 06/12/2025

Late post for last night's content, but typical con stuff. @furfest.org 7-point custom with leg strap add-on for @chocomage.bsky.social Bonus collar and leash! Bulldog 3-point with leash @riptyde.bsky.social <3 -Z

174

Bark it Up! Suits and Rave Gear @barkitup.dog · 04/12/2025

Going to MFF this weekend? Keep an eye out for Zetta in 1 of 3 styles of harness. Stop him for a hug! Ask questions! Check out the gear! Ask him about the (soon to be) 4800 LEDs on his living room ceiling that will run off the same hardware he is carrying around!

Bulldog style 3-Point with optional collar and leash add-on(s)
Zetta wearing pup gear and this lit LED gear.

X 4-Point Style Harness
Zetta wearing fox head partial and lit harness.

'Standard' 5-Point Style Harness
Zetta wearing pup gear in front of a mirror with harness lit in FFT mode

Bark it Up! Suits and Rave Gear @barkitup.dog · 04/12/2025

Worried about the bag getting flagged so made a little demo box using the original hand-assembled PCB and the silicone seal test LED strip Bag: through no issue Zetta: flagged for additional pat down screening TSA agent at the bins: "What's that? Oh that's cool." Zetta: 😰 <3 -Z

Bark it Up! Suits and Rave Gear @barkitup.dog · 01/12/2025

IT'S HAPPENING! MFF Launch Week is a GO! Pre-orders are open NOW! Put 'bsky' in the 'Special Requests and/or Feedback' section on the last page of the form for an extra 5% discount off the intro MFF launch pricing. Payments and production to begin January. barkitup.dog <3 -Z

barkitup.dog

Bark It Up! - Order Request Form

Thank you for your interest! There are a few things to note for the order process. === ORDER PROCESS === 1. Select your style 2. Fill out measurements (see guide below) 3. Submit form 4. We'll c...

142

Bark it Up! Suits and Rave Gear @barkitup.dog · 28/11/2025

Little 4 way USB-C cable inside a pack of rechargeable AA and AAA batteries at Costco. It can charge 3 of my boxes at once on my 18w brick. (1A each charge rate) Sadly it's sharing power to the USB-A and USB-C ports so I can't also charge my phone... Will use the AA and AAA somewhere... <3 -Z

3 LED controller boxes charging off a single USB-C splitter cable.
Power adapter rated for 5v 3A so can only charge 3 boxes at once.
Need more power ...

142

Bark it Up! Suits and Rave Gear @barkitup.dog · 27/11/2025

Pending some materials to make an LED leash, here's the Bulldog style and collar on a good pup. This will be 1 of 4 styles running around MFF. Feel free to say hi! <3 -Z

Bulldog 3-point style harness with added collar displayed on a good pupper waiting to go for walkies.

Bark it Up! Suits and Rave Gear @barkitup.dog · 26/11/2025

Remake! The Leg Strap add-on for the last 7-Point build ended up a little too long. These are 40 LEDs each down from 53. Seal curing overnight then assembly tomorrow to get them out for MFF next week! I'll have a few builds with me! Follow the lights if you want to chat!

011

Bark it Up! Suits and Rave Gear @barkitup.dog · 18/11/2025

Box! Designed for easy use, even while wearing paws or mitts. 3d printed PETG enclosure. Integrated clip. Slide toggle switch for on/off. Low profile to prevent accidental toggle. Single push button to change or lock the mode. Single swappable 18650 battery. USB-C for run and/or charge.

Close up showing the face of the controller (switched on with green LED in the background)

Controller bottom showing bottom plate removed and 18650 battery.

Controller top with plate removed showing the main electronics and control hardware.

