iiinova — where your digital self keeps evolving

3DPrintBunny @3dprintbunny.bsky.social · 30/09/2026

This is my new Koi Art Work. Printed on my @bambulab_official H2C stls and 3mf: makerworld.com/en/models/33...

3DPrintBunny @3dprintbunny.bsky.social · 30/08/2026

I had a Patreon request to convert my Savannah Vase into a Bonsai pot. I redesigned it and added drainage and wiring holes and some feet, and I printed it on my @bambulabglobal.bsky.social H2C. FYI: The tree was added using AI stls and 3mfs: makerworld.com/en/models/32...

050

3DPrintBunny @3dprintbunny.bsky.social · 14/08/2026

My Savannah Vase is now available to download free. If you like my vase please consider dropping me a boost on Makerworld (its free) or support me through Patreon. It helps me keep doing what I do.😊 stls and 3mfs: makerworld.com/en/models/31... Patreon: patreon.com/3dprintbunny

070

3DPrintBunny @3dprintbunny.bsky.social · 22/07/2026

I have been playing with full spectrum in Snapmaker Orca for my @snapmaker.bsky.social U1 to create a realistic stone/terracotta effect on my latest vase. I've used a combo of a 50/50 mix and a gradient with a rough surface to create the little blips.

080

3DPrintBunny @3dprintbunny.bsky.social · 14/07/2026

Loving my @snapmaker.bsky.social U1. I wouldn't have tried printing my tiny dog as a dalmatian previously because of the filament waste and print time. With the U1 the print time is slashed and: next to no waste 😊

070

3DPrintBunny @3dprintbunny.bsky.social · 24/06/2026

My new String Art is called Not Today. Its printed in three parts with the bench and tree visible through the rain. stls and 3mf: makerworld.com/en/models/29...

0100

3DPrintBunny @3dprintbunny.bsky.social · 10/06/2026

This is my Ribbon Vase, it has a reservoir for water at the bottom and a stem guide at the top. It can hold either a single stem or maybe a small bunch of flowers. stl: than.gs/m/1561963

070

3DPrintBunny @3dprintbunny.bsky.social · 26/05/2026

These are the watchers, the first in a series of Oddlings I'm designing. They slot over your monitor and watch you work. I hope you like them. 😁 STL: makerworld.com/en/models/28...

080

3DPrintBunny @3dprintbunny.bsky.social · 24/05/2026

They seem gentle. I haven’t confirmed this yet. STL: makerworld.com/en/models/28...

090

3DPrintBunny @3dprintbunny.bsky.social · 12/05/2026

Hello everybody. It's good to be back. I have cleaned up and thrown away everything that was damaged from the workshop floodings. Now I can get back to designing and playing with my new @snapmaker.bsky.social U1! This is my Peacock String Art, do you like it? stls and 3mfs: than.gs/m/1548707

than.gs

Peacock String Art - 3D model by 3dprintbunny on Thangs

This is my Peacock String Art, printed in four colours. I have attached the files plus 3mfs for Bambu, Creality and Snapmaker U1 (Orca). It needs to be printed

0162

3DPrintBunny @3dprintbunny.bsky.social · 30/03/2026

Bit sad today😕 My workshop has flooded twice in the last few weeks and lots of stuff got very wet! I need to spend a bit of time sorting out, throwing away and hopefully finding a way to flood-proof for the future.

3100

3DPrintBunny @3dprintbunny.bsky.social · 24/03/2026

First multicolour string print on my new @snapmaker U1 and its done a fantastic job. This is my sunburst string art printed in 3 colours. 😊 I love the mottling effect you get from certain angles.

1201

3DPrintBunny @3dprintbunny.bsky.social · 22/03/2026

So I have my new @snapmaker.bsky.social U1 up and running! Now lets print some strings! 😆

1140

3DPrintBunny @3dprintbunny.bsky.social · 15/03/2026

I made an Easter infill basket with some little bunnies on. No supports, no colour changes. Great as an Easter gift filled with chocolate eggs. 🥰 stls and 3mf: makerworld.com/en/models/25...

0102

3DPrintBunny @3dprintbunny.bsky.social · 15/03/2026

I made an Easter basket with some little 3d print bunnies on using my infill technique. 🥰 No supports, no colour changes. Easy as! stls and 3mf: makerworld.com/en/models/25...

071

3DPrintBunny @3dprintbunny.bsky.social · 03/03/2026

Not long until F1 starts again and to celebrate I have created this iron-on transfer. The car silhouette is created using all the F1 tracks and can be ironed onto a t-shirt or other clothing. stl and 3mf: than.gs/m/1524621

170

3DPrintBunny @3dprintbunny.bsky.social · 11/02/2026

This dogs string art has been on my wish list for a long time and I'm so glad to have finished it. 😊 The frame prints separately so it can be printed in a single colour (Blue) or with a single colour swap (Black). Stls and 3mfs: than.gs/m/1513382

071

3DPrintBunny @3dprintbunny.bsky.social · 05/02/2026

A cute little geometric Hearts Bowl for Valentines Day 🥰 stls and 3mf: makerworld.com/en/models/23...

040

3DPrintBunny @3dprintbunny.bsky.social · 25/01/2026

This is my Valentines Swing Carousel, so all the little hearts can have some fun 🥰 Stls and 3mfs here: than.gs/m/1506058

092

3DPrintBunny @3dprintbunny.bsky.social · 20/01/2026

Not long until the Lunar New Year festivities begin. 2026 is The Year of the Horse and this year I thought I'd combine a quilling style with my signature strings. The design prints without supports and can be printed on a single colour printer.😊 stls and 3mf: makerworld.com/en/models/22...

0152

3DPrintBunny @3dprintbunny.bsky.social · 16/01/2026

This Silhouette Ramadan Calendar has been great fun to design. You add a slide to the picture each day and watch the scene gradually come together. All the parts are quick and easy to print and can be printed on a single colour printer. 😊 stls and 3mfs: than.gs/m/1501459

070

3DPrintBunny @3dprintbunny.bsky.social · 30/11/2025

A little Santa Pot to put goodies in. It can be scaled up and down. It also looks nice as a single colour print.😊 stls and 3mfs: than.gs/m/1472398

0110

3DPrintBunny @3dprintbunny.bsky.social · 28/11/2025

Sometimes I absolutely love when things don't print quite as you expect. Here is some serendipitous art 😊

0100

3DPrintBunny @3dprintbunny.bsky.social · 25/11/2025

Is Die Hard a Christmas Movie? I think so! Thus we need a Die Hard Advent Calendar right? But what happens to Hans on the final day?😲 Perfect for any Die Hard Fans. stls and 3mfs: makerworld.com/en/models/20...

0132

3DPrintBunny @3dprintbunny.bsky.social · 17/11/2025

This is my Ice bowl, created using superimposed tessellation patterns and, after much trial and error, printing nicely without supports. 😊 stl: than.gs/m/1468049

1100

3DPrintBunny @3dprintbunny.bsky.social · 02/11/2025

A bit more work on a new string technique. This time using it to create a glowing effect on my heart strings model. #Ilove3dprinting

0142

3DPrintBunny @3dprintbunny.bsky.social · 25/10/2025

Halloween Infill Spiders Lamp😊 stls and 3mf: makerworld.com/en/models/19...

0161

3DPrintBunny @3dprintbunny.bsky.social · 21/10/2025

This is my swirl bowl. It's designed using multiple tori, each one twisted and turned a little compared to the previous one. stls and 3mf: makerworld.com/en/models/19... Its printed in the gorgeous @cookiecad Sunrise Rainbow PLA: amzn.to/4qm4rFL

0180

3DPrintBunny @3dprintbunny.bsky.social · 13/10/2025

I've been playing with a new string idea, I'm a bit obsessed! 😆

6365

3DPrintBunny @3dprintbunny.bsky.social · 07/10/2025

A Bowl of Bats that can be printed in a single colour or with 2 or 3 contrasting colours. 🦇🦇🦇 Perfect for handing out candy this Halloween! stls and 3mf: than.gs/m/1441212

020

3DPrintBunny @3dprintbunny.bsky.social · 30/09/2025

I printed my skull infill bowl on my @bambulabglobal.bsky.social H2D using GITD filament for the skulls. Look at those teeth! 💀💀💀

040

3DPrintBunny @3dprintbunny.bsky.social · 26/09/2025

I had a request for an infill style bowl with ducks on. I decided to try out using the infill for the subject this time rather than the bowl itself. I used 30% cubic infill which made the duck families stand out nicely.😊 stls and 3mf: makerworld.com/en/models/18...

0110

3DPrintBunny @3dprintbunny.bsky.social · 21/09/2025

A new piece of string art for train lovers. 😊 stl and 3mfs: than.gs/m/1432074

081

3DPrintBunny @3dprintbunny.bsky.social · 16/09/2025

For all you cat lovers out there, this is a fun and easy to print cat racing game. Hold your cat at the top and release to race, or balance them, like I did at the end of the video, and tap the base to start the race. 🐈😊 stls and 3mf: makerworld.com/en/models/17...