Bark it Up! Suits and Rave Gear @barkitup.dog · 18/11/2025

Work shopping some hook and loop for slight adjustability at some key connection points. New X design Allows the leg strap add-ons on the current MFF 7-point build to be modular Will update with some better photos once the harness is on the fursuit it was measured for Set for LAUNCH! <3 -Z

New X design showing full length LED runs along both straps with a single O ring and hook and loop fastener to tie it together.
(Lower straps loop through O ring at front to offer some adjustability

Close up of an adjustment point for the X 4-Point design.
A square of hook on the end of the strap which is passed through the Chest O Ring.
A length of loop strip lines the back of the LED strap for the hook to attach. (Amount of adjustability depends on design, roughly 6 inches here for clarity. Adjustment points on other designs will typically be a few inches to reduce bulky excess material that doesn't have LEDs inside)

Wide view of 7-point design with leg strap add-ons slightly visible on the left and secured to the main harness via hook and loop.
Design incorporates buckles on the chest strap with slight adjustability points via hook and loop at the buckles.
The connection points at both hips offer adjusted for the waist straps via hook and loop on the back straps.
It also gives a more lightweight result with less buckle weight on top of the added few inches of fine tune adjustment.

A fox (Zetta) showing off the 7-point design.
Leg straps not connected here to show the base design.
7-point meaning there's 7 straps that meet at the chest.
<3

Bark it Up! Suits and Rave Gear @barkitup.dog · 11/11/2025

Got a battery for the multimeter. Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative. TL;DR: there's enough juice to rave all night. Also run+charge via power bank or swap 18650 batteries. Either way, the power ceiling is HIGH. <3 -Z

143

Bark it Up! Suits and Rave Gear @barkitup.dog · 09/11/2025

🦊 ZettaLights - Custom LED Harnesses 🎵 Real FFT analysis (8 frequency ranges) ⚡ 600+ LED capacity* 🔋 User-swappable 18650 (6+ hour runtime**) 🔓 Open source everything 💻 Custom engineered PCB $650-1500+ | Standard or full custom Pre-orders launch MFF weekend. Production starts January. barkitup.dog

111

Bark it Up! Suits and Rave Gear @barkitup.dog · 09/11/2025

MFF prepping! New 'Full' 7-Point Style! (with Leg Strap Add-on) 252 LEDs! (+106 LEDs = 358 LEDs) Designed for a friend in fursuit so excuse the slack! :3 Redesigned 'X' 4-Point Style! 138 LEDs! Let's gooo!

7-Point 'Full' Style Harness with added Leg/Thigh straps. Back view. Rainbow LED mode.

7-Point 'Full' Style Harness with added Leg/Thigh straps. Side view. Rainbow LED mode.

7-Point 'Full' Style Harness with added Leg/Thigh straps. Front view. Rainbow LED mode.

Redesigned 'X' 4-Point Style Harness. Rainbow LED mode.
Front view on workbench.
New seamless style, O Ring only present on front.
LEDs cross on the back along with the straps.
Hook and Loop adjustability via the lower straps on the O Ring.

111

Bark it Up! Suits and Rave Gear @barkitup.dog · 27/10/2025

Field testing! Gear night at a local venue. A lot of fun! Pups, fuzzies, and everything in between! We got in a bit early to get some action shots before it got bumping.

153

Bark it Up! Suits and Rave Gear @barkitup.dog · 25/10/2025

🦊 ZettaLights - Custom LED Harnesses What makes us different: 🎵 Real FFT analysis (8 frequency ranges) ⚡ 600+ LED capacity* 🔋 User-swappable 18650 (6+ hour runtime**) 🔓 Open source everything 💻 Custom engineered PCB $500-650+ | Standard or full custom builds Pre-orders: barkitup.dog

122

Bark it Up! Suits and Rave Gear @barkitup.dog · 22/10/2025

Open Source? Yes! Testing has succeeded and I think it's in a working state. Engineered PCB design files, firmware, and current 2.0 Arduino code. www.patreon.com/posts/141779... Yay! <3 -Z

patreon.com

Open Source! Soft-Launch | BarkItUp

Get more from BarkItUp on Patreon

021

Bark it Up! Suits and Rave Gear @barkitup.dog · 17/10/2025

Slightly thrown together in 2 evenings so it can be tested tonight and at other events! Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink. Will see how it holds up in testing! <3 -Z