0124

3DPrintBunny @3dprintbunny.bsky.social · 12/09/2025

I've been dying to show you guys this. I know it's a bit early for Halloween but what the heck!😁💀💀 A decorative skull bowl with the design created using exposed infill. stls and 3mfs: than.gs/m/1422132

030

3DPrintBunny @3dprintbunny.bsky.social · 08/09/2025

I decided to try printing my leafshell bowl in the lovely Eibos ribbon filament and I absolutely love it😁 Filament link: tidd.ly/3V85lr1 stl and 3mfs: than.gs/m/1418368

050

3DPrintBunny @3dprintbunny.bsky.social · 08/09/2025

This is my new LeafShell bowl, printed in a matte white. It started as a leaf shape but when I created the curve over at the point of the leaf it reminded me a bit of a seashell too. 😊 stls and 3mfs: than.gs/m/1418368

090

3DPrintBunny @3dprintbunny.bsky.social · 27/08/2025

I recently got a request from a friend to create some duck models with kangaroo heads! These are my Duckaroos: they took me a bit out of my comfort zone but were lots of fun to design too😂 stl and 3mf: makerworld.com/en/models/17...

050

3DPrintBunny @3dprintbunny.bsky.social · 18/08/2025

Dangly Shelf Dog, also likes to sit on top of door frames! stls and 3mf: than.gs/m/1403935

060

3DPrintBunny @3dprintbunny.bsky.social · 13/08/2025

A bit of a different, fun and festive, pause and attach print😆 Sound on! stls and 3mfs: than.gs/m/1401448

060

3DPrintBunny @3dprintbunny.bsky.social · 06/08/2025

I've just finished this new Horse string art. The horse is fragmented into parts and held in position by the printed strings. The colour effect is created by printing the top 2mm in a different colour so it can be printed on a single colour printer too.😊 stl and 3mf: makerworld.com/en/models/16...

1221

3DPrintBunny @3dprintbunny.bsky.social · 25/07/2025

A Secret Stash Cat! For money, secret messages and other special things. stl and 3mf: than.gs/m/1385476

060

3DPrintBunny @3dprintbunny.bsky.social · 22/07/2025

I have been working on some bamboo style windchimes. All parts print without supports and you thread the chimes through the frame to create the final windchime. I have spent a while trying to get that lovely melodic sound - what do you think? stls and 3mfs available free here: than.gs/m/1384320

140

3DPrintBunny @3dprintbunny.bsky.social · 14/07/2025

I made some beach themed Croc Toppers! Perfect for the summer! They all print support-free with a peg that screws into the back to attach them. 😊 Stls and 3mf are available on my @thangs3d.bsky.social page and my Patreon. Links below. Thangs: than.gs/m/1379771 Patreon: patreon.com/3dprintbunny

060

3DPrintBunny @3dprintbunny.bsky.social · 01/07/2025

I've been looking at how infill percentage can create contrast. This vase is created in two parts the clear part is printed with 0% infill and the green with 100% infill. The clear filament completely encases the green. I really like the slightly blurry effect it creates. files link in comments

2213

3DPrintBunny @3dprintbunny.bsky.social · 30/06/2025

I did this Peaky Blinders inspired string art as a Patreon request and rather like how it turned out. It can be printed using colour swaps. I did a 1mm layer of white for the wording and it also makes the edges of his coat stand out nicely. stls and 3mf: makerworld.com/en/models/15...

041

3DPrintBunny @3dprintbunny.bsky.social · 26/06/2025

BIG SALE for @bambulabglobal.bsky.social's 3rd Birthday! If you are thinking of buying, please consider supporting me by using my affiliate link below. You pay the same amount but a little bit of it goes to me. 🥰 Affiliate link: shareasale.com/r.cfm?b=2781...

020

3DPrintBunny @3dprintbunny.bsky.social · 24/06/2025

This is my Dolphin Infill Bowl, I used 30% tri-hexagon infill on the body (no walls or top and bottom layers) to create the circles for the dolphins to jump in front of, and I set the dolphin infill to 100% to make them stand out. 🐬🐬🐬 stls and 3mfs: than.gs/m/1364239

1174

3DPrintBunny @3dprintbunny.bsky.social · 17/06/2025

These are my Crosshatch String Vases. They are printed in BambuLab's new translucent Light Jade PLA which I love.🥰 stls and 3mfs: makerworld.com/en/models/15... Affiliate filament link: shareasale.com/r.cfm?b=2354...

030