Standard style harness with collar in Rainbow mode

Bark it Up! Suits and Rave Gear @barkitup.dog · 16/10/2025

Oh yeah! We got a business card! Testing the hardware at a few local venues in the coming weeks. Pre-order soft launch to follow! <3 -Z

Bark It Up! business card front and back (harnesses, collars, art, fursuits, accessories)

062

Bark it Up! Suits and Rave Gear @barkitup.dog · 10/10/2025

All the pieces are in place, time to start building! This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer. Testing layouts and some application of heat shrink for a little extra protection!

Harness electronics build layout with wiring and extras

Bark it Up! Suits and Rave Gear @barkitup.dog · 08/10/2025

Hm yes lovely. Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern. Other than that hiccup, the head is almost done. The fursuit makers chacha never ends. -Mori

Front view of the fursuit head, fire dog
Tape pattern coverage and nose placement tape

Dog fursuit with tape on it to make a pattern to fix the fur that needs to be replaced.

Bark it Up! Suits and Rave Gear @barkitup.dog · 01/10/2025

Box! v2! Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom. Clip! Adding a little switch cover/extension for the power switch, but this is the final revision for now! (Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)

Custom box controller, battery side lid off

121

Bark it Up! Suits and Rave Gear @barkitup.dog · 01/10/2025

Boards! Finishing touches on enclosure box to be revealed soon!

Prepared PCB assemblies, custom controller.

010

Bark it Up! Suits and Rave Gear @barkitup.dog · 30/09/2025

Don't mind the mess. (And all the posts on sites that is all Barkitup related) 95% done (pinned), Need finishing touches - nose and teeth. I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest. -Mori

Bark it Up! Suits and Rave Gear @barkitup.dog · 30/09/2025

I apologize for the double post, was just fixing something! -Mori

020

Bark it Up! Suits and Rave Gear @barkitup.dog · 30/09/2025

Since the about info box is too small for everything. Mori decided to post this- to pin this. - How to contact us via Telegram. t.me/Barkitup - For larger detailed posts Patreon - www.patreon.com/c/barkitup/h... - How to support Ko-fi - Store / Support. (For now) ko-fi.com/barkitup

011

Bark it Up! Suits and Rave Gear @barkitup.dog · 30/09/2025

We have started to put Digital Refsheets (furry adopts) on our Ko-fi ko-fi.com/barkitup Each ref bought can become a fursuit later on. We will open Fursuit Rank Tiers 1-F once we have finished premade- fire dog. Some Rave Gear slots will be listed soon too once we have all the supplies. -Mori

000

Bark it Up! Suits and Rave Gear @barkitup.dog · 29/09/2025

300 LED on Custom Controller test! Multimeter apparently not reading voltage or current properly after sitting in storage so long. Half of the calculated limit on the controller. Ran FFT mode for over 3 hours before test was interrupted. (Cats ...)

LED array showing 300 LEDs and custom controller.

020

Bark it Up! Suits and Rave Gear @barkitup.dog · 18/09/2025

Box! Button! USB! Custom PCB based on a few Adafruit dev boards with some components beefed up for higher amperage, more LED potential, and use of 18650 battery. Can be run and/or charged via onboard USB-C. 1 amp limited charge rate. Main switching diodes rated for 5A.

141

Bark it Up! Suits and Rave Gear @barkitup.dog · 16/09/2025

So... Metal hardware rivets or sewn edge?

020

Bark it Up! Suits and Rave Gear @barkitup.dog · 01/09/2025

Electrical test - Prototype 'standard' style harness (X + Y ?) Full assembly soon-ish